Modular Approval Cover Letter

FCC ID: NS912XN58-26

Cover Letter(s)

Download: PDF
FCCID_1662088

Microhard Systems Inc.
150 CountryHills Landing NWCalgary Alberta Canada


                                                                          (FCC ID:NS912XNS8—26)

Gentlemen:

Regarding to the FCC 15.212, Microhard Systems Inc. would like to request modular approval for
the submission FCC ID: NS91L2XN358—26. The manufacturer confirms that the product
complies with numbered requirements identified below:

    1. "The modular transmitter must have its own RF Shielding"
         The radio portion of this module has been shielded, please see exhibition External Photo.

   2. "The modular transmitter must have buffered modulation/data inputs"
       The EUT has buffered data inputs; it is integrated in chip M24C32WMN6.

   3. "The modular transmitter must have its own power supply regulation"
       The EUT interface provides 3.3 VDC, and have its own VCO inside.

   4. "The modular transmitter must comply with the antenna and transmission system
      requirements of Sections 15.203, 15.204(b) and 15.204(c) "
       The EUT meets the antenna requirements. It is unique antenna connector, and with a
       external omin antenna. Refer to the photo of antennas are shown in the test report.

   5. "The modular transmitter must be tested in a stand—alone configuration."            .
       The EUT is tested in a access point configuration via mini PCI socket. Please see the photo
       of test setup photo of the report.

   6.   "The modular transmitter must be labeled with it‘s own FCC ID number."
        The EUT has it‘s own FCC ID and the label is visible.

   7. "The modular transmitter must comply with any specific rule or operating requirements
      applicable to the transmitter and the manufacture must provide adequate instructions along
      with module to explain any such requirement."
      The EUT is comply with all applicable FCC Rules. Warning detail refer to the user manual.

   8. "The modular transmitter must comply with any applicable RF exposure requirements."
      The EUT is comply with all applicable RF exposure requirements. See this RF exposure
        report.

Sincerely,

Microhard Systems Inc.




H                   a
Director



Document Created: 2012-03-20 10:18:54
Document Modified: 2012-03-20 10:18:54

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC