Regulatory information

FCC ID: OAYSRR5B

Users Manual

Download: PDF
FCCID_4135281

Chassis & Safety ADC GmbH – Peter-Dornier-Strasse 10 – 88131 Lindau To the Federal Communications Commission (FCC) 2018-11-30 Certification for Continental SRR5-B Model / FCC ID: OAYSRR5B IC: 4135A-SRR5B PMN: SRR520 The device under test is manufactured by the grantee (ADC Automotive Distance Control Systems GmbH) and sold as an OEM product. Per CFR 47 Part 95 Subpart M, the grantee must ensure that the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as is the case with this product, the grantee must notify the OEM to notify the end- user. ADC Automotive Distance Control Systems GmbH will supply the following information to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs (in blue) below must be included in the user's manual. 1/2 ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Strasse 10 | 88131Lindau | Germany Phone +49 8382 9699-0 | Fax +49 8382 9699-548 | www.continental-corporation.com Managing Directors: Karlheinz Haupt, Uwe Grau Registered Office: Lindau | Registered Court: Kempten | HRB No. 6408 | VAT ID No.: DE812185464 | Tax No. 127 121 20175 Bank Account: Deutsche Bank | Ravensburg | BIC / SWIFT Code: DEUTDESS650 | NBIC: 650 700 84 | Account No.: 34 000 82 00 | IBAN Code DE90 6507 0084 0340 0082 00

-2- For USA & CANADA FCC ID : OAYSRR5B IC: 4135A-SRR5B Canada only: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Canada & US: Radiofrequency radiation exposure Information: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. US: FCC Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


Document Created: 2018-11-30 16:50:16
Document Modified: 2018-11-30 16:50:16
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC