Test Report

FCC ID: OAYSRR2B

Test Report

Download: PDF
FCCID_1807700

COMPLIANCE WORLDWIDE INC. TEST REPORT 301-12 In Accordance with the Requirements of Federal Communications Commission CFR Title 47 Part 15.249, Subpart C Industry Canada RSS 310, Issue 3 Low Power License-Exempt Radio Communication Devices Intentional Radiators Issued to Continental Automotive ADC Automotive Distance Control Systems GmbH Peter-Dornier-Str. 10 D-88131 Lindau/Bodensee Germany for the SRR2-B Automotive Sensor FCC ID: OAYSRR2B Report Issued on July 20, 2012 Tested by This test report shall not be reproduced, except in full, without written permission from Compliance Worldwide, Inc. Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.complianceworldwide.com

Test Number: 301-12 Issue Date: 7/20/2012 Table of Contents 1. Scope .................................................................................................................................. 3 2. Product Details.................................................................................................................... 3 2.1. Manufacturer .............................................................................................................. 3 2.2. Model Number............................................................................................................ 3 2.3. Serial Number ............................................................................................................ 3 2.4. Description ................................................................................................................. 3 2.5. Power Source............................................................................................................. 3 2.6. EMC Modifications ..................................................................................................... 3 3. Product Configuration ......................................................................................................... 4 3.1. Support Equipment .................................................................................................... 4 3.2. Cables ........................................................................................................................ 4 3.3. Operational Characteristics & Software ..................................................................... 4 3.4. Block Diagram............................................................................................................ 4 4. Measurements Parameters................................................................................................. 5 4.1. Measurement Equipment Used to Perform Test ........................................................ 5 4.2. Measurement & Equipment Setup ............................................................................. 6 4.3. Measurement Procedure............................................................................................ 6 4.4. Choice of Operating Frequencies .............................................................................. 6 5. Measurement Summary...................................................................................................... 7 6. Measurement Data.............................................................................................................. 8 6.1. Antenna Requirement ................................................................................................ 8 6.2. Radiated Field Strength of Fundamental ................................................................... 9 6.3. Radiated Field Strength of Harmonics ..................................................................... 10 6.4. Band Edge Measurements....................................................................................... 11 6.5. Spurious Radiated Emissions .................................................................................. 13 6.6. Occupied Bandwidth (-26 dB) .................................................................................. 20 6.7. 99% Power Bandwidth ............................................................................................. 21 6.9. Public Exposure to Radio Frequency Energy Levels ............................................... 22 7. Test Site Description ......................................................................................................... 23 Page 2 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 1. Scope This test report certifies that the Continental Automotive SRR2-B Automotive Sensor, as tested, meets the FCC Part 15, Subpart C and Industry Canada RSS 310, Issue 3 requirements. The scope of this test report is limited to the test sample provided by the client, only in as much as that sample represents other production units. If any significant changes are made to the unit, the changes shall be evaluated and a retest may be required. 2. Product Details 2.1. Manufacturer: Continental Automotive 2.2. Model Number: SRR2-B 2.3. Serial Number: 0A2C73480200 2.4. Description: Automotive Blind Spot Detection Sensor 2.5. Power Source: 12 Volts DC (Automotive Application) 2.6. Hardware Revs.: B 2.7. Software Rev.: N/A 2.8. EMC Modifications: None Page 3 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 3. Product Configuration 3.1. Support Equipment Device Manufacturer Model Serial No. Comment Continental 2011-01-27 Provides all setup functions for Mode Switch Box N/A Automotive (Creation Date) the SRR2-B Radar Sensor. 3.2. Cables Cable Type (See Note) Length Shield From To Custom Interface Cable 1 Meter No Mode Switch Box SRR2-B Radar Sensor 3.3. Operational Characteristics & Software Continental Automotive provided a Mode Switch Box to control the SRR2-B Radar Sensor. The box provides five operational modes: • Normal mode, bandwidth 182 MHz • Normal mode, bandwidth 188 MHz • CW mode, center frequency • CW mode, lower frequency • CW mode, upper frequency Included with the Mode Switch Box, Continental Automotive provided a six page user’s manual that details the setup and the five modes of operation listed above. This manual provides a complete reference for configuring the Mode Switch Box and the SRR2-B Radar Sensor. 3.4. Block Diagram Mode Switch Box SRR2-B Radar Sensor Power Comm. Supply Interface 12 VDC Custom Interface Cable Automotive Battery Page 4 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 4. Measurements Parameters 4.1. Measurement Equipment Used to Perform Test Device Manufacturer Model No. Serial No. Cal Due Spectrum Analyzer 100 Hz to 26.5 GHz Agilent Tech E4407B MY45104493 12/22/2012 Spectrum Analyzer 100 Hz to 26.5 GHz Agilent Tech E7405A MY45115430 5/11/2014 Spectrum Analyzer 20 Hz to 40 GHz Rohde & Schwarz FSV40 100899 5/26/2013 EMI Receiver 9 kHz to 6.5 GHz Hewlett Packard 8546A 3330A00115 6/8/2014 Microwave Preamp 1 to 26.5 GHz Hewlett Packard 8449B 3008A01323 12/1/2012 Microwave Preamp 2 to 50 GHz Hewlett Packard 83050A 3331A00404 10/20/2012 Notch Filter 24.0 – 24.25 GHz K&L Microwave 5NSP-00002 001 CBU Bilog Antenna 30 MHz – 2 GHz Com-Power AC-220 25509 8/31/2012 Horn Antenna 1 to 18 GHz Electro-Metrics EM-6961 6337 10/19/2012 Horn Antenna 1 to 18 GHz Com-Power AH-118 10078 8/28/2014 Horn Antenna 18 to 26.5 GHz Com-Power AH-826 081051 8/27/2014 Horn Antenna 18 to 40 GHz Com-Power AH-840 03075 8/27/2014 Horn Antenna 18 to 40 GHz Com-Power AH-840 101032 04/6/2013 Horn Antenna 18 to 26.5 GHz Hughes 45820H-2020 037 Not Req’d WR42 to 3.5mm Adapter Hewlett Packard K281C 3032A10738 External Mixer WR28 Hewlett Packard 11970A 3003A08210 Horn Antenna 26.5 to 40 GHz Alpha Industries 861A/599 324 Not Req’d WR28 to 3.5mm Adapter Hewlett Packard R281A 03197 External Mixer WR22 Hewlett Packard 11970Q 3003A01273 Horn Antenna 33 to 50 GHz Alpha Industries 861B/383 133 Not Req’d WR22 to 3.5mm Adapter Hewlett Packard Q281B 00116 External Mixer WR19 Hewlett Packard 11970U 2332A00425 External Mixer WR19 Rohde & Schwarz FS-Z60 100128 Not Req’d Horn Antenna 40 to 60 GHz M/A Com Baytron 3-19-720 N/A WR19 to 1.85mm Adapter Hewlett Packard U281A 00209 External Mixer WR12 Hewlett Packard 11970V 2521A00357 Horn Antenna 50 to 75 GHz Aerowave 15-7025 N/A Not Req’d WR12 to 1.85mm Adapter Hewlett Packard V281B 00369 External Mixer WR10 Hewlett Packard 11970W 2521A00230 Not Req’d Horn Antenna 75 to 110 GHz Alpha Industries 861A/387 359 Anechoic Chamber Keene Ray Proof S-81 R-2338 Not Req’d 3 Meter – Free Space DMM / Temperature Fluke 187 79690058 1/5/2013 DC Variable Source 60 Volt, 3 Amp Hewlett Packard 6296A 7M0599 1/5/2013 3 dB & 10 dB Attenuators 4768-3 9610 Narda Not Req’d DC to 40 GHz 4768-10 9806 Barometric Pressure / Humidity / Extech SD700 Q590483 5/1/2013 Temperature Data Logger Instruments Page 5 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 4. Measurements Parameters 4.2. Measurement & Equipment Setup Test Dates: 6/29/2012 - 7/23/2012 Test Engineers: Larry Stillings/Brian Breault Normal Site Temperature (15 - 35°C): 21.6 Relative Humidity (20 -75%RH): 35 Frequency Range: 150 kHz to 100 GHz Measurement Distance: 3 Meters 9 kHz – 150 kHz to 30 MHz EMI Receiver IF Bandwidth: 120 kHz – 30 MHz to 1 GHz 1 MHz – Above 1 GHz 30 kHz – 150 kHz to 30 MHz EMI Receiver Average Bandwidth: 300 kHz – 30 MHz to 1 GHz 3 MHz – Above 1 GHz Detector Function: Peak, Quasi-Peak & Average 4.3. Measurement Procedure Test measurements were made in accordance FCC Part 15.249, IC RSS-310, Section 3.10: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5850 MHz, and 24.00 - 24.25 GHz. The test methods used to generate the data in this test report is in accordance with ANSI C63.4:2009, American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz 4.4. Choice of Operating Frequencies The Continental Automotive SRR2-B Radar Sensor employs a pulse modulated sweeping signal from 24.05 to 24.23 GHz. Page 6 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 5. Measurements Summary FCC IC Test Test Requirement Rule Rule Report Result Comment Requirement Requirement Section RSS-GEN Unit has an internal PCB Antenna Requirement 15.203 6.1 Compliant 7.1.4 antenna. Radiated Field Strength of 15.249 (a),(c) RSS-310 3.10 6.2 Compliant Fundamental Radiated Field Strength of 15.249 (a),(c) RSS-310 3.10 6.3 Compliant Harmonics 15.249 (d) Band Edge Measurements RSS-310 3.10 6.4 Compliant 15.209 15.249 (d), Spurious Radiated Emissions RSS-GEN 4.9 6.5 Compliant 15.209 ANSI C63.4 Occupied Bandwidth N/A 6.6 Compliant § 13.1.7 RSS-GEN 99% Bandwidth IC RSS-GEN 6.7 Compliant 4.6.1 RSS-GEN Not DUT operates off of an Conducted Emissions 15.207 N/A 7.2.4 Required automotive battery only. 15.319 (i) Public Exposure to Radio 2.1091 RSS-GEN 5.5, 6.9 Compliant Frequency Energy Levels FCC OET RSS 102 Bulletin 65 Page 7 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data 6.1. Antenna Requirement (Section 15.203) Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. Result: The unit under test employs a permanent, non-user accessible internal PCB antenna. Page 8 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data 6.2. Radiated Field Strength of Fundamental (15.249, Section (a), (c)), IC RSS-310 3.10 Requirement: The 3 meter field strength of the fundamental emissions from intentional radiators operated within the 24.00 – 24.25 GHz frequency bands shall comply with the following requirement: 250 millivolts/meter (108 dBµV/m), average mode measurement, 128 dBµV/m Peak mode measurement at 3 meters. Test Results: The Continental Automotive SRR2-B worst case field strength measurements meet the average and peak requirements. Composite Worst Case Data 1 Amplitude Limit Margin Ant Ant Turntable Freq. Pol. Height Azimuth (dBµV/m) (dBµV/m) (dB) (GHz) Peak Avg Peak Avg Peak Avg H/V cm Deg 24.0594 113.45 N/A 128 108 -14.55 N/A V 110 5 24.2301 N/A 82.13 128 108 N/A -25.87 V 110 5 1 All correction factors are included in the measurement values Page 9 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.3. Radiated Field Strength of Harmonics (15.249, Section (a)), IC RSS-310 3.10 Requirement: The 3 meter field strength of the harmonic emissions from intentional radiators operated within the 24.0 to 24.25 GHz frequency bands shall comply with the following: 500 microvolts/meter (54 dBµV/m), average mode measurement. Peak field strength may not be greater than 20 dB above the average limit (74 dBµV/m). Composite Worst Case Data 1 1 Frequency Pk Amp Av Amp Pk Limit Av Limit Margin Polarity Result (GHz) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (dB) (H/V) 48.1838 50.04 N/A 74 N/A -23.96 V Compliant 48.4583 N/A 18.36 N/A 54 -35.64 V Compliant 1 All correction factors are included in the measurement values. Measurement was taken at 0.5 meters Note: There were no other measurable harmonics to 100 GHz. Page 10 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.4. Band Edge Measurements Requirement: Emissions radiated outside of the specified frequency band of 24 GHz to 24.25 GHz, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Test Results: The Continental Automotive SRR2-B meets the applicable band edge requirements. Band Edge Limit Frequency Margin (dBµV/m) (dBµV/m) Result (GHz) (dB) Freq GHz Peak Average Average 24.00 65.25 47.42 54 -6.58 Compliant 24.15 24.25 71.63 51.34 54 -2.66 Compliant 6.4.1. Band Edge Measurements - Lower Band Edge, Peak Detector Page 11 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.4. Band Edge Measurements (continued) 6.4.2. Band Edge Measurements - Lower Band Edge, Average Detector 6.4.3. Band Edge Measurements - Upper Band Edge, Peak Detector Page 12 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.4. Band Edge Measurements (continued) 6.4.4. Band Edge Measurements - Upper Band Edge, Average Detector 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN Requirement: Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Test Note: All correction factors are included in the measurement results. Regulatory Limit: FCC Part 209, Quasi-Peak Frequency Range Distance Limit (MHz) (Meters) (dBµV/m) 0.009 to 0.490 3 128.5 to 93.8 0.490 to 1.705 3 73.8 to 63.0 1.705 to 30 3 69.5 30 to 88 3 40.0 88 to 216 3 43.5 216 to 960 3 46.0 >960 3 54.0 1 Measurements in the 9 to 90 kHz, 110 to 490 kHz and above 1000 MHz ranges employ an average detector. Page 13 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.1. Test Results, 150 kHz to 30 MHz 6.5.1.1. Parallel Antenna 6.5.1.2. Perpendicular Antenna Page 14 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.2. Test Results, 30 MHz to 1 GHz 6.5.2.1. Horizontal Polarity 6.5.2.2. Vertical Polarity Page 15 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.3. Test Results, 1 to 12 GHz 6.5.3.1. Horizontal Polarity 6.5.3.2. Vertical Polarity Page 16 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.4. Test Results, 12 to 18 GHz 6.5.4.1. Horizontal Polarity 6.5.4.2. Vertical Polarity Page 17 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.5. Test Results, 18 to 26.5 GHz 6.5.5.1. Horizontal Polarity 6.5.5.2. Vertical Polarity Page 18 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.5. Spurious Radiated Emissions, 150 kHz to 100 GHz (15.249, Section (d)), IC RSS- GEN 6.5.6. Test Results, 26.5 to 40 GHz 6.5.6.1. Horizontal Polarity 6.5.6.2. Vertical Polarity Page 19 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.6 Occupied Bandwidth (ANSI C63.4, Section 13.7) Requirement: The occupied bandwidth measurements on an intentional radiator shall be made in accordance with the requirements outlined in ANSI C63.4- 2009, Section 13.7. If no bandwidth requirement is specified by the procuring or regulatory agency, measure the bandwidth at –26 dB with respect to the reference level. The resolution bandwidth was set according to Table 5 in Section 13.7 of ANSI C63.4-2009. -26 dB Frequency Bandwidth Result (GHz) (MHz) 24.15 186.75 Compliant 6.6.1. Occupied Bandwidth Plot Page 20 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.7. 99% Power Bandwidth (RSS GEN 4.6.1) Requirement: When an occupied bandwidth value is not specified in the applicable RSS, the transmitted signal bandwidth to be reported is to be its 99% emission bandwidth, as calculated or measured. The measurement bandwidth used shall be 1 to 3 % of the measurement span. Channel 99% Power Frequency Bandwidth Result GHz MHz 24.15 178.75 Compliant 6.7.1. 99% Bandwidth Plot Page 21 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 6. Measurement Data (continued) 6.9. Public Exposure to Radio Frequency Energy Levels (15.247(i) (1.1307 (b)(1)) RSS-GEN 5.5, RSS 102 Note: The following equation is used to determine the output power from the measured worst case field strength: (E x d) 2 P= (30 x G) P = the power in Watts. E = the measured maximum field in V/m G = the numeric gain of the transmitting antenna over an isotropic radiator. d = the distance in meters of the field strength measurement. Peak Antenna Measured Frequency Distance Channel Field Gain1 Output Strength Power (GHz) (dBµV/m) (m) (dBi) (mW) ISM 24.15 113.45 3.0 12.200 4.00 DUT DUT MPE Power Density Output Antenna Limit Channel Distance Result Power Gain (mW/cm²) (cm) (dBm) (dBi) (mW/cm2) (W/m2) (1) (2) (3) (4) (5) ISM 20 6.02 0.50 0.0008930 0.0089300 1 Compliant OP + AG PD = (4 x π x d²) PD = Power Density (mW/cm2) OP = DUT Output Power (dBm) AG = DUT Antenna Gain (dBi) d= MPE Distance (cm) 1. Reference CFR 2.1093(b): For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. 2. Sections 6.2 of this test report. 3. Antenna gain data provided by the client. 4. Power density is calculated from field strength measurement and antenna gain. 5. Reference CFR 1.1310, Table 1: Limits for Maximum Permissible Exposure (MPE), Section (B): Limits for General Population/Uncontrolled Exposure. Page 22 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com

Test Number: 301-12 Issue Date: 7/20/2012 7. Test Site Description Compliance Worldwide is located at 357 Main Street in Sandown, New Hampshire. The test sites at Compliance Worldwide are used for conducted and radiated emissions testing in accordance with Federal Communications Commission (FCC) and Industry Canada standards. A description of the test sites is on file with the FCC (registration number 96392) and Industry Canada (file number IC 3023A-1). The radiated emissions test site is a 3 and 10 meter enclosed open area test site (OATS). Personnel, support equipment and test equipment are located in the basement beneath the OATS ground plane. The conducted emissions site is part of a 16' x 20' x 12' ferrite tile chamber and uses one of the walls for the vertical ground plane required by EN 55022. Both sites are designed to test products or systems 1.5 meter W x 1.5 meter L x 2.0 meter H, floor standing or table top. Page 23 of 23 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com


Document Created: 2012-09-26 12:14:57
Document Modified: 2012-09-26 12:14:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC