RF Exposure Info (MPE).pdf.pdf

FCC ID: O4D-IC400

RF Exposure Info

Download: PDF
FCCID_2313394

RF EXPOSURE REPORT REPORT NO.: SA140604C02 MODEL NO.: Fujitsu 2.4G Mesh Radio Module FCC ID: O4D-IC400 RECEIVED: Jun. 04, 2014 TESTED: Jun. 18 ~ Jun. 19, 2014 ISSUED: Jun. 20, 2014 APPLICANT: FUJITSU LIMITED ADDRESS: Kyusyu R&D Center, 2-1, Momochihama 2-chome, Sawara-ku, Fukuoka-shi, Fukuoka-ken, 814-8588, JAPAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA140604C02 1 of 5 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1. CERTIFICATION............................................................................................................................ 4 2. RF EXPOSURE ............................................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)....................................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................................. 5 2.3 CLASSIFICATION.......................................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER................................................ 5 Report No.: SA140604C02 2 of 5 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140604C02 Original release Jun. 20, 2014 Report No.: SA140604C02 3 of 5 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: WisReed Module MODEL NO.: Fujitsu 2.4G Mesh Radio Module BRAND: FUJITSU APPLICANT: FUJITSU LIMITED TESTED: Jun. 18 ~ Jun. 19, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: Fujitsu 2.4G Mesh Radio Module) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Jun. 20, 2014 Ivy Lin / Specialist APPROVED BY : , DATE : Jun. 20, 2014 Ken Liu / Senior Manager Report No.: SA140604C02 4 of 5 Report Format Version 5.0.0

2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER POWER MAX POWER ANTENNA DISTANCE LIMIT MODE DENSITY (dBm) GAIN (dBi) (cm) (mW/cm2) (mW/cm2) 1TX 28.33 3.12 20 0.278 1 2TX 28.12 5.48 20 0.456 1 NOTE: For 2TX: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2 /NANT]= 5.48 dBi ---END--- Report No.: SA140604C02 5 of 5 Report Format Version 5.0.0


Document Created: 2018-08-02 12:30:46
Document Modified: 2018-08-02 12:30:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC