SAR Scan Plots

FCC ID: O55182317

RF Exposure Info

Download: PDF
FCCID_3493922

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Cheek/GSM 850 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.290 mW/g Left Cheek/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.86 V/m; Power Drift = -0.343 dB Peak SAR (extrapolated) = 0.370 W/kg SAR(1 g) = 0.275 mW/g; SAR(10 g) = 0.188 mW/g Maximum value of SAR (measured) = 0.290 mW/g SAR Plots Plot No.: 1#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Tilt/GSM 850 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.088 mW/g Left Tilt/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.10 V/m; Power Drift = 0.468 dB Peak SAR (extrapolated) = 0.182 W/kg SAR(1 g) = 0.139 mW/g; SAR(10 g) = 0.098 mW/g Maximum value of SAR (measured) = 0.149 mW/g SAR Plots Plot No.: 2#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Cheek/GSM 850 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.199 mW/g Right Cheek/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.43 V/m; Power Drift = -0.181 dB Peak SAR (extrapolated) = 0.233 W/kg SAR(1 g) = 0.168 mW/g; SAR(10 g) = 0.116 mW/g Maximum value of SAR (measured) = 0.181 mW/g SAR Plots Plot No.: 3#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Tilt/GSM 850 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.087 mW/g Right Tilt/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.73 V/m; Power Drift = 0.008 dB Peak SAR (extrapolated) = 0.112 W/kg SAR(1 g) = 0.084 mW/g; SAR(10 g) = 0.059 mW/g Maximum value of SAR (measured) = 0.089 mW/g SAR Plots Plot No.: 4#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.95 mho/m; εr = 55.79; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Worn Back/GSM 850 Low/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.19 mW/g Body Worn Back/GSM 850 Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.5 V/m; Power Drift = 0.097 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.790 mW/g Maximum value of SAR (measured) = 1.18 mW/g SAR Plots Plot No.: 5#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.95 mho/m; εr = 55.79; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Worn Back/GSM 850 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.858 mW/g Body Worn Back/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.4 V/m; Power Drift = 0.018 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.802 mW/g; SAR(10 g) = 0.585 mW/g Maximum value of SAR (measured) = 0.848 mW/g SAR Plots Plot No.: 6#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.95 mho/m; εr = 55.79; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Worn Back/GSM 850 High/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.959 mW/g Body Worn Back/GSM 850 High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.0 V/m; Power Drift = 0.058 dB Peak SAR (extrapolated) = 1.17 W/kg SAR(1 g) = 0.896 mW/g; SAR(10 g) = 0.645 mW/g Maximum value of SAR (measured) = 0.954 mW/g SAR Plots Plot No.: 7#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GPRS bands-4slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.95 mho/m; εr = 55.79; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/GSM 850 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.846 mW/g Body Back/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.5 V/m; Power Drift = -0.005 dB Peak SAR (extrapolated) = 0.980 W/kg SAR(1 g) = 0.768 mW/g; SAR(10 g) = 0.558 mW/g Maximum value of SAR (measured) = 0.810 mW/g SAR Plots Plot No.: 8#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Cheek/GSM 1900 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.431 mW/g Left Cheek/GSM 1900 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.57 V/m; Power Drift = -0.148 dB Peak SAR (extrapolated) = 0.643 W/kg SAR(1 g) = 0.407 mW/g; SAR(10 g) = 0.250 mW/g Maximum value of SAR (measured) = 0.436 mW/g SAR Plots Plot No.: 9#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Tilt/GSM Band 2 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.225 mW/g Left Tilt/GSM Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.306 W/kg SAR(1 g) = 0.198 mW/g; SAR(10 g) = 0.118 mW/g Maximum value of SAR (measured) = 0.217 mW/g SAR Plots Plot No.: 10#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Cheek/GSM 1900 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.382 mW/g Right Cheek/GSM 1900 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.36 V/m; Power Drift = -0.136 dB Peak SAR (extrapolated) = 0.540 W/kg SAR(1 g) = 0.353 mW/g; SAR(10 g) = 0.215 mW/g Maximum value of SAR (measured) = 0.379 mW/g SAR Plots Plot No.: 11#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Tilt/GSM 1900 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.173 mW/g Right Tilt/GSM 1900 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.85 V/m; Power Drift = 0.046 dB Peak SAR (extrapolated) = 0.244 W/kg SAR(1 g) = 0.160 mW/g; SAR(10 g) = 0.096 mW/g Maximum value of SAR (measured) = 0.174 mW/g SAR Plots Plot No.: 12#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GSM bands; Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 52.64; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.31, 8.31, 8.31); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Worn Back/GSM 1900 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.769 mW/g Body Worn Back/GSM 1900 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.4 V/m; Power Drift = 0.090 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.669 mW/g; SAR(10 g) = 0.367 mW/g Maximum value of SAR (measured) = 0.728 mW/g SAR Plots Plot No.: 13#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: GPRS bands-4slots; Frequency: 1909.8 MHz;Duty Cycle: 1:2 Medium parameters used: f = 1909.8 MHz; σ = 1.51 mho/m; εr = 52.04; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.31, 8.31, 8.31); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/GSM 1900 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.780 mW/g Body Back/GSM 1900 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.8 V/m; Power Drift = -0.036 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 0.708 mW/g; SAR(10 g) = 0.387 mW/g Maximum value of SAR (measured) = 0.762 mW/g SAR Plots Plot No.: 14#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Cheek/WCDMA Band 5 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.195 mW/g Left Cheek/WCDMA Band 5 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.11 V/m; Power Drift = -0.022 dB Peak SAR (extrapolated) = 0.233 W/kg SAR(1 g) = 0.176 mW/g; SAR(10 g) = 0.120 mW/g Maximum value of SAR (measured) = 0.188 mW/g SAR Plots Plot No.: 15#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Tilt/WCDMA Band 5 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.073 mW/g Left Tilt/WCDMA Band 5 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.59 V/m; Power Drift = -0.015 dB Peak SAR (extrapolated) = 0.088 W/kg SAR(1 g) = 0.067 mW/g; SAR(10 g) = 0.048 mW/g Maximum value of SAR (measured) = 0.072 mW/g SAR Plots Plot No.: 16#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Cheek/WCDMA Band 5 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.343 mW/g Right Cheek/WCDMA Band 5 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.80 V/m; Power Drift = 0.041 dB Peak SAR (extrapolated) = 0.514 W/kg SAR(1 g) = 0.338 mW/g; SAR(10 g) = 0.221 mW/g Maximum value of SAR (measured) = 0.404 mW/g SAR Plots Plot No.: 17#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.32; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.50, 10.50, 10.50); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Tilt/WCDMA Band 5 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.145 mW/g Right Tilt/WCDMA Band 5 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.23 V/m; Power Drift = -0.017 dB Peak SAR (extrapolated) = 0.341 W/kg SAR(1 g) = 0.182 mW/g; SAR(10 g) = 0.118 mW/g Maximum value of SAR (measured) = 0.204 mW/g SAR Plots Plot No.: 18#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.95 mho/m; εr = 55.79; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/WCDMA Band 5 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.504 mW/g Body Back/WCDMA Band 5 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.1 V/m; Power Drift = -0.033 dB Peak SAR (extrapolated) = 0.611 W/kg SAR(1 g) = 0.485 mW/g; SAR(10 g) = 0.357 mW/g Maximum value of SAR (measured) = 0.515 mW/g SAR Plots Plot No.: 19#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 1880.0 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880.0 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Cheek/WCDMA Band 2 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.610 mW/g Left Cheek/WCDMA Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.03 V/m; Power Drift = -0.028 dB Peak SAR (extrapolated) = 0.801 W/kg SAR(1 g) = 0.541 mW/g; SAR(10 g) = 0.338 mW/g Maximum value of SAR (measured) = 0.580 mW/g SAR Plots Plot No.: 20#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 1880.0 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880.0 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Left Tilt/WCDMA Band 2 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.250 mW/g Left Tilt/WCDMA Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.0 V/m; Power Drift = 0.070 dB Peak SAR (extrapolated) = 0.368 W/kg SAR(1 g) = 0.229 mW/g; SAR(10 g) = 0.131 mW/g Maximum value of SAR (measured) = 0.247 mW/g SAR Plots Plot No.: 21#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 1880.0 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880.0 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Cheek/WCDMA Band 2 Mid/Area Scan (101x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.426 mW/g Right Cheek/WCDMA Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.28 V/m; Power Drift = -0.021 dB Peak SAR (extrapolated) = 0.587 W/kg SAR(1 g) = 0.387 mW/g; SAR(10 g) = 0.235 mW/g Maximum value of SAR (measured) = 0.426 mW/g SAR Plots Plot No.: 22#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 1880.0 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880.0 MHz; σ = 1.40 mho/m; εr = 39.35; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.71, 8.71, 8.71); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Right Tilt/WCDMA Band 2 Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.187 mW/g Right Tilt/WCDMA Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.03 V/m; Power Drift = -0.171 dB Peak SAR (extrapolated) = 0.267 W/kg SAR(1 g) = 0.169 mW/g; SAR(10 g) = 0.100 mW/g Maximum value of SAR (measured) = 0.181 mW/g SAR Plots Plot No.: 23#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSZ170616003-20 DUT: 3G Feature Phone; Type: LOGIC B3G; Communication System: 3G Bands; Frequency: 1880.0 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880.0 MHz; σ = 1.52 mho/m; εr = 52.64; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(8.31, 8.31, 8.31); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/WCDMA Band 2 Mid/Area Scan (91x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.853 mW/g Body Back/WCDMA Band 2 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.8 V/m; Power Drift = -0.122 dB Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.754 mW/g; SAR(10 g) = 0.414 mW/g Maximum value of SAR (measured) = 0.812 mW/g SAR Plots Plot No.: 24#


Document Created: 2017-08-02 11:48:48
Document Modified: 2017-08-02 11:48:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC