RF Exposure Info

FCC ID: O9C-SL3055

RF Exposure Info

Download: PDF
FCCID_828496

RF EXPOSURE REPORT REPORT NO.: SA940413L11A MODEL NO.: SL-3055 FCC ID: O9C-SL3055 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: 3Com Corporation ADDRESS: 350 Campus Dirve, Marlborough, MA 10752-3064. U.S.A. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. Report No.: SA940413L11A 1 Issued: July 19, 2007 Reference No.: 960608H04

RF Exposure Measurement 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Electric Field Magnetic Field Power Density Average Time Range Strength (V/m) Strength (A/m) (mW/cm2) (minutes) (MHz) (A)Limits For Occupational / Control Exposures 300-1500 … … F/300 6 1500-100,000 … … 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 6 1500-100,000 … … 1.0 30 F = Frequency in MHz Report No.: SA940413L11A 2 Issued: July 19, 2007 Reference No.: 960608H04

3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm2. If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance 20cm. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4 EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device Report No.: SA940413L11A 3 Issued: July 19, 2007 Reference No.: 960608H04

6 Test Results 6.1 Antenna Gain The EUT have two combinations of antenna type. Please refer to following table. 2.4GHz Gain 5GHz Gain No. Brand Antenna type (dBi) (dBi) 1 WSS003 Dual Band Dipole 1.17 2.02 2 3Com Dipole 1.50 2.50 The antenna 2 was chosen for final test. 6.2 Output Power Into Antenna & RF Exposure value: Operated in 5470MHz ~ 5725MHz: (15.407) Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 9 5500 23.659 0.008 1.0 14 5600 11.402 0.004 1.0 19 5700 16.482 0.006 1.0 Report No.: SA940413L11A 4 Issued: July 19, 2007 Reference No.: 960608H04


Document Created: 2007-08-01 21:38:16
Document Modified: 2007-08-01 21:38:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC