RF Exposure

FCC ID: O6ZC41W-500

RF Exposure Info

Download: PDF
FCCID_3030931

    http://www.kctl.co.kr



   * RF Exposure
   1. Regulation
   According to §15.247(i), systems operating under the provisions of this section shall be operated in a
   manner that ensures that the public is not exposed to radio frequency energy levels in excess of the
   Commission's guidelines. See § 1.1307(b)(1) of this Chapter.

   Limits for Maximum Permissive Exposure: RF exposure is calculated.
                                  Electric Field          Magnetic Field           Power Density    Averaging Time
      Frequency Range
                                 Strength [V/m]           Strength [A/m]              [㎽/㎠]            [minute]
                                 Limits for General Population / Uncontrolled Exposure
           0.3 ~ 1.34              614                    1.63                         *(100)              30
           1.34 ~ 30              824/f                  2.19/f                       *(180/f2)            30
           30 ~ 300                27.5                  0.073                           0.2               30
         300 ~ 1 500                /                       /                          f/1 500             30
        1 500 ~ 15 000              /                       /                            1.0               30
   f=frequency in ㎒, *= plane-wave equivalent power density

   MPE (Maximum Permissive Exposure) Prediction
   Predication of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01
    S  PG 4R 2       R      PG 4S    
   S = power density [㎽/㎠]
   P = Power input to antenna [㎽]
   G = Power gain of the antenna in the direction of interest relative to an isotropic radiator
   R = distance to the center of radiation of the antenna [㎝]




KCTL-TIR001-002/0                                Page: ( 1 ) / ( 2 ) Pages

                 This test report shall not be reproduced, except in full, without the written approval


    http://www.kctl.co.kr



   2. RF Exposure Compliance Issue
   The information should be included in the user’s manual:
   This appliance and its antenna must not be co-located or operation in conjunction with any other
   antenna or transmitter. A minimum separation distance of 20 ㎝ must be maintained between the
   antenna and the person for this appliance to satisfy the RF exposure requirements.



   3. Calculation Result of RF Exposure
                         Target        Tune up    Max tune up Max tune up                           Power Density
                                                                          Ant Gain      Ant Gain                           Limit
         Mode            power        tolerance     power       power                                 at 20 ㎝
                         [㏈m]            [㏈]        [㏈m]         [㎽]       [㏈i]           [㎽]         [㎽/㎠]            [㎽/㎠]
     WiFi 5G Band 1
      802.11n_HT40       17.00         ±2.00        19.00        79.43          1.90     1.55        0.024 48         1.000 00
    _MIMO_5 190 ㎒
         RF4CE
    _ Lowest_2 425 ㎒
                          0.50         ±2.00         2.50         1.78          5.59     3.62        0.001 28         1.000 00
         Total                                                                                        0.02576         1.000 00


   4. Target power and tolerance, Max tuneup power
   -WiFi 5G Band 1
                                  Target power              Tolerance            Max tuneup power           Average Power
          Mode
                                     [㏈m]                     [㏈]                     [㏈m]                      [㏈m]
       WiFi 5G Band 1
    802.11n_HT40_MIMO                17.00                    ±2.00                    19.00                    18.21
          _5 190 ㎒
       WiFi 5G Band 1
    802.11n_HT40_MIMO                17.00                    ±2.00                    19.00                    17.85
          _5 230 ㎒


   -RF4CE
                                  Target power              Tolerance            Max tuneup power           Average Power
          Mode
                                     [㏈m]                     [㏈]                     [㏈m]                      [㏈m]
      Lowest_2 425 ㎒                 0.50                     ±2.00                    2.50                         2.28

      Middle_2 450 ㎒                 0.50                     ±2.00                    2.50                         1.85

      Highest_2 475 ㎒                0.50                     ±2.00                    2.50                         1.75




KCTL-TIR001-002/0                                   Page: ( 2 ) / ( 2 ) Pages

                 This test report shall not be reproduced, except in full, without the written approval



Document Created: 2016-06-10 09:25:13
Document Modified: 2016-06-10 09:25:13

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC