Operational Description Revised

FCC ID: NTAFP200INT

Operational Description

Download: PDF
FCCID_554414

FP-200SAIN TDMA Electronic Container Seal Features Telematics Wireless FP-200SAIN TDMA Electronic Container • Fully interoperable with existing CVISN Seal is an ideal solution for secure freight management systems. TDMA systems: The TDMA seal identifies the cargo, records the sealing - Weigh-station bypass - Border crossing event and any subsequently detected tampering events, - Port Access and Gate Operations and communicates its stored data at highway speeds to a • Suitable for trucking and railway CVISN-compatible infrastructure of TDMA Readers. applications Existing Weigh-station bypass systems and expedited border • Programmable at 2.44 GHz by Telematics crossing facilities could be used to provide and derive benefit Wireless’ FP-200HH Handheld Reader/Terminal from the automated in-motion identification of containers • 5-year battery life and the status of their seals. • Internal container installation • Remote (RF) programming/setting The FP-200SAIN is fully compatible with the open standard • Real time clock for event recording TDMA ASTM v6 protocol. This protocol is used extensively by - Tampering events the existing infrastructure of Weigh-station bypass systems - Sealing events as well as • Encrypted RF data communications expedited border crossing operations. The same protocol allows • Reusable for exceptionally widespread tracking of cargo containers and • Ruggedized: the status of their seals from the point of entry into the US, - Casing/enclosure meets MIL spec through an entire route until the final destination. - Hermetically sealed • Shock/Vibration-proof installation • Low Cost

FP-200SAIN TDMA Electronic Container Seal Seal Characteristics • Real time clock • Integral magnetic door sensor • 256 bits Read/Write Scratchpad • 64 bytes of freight information - Readable by any TDMA Reader at 915 MHz - Writeable Only at 2.44 GHz by Telematics Wireless FP-200HH Handheld Reader/Terminal (writing to external memory by any TDMA Reader) • Fast status report readable by any ASTM v6 Reader • Seal specific information readable by seal Reader - Current time - Up to 8 sealing event records consisting of the following information: activation or deactivation of seal, user ID, mechanical seal number and time of event. - Up to 24 tampering event records consisting of the following information: tampered sensor, tampering start time and duration • Handheld Reader programming/settings: - Seal time - Enable/Disable any sensor - Set sensor’s polarity - Set freight information - Activate/Deactivate - Clear all or specific information • Internal battery status • 5 year battery operation Seal Specifications • Slotted Aloha protocol - compatible with ASTM v6 • Transmit & Receive frequencies of 915 MHz and 2.44 GHz (Frequency of operation is factory-set within the ISM band to 915 MHz and 2.44 GHz) • Transmit & Receive data rate of 500 Kbps • Built-in antennas • Active Transmitters provide superior immunity to interference • 5 year battery operation • Programmable Link Validation code • Programmable Agency Codes • Small size: L3.5” x W1.5” x D2.5” (89 x 38 x 63) mm • Operating temperature: -40ºC – +85ºC • Mechanical shock: - 100g 2 msec per MIL-STD-810E Method 516.4 Telematics Wireless USA Corp. - 40g 11 msec per MIL-STD-810E Method 516.4 3330 NW 53rd St. Suite 302 • Mechanical vibration 2g, 5 - 500HZ per MIL-STD-810E Fort Lauderdale, FL 33309 Method 514.5 Procedure I Table 514.4-AII Tel: (954) 446-2333, (714) 544-2548 • FCC approved Fax: (954) 484-9761, (714) 832-9655 nwitkin@telematics-wireless.com www.telematics-wireless.com


Document Created: 2005-05-24 10:56:26
Document Modified: 2005-05-24 10:56:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC