Antenna Specifications

FCC ID: O9P-SS1

Operational Description

Download: PDF
FCCID_1344425

LMR-100A TIMES MICROWAVE SYSTEMS LMR -100A ® Flexible Low Loss Communications Coax Ideal for… • Drop-in Replacement for RG-316/RG-174 (uses standard connectors) • Jumper Assemblies in Wireless Communications Systems • Short Antenna Feeder runs • Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable ® • LMR - PVC is designed for low loss general-purpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR. Construction Specifications ® • LMR - PVC-W is a white-jacketed version of LMR- PVC for marine and other indoor/outdoor applications Description Material In. (mm) where color compatibility is desired. Inner Conductor Solid BCCS 0.018 (0.46) Dielectric Solid PE 0.060 (1.52) Outer Conductor Aluminum Tape 0.065 (1.65) • Flexibility and bendability are hallmarks of the LMR- Overall Braid Tinned Copper 0.083 (2.11) 100A cable design. The flexible outer conductor enables Jacket (see table above) 0.110 (2.79) the tightest bend radius available for any cable of similar Mechanical Specifications size and performance. Performance Property Units US (metric) • Low Loss is another hallmark feature of LMR-100A. Bend Radius: installation in. (mm) 0.25 (6.4) Size for size LMR has the lowest loss of any flexible cable Bend Radius: repeated in. (mm) 1 (25.4) and comparable loss to semirigid hard-line cables. Bending Moment ft-lb (N-m) 0.1 (0.014) • RF Shielding is 50 dB greater than typical single Weight lb/ft (kg/m) 0.0092 (.014) shielded coax (40 dB). The multi-ply bonded foil outer Tensile Strength lb (kg) 15 (6.8) Flat Plate Crush lb/in. (kg/mm) 10 (0.18) conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables). Environmental Specifications • Weatherability: LMR-100A cables designed for Performance Property 0 F o C Installation Temperature Range -40/+185 -40/+85 outdoor exposure incorporate the best materials for UV Storage Temperature Range -94/+185 -70/+85 resistance and have life expectancy in excess of 20 years. Operating Temperature Range -40/+185 -40/+85 • Connectors: A wide variety of connectors are available for LMR-100A cable, including all common interface Electrical Specifications Performance Property Units US (metric) types, reverse polarity, and a choice of solder or non- Cutoff Frequency GHz 63 solder center pins. Most LMR connectors employ crimp Velocity of Propagation % 66 outer attachment using standard hex crimp sizes. Dielectric Constant NA 2.30 • Cable Assemblies: All LMR-100A cable types are Time Delay nS/ft (nS/m) 1.54 (5.05) Impedance ohms 50 available as pre-terminated cable assemblies. Refer to Capacitance pF/ft (pF/m) 30.8 (101.1) the section on FlexTech for further details. Inductance uH/ft (uH/m) 0.077 (0.25) Shielding Effectiveness dB >90 Part Description Stock DC Resistance Part Number Application Jacket Color Code Inner Conductor ohms/1000ft (/km) 81.0 (266) LMR-100A-FR Indoor-Riser CMR FRPE Black 54037 Outer Conductor ohms/1000ft (/km) 9.5 (31.2) LMR-100A-PVC Indoor/Outdoor PVC Black 54119 Voltage Withstand Volts DC 500 LMR-100A-PVC-W Indoor/Outdoor PVC White 54200 Jacket Spark Volts RMS 2000 PVC = Poly Vinyl Chloride; MTO = Made to Order Peak Power kW 0.6 8 (800) TMS-COAX • www.timesmicrowave.com

LMR-100A TIMES MICROWAVE SYSTEMS Attenuation vs. Frequency (typical) (db per 100 feet) 100 Attenuation 10 1 10 100 1,000 10,000 Frequency (MHz) Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 Attenuation dB/100 ft 3.9 5.1 8.9 10.9 15.8 22.8 30.1 33.2 35.2 39.8 64.1 Attenuation dB/100 m 12.9 16.7 29.4 35.8 51.9 74.9 98.7 109.0 115.5 130.6 210.3 Avg. Power kW 0.230 0.180 0.100 0.083 0.057 0.039 0.029 0.027 0.025 0.022 0.013 Calculate Attenuation = (0.709140) • FMHz + (0.001740) • FMHz (interactive calculator available at http://www.timesmicrowave/telecom) Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading TC-100-SM TC-100-TM Connectors Inner Outer Finish* Part Stock VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) SMA male Straight Plug TC-100-SM 3190-1551 <1.25:1 (<3 ) Hex Solder Crimp S S / G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8) TNC male Straight Plug TC-100-TM 3190-1552 <1.25:1 (<3 ) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair CT-240/200/195/100 Install Tools Type Part Number Stock Code Description Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200 and 240 connectors Cutting Tool CCT-01 3190-1544 Cable end flush cut tool Replacement Blade RB-01 3190-1609 Replacement blade for cutting tool CCT-01 (800) TMS-COAX • www.timesmicrowave.com 9

S2406BFNM Omni-directional Antenna Innovative Technology for a Connected World High Gain Omni-directional collinear antenna The Laird Technologies S2406BFNM, adds a direct fixed N-male connectorized version to the suite of high performance omni-directional collinear antennas. The fixed N-male connector allows users to mount the antenna directly to any access point or NEMA enclosure that is connectorized with an N female connector. The S2406BFNM incorporates all of the performance features, adherence to specification and product consistency that the industry has come to appreciate in Laird Technologies antennas. Features Applications • Direct access point mounting • Metropolitan mesh networks • High gain-to-size ratio value • Hight to medium density customer premise location • Rugged UV stable, weather resistant radome Parameter SPECIFICATIONS Part Number S2406BFNM Frequency (MHz) 2400 - 2500 MHz Gain (dBi) 8 dBi (nominal) Maximum VSWR 1.7:1 E-Plane (-3 dB beamwidth) 14º H-Plane (-3 dB beamwidth) Omni-directional Polarization Vertical linear Input Impedance (Ohms) 50 Maximum Input Power (Watts) 50 Connector Type (M) Type fixed N Dimensions in.(cm) 19.5 x.75 (495 x19) Weight lb. (kg) 0.45 (.20) Orientation Upright or inverted Radome UV stable fiberglass Mount Style Direct / Pole global solutions: local support TM Americas: +1.847 839.6907 IAS-AmericasEastSales@lairdtech.com Europe: +1.32.80.7866.12 ANT-DS-S2406BFNM 0509 IAS-EUSales@lairdtech.com Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Asia: +1.65.6.243.8022 Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. All Laird Technologies’ products are sold pursuant to the Laird Technologies’ terms and conditions of sale IAS-AsiaSales@lairdtech.com in effect from time to time, a copy of which will be furnished upon request. www.lairdtech.com © 2009 All Rights Reserved Laird Technologies is a registered trademark of Laird Technologies, Inc

8 7 6 5 4 3 2 1 REVISIONS BILL OF MATERIAL ITEM NAME MATERIAL QTY ZONE REV. DESCRIPTION DATE DRAWN BY 1 Radome TPEE 55D, Color: Black 1PC All A Antenna, 2.4-2.5 GHz, Black, N-Male 10/7/2008 BPH F 2 Connector N-TYPE Plug, Brass, Plated Black Chrome 1SET F 3 Copper Tube Brass 1PC 4 Spring Phosphor Bronze 1PC 5 Cable RG178 Coaxial Cable 1PC 6 Heat Shrink Tube Heat Shrink Tube, Black 1PC E E D D 175 3 1 , 3 , 4 , 5 , 6 20.00 19.00 Detail A-A Detail B-B 2 13.2 0.2 7.2 0.2 C C 0.58 MAX 0.40 MAX 1.00 MAX 1.00 MAX Detail A-A Detail B-B B B NOTES: 1. Frequency range: 2.4-2.5GHz 2. VSWR: </= 2.0 3. Gain: TYP 5.0 dBi 4. Connector: N Plug 5. Color: Black 6. Operating temperature range: -30 C To 70 C MATERIAL: THIRD ANGLE PROJECTION 1751 WILKINING COURT 7. All materials are ROHS compliant Refer to Bill of Materials FINISH: SCHAUMBURG, IL 60173 Refer to Bill of Materials DO NOT SCALE DRAWING USA APPROVALS DATE INTERPRET DIMENSIONING AND TOLERANCING IN TITLE: A DESIGN BY: ACCORDANCE WITH A ASME Y14.5M-1994 TOLERANCES UNLESS Antenna, 2.4-2.5 GHz, Black, N-Male CHECKED BY: OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS ENG MGR: SIZE DWG. NO. REV ANGLE: 30' The component(s), including any plating or coatings, supplied per this drawing must be compliant with EU Directive UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES. LAIRD TECHNOLOGIES PRODUCTION: 0 PLACE DECIMAL: 1 PLACE DECIMAL: 2 PLACE DECIMAL: 0.5 0.25 0.13 A2 N24-5-NM-B A 2002/95/EC (RoHS Directive). RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPYRIGHT, LAIRD TECHNOLOGIES 2008, ALL RIGHTS RESERVED. PURCHASING: SURFACE ROUGHNESS 1.6 SCALE: PREVIOUS# SHEET 1 OF 1 8 7 6 5 4 3 2 1


Document Created: 2010-09-03 12:02:05
Document Modified: 2010-09-03 12:02:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC