Cover Letter (Modular Approval Request).pdf.pdf

FCC ID: O4D-IC400

Cover Letter(s)

Download: PDF
FCCID_2313411

FCC ID: O4D-IC400




              Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

June 30, 2014

Dear Application Examiner,


We, FUJITSU LIMITED, claim that the EUT, FCC ID: O4D-IC400 is a WLAN module
and would like to have your authorization as a modular approval specific to the mobile RF exposure
condition.


The requirements of section 15.212 of FCC rules have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of this
   module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has
    buffered data input, it is integrated in chip CPU (MAC IC) and POWER IC.

3. “The modular transmitter must have its own power supply regulation.” The part number
    of this regulator is POWER IC.

4. “The modular transmitter must comply with the antenna requirements of section 15.203
    and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission,
    unique antenna connector and photo of antennas are shown in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was
   tested in a stand-alone configuration via a USB extender. Please see section Photographs
   of Test Configuration in the test report, the EUT was plugged in this extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please see
   exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users
   Manual, there are instructions give to the OEM on how to label the end product.


FCC ID: O4D—IC400




7. "The modular transmitter must comply with any specific rule or operating requirements
   applicable to the transmitter and the manufacturer must provide adequate instructions
   along with the module to explain any such requirements." The EUT is compliant with all
   applicable FCC rules. Detail instructions for maintaining compliance are given in the
   Users Manual.



8. "The modular transmitter must comply with any applicable RF exposure requirements."
   The EUT is compliant with all applicable RF exposure requirements. RF Exposure is
   addressed in the RF exposure exhibition.




Please contact me if you have any further question. Thanks for your attention.




Best Regards,




Daniel Lee
Vice President
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch



Document Created: 2014-06-30 21:19:26
Document Modified: 2014-06-30 21:19:26

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC