RF exposure

FCC ID: O3YCU165

RF Exposure Info

Download: PDF
FCCID_4064525

FCC ID : O3YCu16s RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz ~ 6 GHz and < 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. mt s 10 is 20 2s mm 150 so 7 u16 155 194 300 27 ss a o 137 4so 22 as 67 so u> aas i6 3 10 6e 2 900 G 2 a7 es 7o 1500 12 a a7 29 a SAR Test Exclusion 1900 U * 3. 4t 5t Threshold(rmW) 2450 10 19 20 38 as 3600 s is 21 32 m 5200 7 13 20 26 3 5400 6 13 19 26 52 5eoo 6 12 19 25 a1 ‘ The 1—g and 10—3 SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [{max. power of channel, including tune—up tolerance, mW)/(min. test separation distance, mm}] +. [/f(GH)] < 3.0 for 1—g SAR and < 7.5 for 10—9 extremity SAR.where 1(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is < 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion

FCC ID : O3YCU165 BT4.0 BLE The Worst Case Mode 2402-2480MHz Detector PEAK 2402MHz 2±1dBm 2440MHz 2±1dBm 2480MHz 2±1dBm Remark: The worst case gain of the antenna is 0dBi. 0dBi logarithmic terms convert to numeric result is nearly 1 Frequency Maximum Peak Tune Up Tune Up Result Limit (MHz) Conducted Power(dBm) Power(mW) Output Power (dBm) 2402 2.24 3 1.995 0.62 3 2440 2.40 3 1.995 0.62 3 2480 1.68 3 1.995 0.63 3 Threshold at which no SAR required is 0.63≤ 3.0 for 1-g SAR, Separation distance is 5mm.


Document Created: 2018-11-01 10:17:29
Document Modified: 2018-11-01 10:17:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC