Test report

FCC ID: NPKAVC922

Test Report

Download: PDF
FCCID_861777

Test report No. : 27KE0187—HO—A—R1 L Page : 1 of 56 Underwriters Issued date : October 12, 2007 Laboratories UL Japan, Inc. Revised date : October 26, 2007 FCC ID : NPKAVC922 RADIO TEST REPORT Test Report No. : 27KE0187—HO—A—R1 Applicant $ SANYO Electric Co., Ltd. Type of Equipment s WLAN Module Model No. & QXxXAVCO22———P FCC ID $ NPKAVCO22 Test standard $ FCC Part 15 Subpart C 2007 Section 15.207, Section 15.247 Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the above regulation. 4. The test results in this report are traceable to the national or international standards. 5. Original test report number of this report is 27KE0187—HO—A. Date of test: September 8 to October 5, 2007 Tested by: 5* maeees. / 7 3xA Takashi Nakazawa Hisayoshi Sato EMC Services EMC Services /M/fifi 7.Jf;‘ Shinya Watanabe * Yutaka Yoshida EMC Services EMC Services ‘Ta-kah,iro Hatakeda EMC Services Approved by : Tetsuo Maeno Site Manager of EMC Services This laboratory is accredited by the NVLAP LAB CODE ° 200572—0, U.S.A. The tests reported herein have been mV & performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://uljapan.co.jp/eme/nvlap.htm NVLAP LAB CODE: 200572—0 UL Japan, Inc. Head Office EMC Lab. 4383—326 Asama—cho, Ise—shi, Mie—ken 516—0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MFO6Ob (18.06.07)

Test report No. : 27KE0187-HO-A-R1 Page : 2 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 CONTENTS PAGE SECTION 1: Client information...............................................................................................3 SECTION 2: Equipment under test (E.U.T.) ..........................................................................3 SECTION 3: Test specification, procedures & results ...........................................................4 SECTION 4: Operation of E.U.T. during testing....................................................................8 SECTION 5: Conducted Emission .........................................................................................10 SECTION 6: Spurious Emission.............................................................................................11 SECTION 7: 6dB Bandwidth..................................................................................................12 SECTION 8: Maximum Peak Output Power ........................................................................12 SECTION 9: Peak Power Density ..........................................................................................12 APPENDIX 1: Photographs of test setup...............................................................................13 Conducted Emission ........................................................................................................13 Spurious Emission (Radiated) ........................................................................................14 Worst Case Position (Horizontal: Z-axis/ Vertical:Y-axis) .........................................15 APPENDIX 2: Data of EMI test ..............................................................................................16 Conducted Emission ........................................................................................................16 6dB Bandwidth ................................................................................................................23 Maximum Peak Output Power.......................................................................................26 Radiated Spurious Emission (below 1GHz) ..................................................................28 Radiated Spurious Emission (above 1GHz) ..................................................................35 Conducted Spurious Emission........................................................................................42 Conducted emission Band Edge compliance.................................................................49 Power Density ..................................................................................................................50 99%Occupied Bandwidth ...............................................................................................53 APPENDIX 3:Test instruments ...............................................................................................55 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 3 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 1: Client information Company Name : SANYO Electric Co., Ltd. Address : 1-1 Sanyo-cho, Daito City, Osaka 574-8534, Japan Telephone Number : +81-72-870-6132 Facsimile Number : +81-72-875-9358 Contact Person : Keiji Hirao SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : WLAN Module Model No. : QXXAVC922---P Serial No. : 1 Rating : DC3.3V Country of Manufacture : Japan Receipt Date of Sample : August 22, 2007 Condition of EUT : Production model (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No modification by the test lab. 2.2 Product Description Model No: QXXAVC922---P (referred to as the EUT in this report) is the WLAN Module. Clock frequency(ies) in the system : 40MHz Equipment Type : Transceiver Frequency of Operation : 2412-2462MHz Bandwidth & Channel Spacing : 20MHz & 5MHz Modulation : 11b: DSSS (DBPSK, DQPSK, CCK) 11g: OFDM (BPSK, QPSK, 16QAM, 64QAM) Power Supply : DC3.3V Antenna Type : Chip Dielectric Antenna Antenna Connector Type : Chip Coaxial Connector (HSC) Antenna Gain : 2.14 dBi (max) UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 4 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part15 Subpart C: 2007 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz FCC 15.31 (e) As this EUT does not have a regulator, the supplied voltage depends on the installed device. Therefore the certification is limited only for the device which can provide voltage(DC3.3V) constantly. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is mounted inside of the host device in which the EUT is installed. Therefore, the equipment complies with the antenna requirement of Section 15.203. UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 5 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 3.2 Procedures and results No. Item Test Procedure Specification Remarks Deviation Worst margin Results 1 Conducted FCC: ANSI C63.4:2003 FCC: Section 15.207 - N/A Complied emission 7. AC powerline 14.0dB conducted emission 9.10800MHz, measurements AV, N IC: RSS-Gen 7.2.2 IC: RSS-Gen 7.2.2 9.94450MHz, AV, N 2 6dB Bandwidth FCC: ANSI C63.4:2003 FCC: Section Conducted N/A Complied 13. Measurement of 15.247(a)(2) intentional radiators IC: RSS-Gen 4.6.2 IC: RSS-210 A8.2(a) 3 Maximum Peak FCC: ANSI C63.4:2003 FCC: Section Conducted N/A Complied Output Power 13. Measurement of 15.247(b)(3) intentional radiators IC: RSS-Gen 4.8 IC: RSS-210 A8.4(4) See data. 4 Restricted Band FCC: ANSI C63.4:2003 FCC: Section 15.247 (d) Conducted N/A Complied Edges 13. Measurement of Radiated intentional radiators IC: - IC: RSS-210 A8.5 5 Power Density FCC: ANSI C63.4:2003 FCC: Section 15.247 (e) Conducted N/A Complied 13. Measurement of intentional radiators IC: - IC: RSS-210 A8.2(b) 6 Spurious FCC: ANSI C63.4:2003 Conducted N/A [Tx] Complied FCC: Section15.247(d) Emission 13. Measurement of Radiated 6.7dB intentional radiators 119.996MHz Vert., QP IC: RSS-210 A8.5 [Rx] IC: RSS-Gen 4.9 RSS-Gen 7.2.1 and 8.7dB RSS-Gen 4.10 7.2.3 119.996MHz Vert., QP Note: UL Japan, Inc.’s EMI Work Procedures No.QPM05 and QPM15. *These tests were also referred to "Guidance on Measurement of Digital Transmission Systems Operating under Section15.247". *These tests were performed without any deviations from test procedure except for additions or exclusions. 3.3 Addition to standards No. Item Test Procedure Specification Remarks Deviation Worst margin Results 1 99％ Occupied IC: RSS-Gen 4.6.1 IC: RSS-Gen 4.6.1 Conducted N/A N/A N/A Band Width UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 6 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 3.4 Uncertainty The following uncertainties have been calculated to provide a confidence level of 95% using a coverage factor k=2. Conducted Emission The measurement uncertainty for this test is ±2.66dB. The data listed in this test report has enough margin, more than the site margin. Spurious Emission (Radiated) The measurement uncertainty for this test using Biconical antenna is ±4.59dB(3m). The measurement uncertainty for this test using Logperiodic antenna is ±4.62dB(3m). The measurement uncertainty for this test using Horn antenna is ±5.27dB. The data listed in this test report has enough margin, more than the site margin. Other test except Conducted Emission and Spurious Emission (Radiated) The measurement uncertainty for this test is ±3.0dB. UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 7 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 3.5 Test Location UL Japan, Inc. Head Office EMC Lab. *NVLAP Lab. code: 200572-0 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 FCC IC Registration Width x Depth x Size of Other Registration Number Height (m) reference ground plane (m) / rooms Number horizontal conducting plane No.1 semi-anechoic 313583 IC4247 19.2 x 11.2 x 7.7m 7.0 x 6.0m No.1 Power chamber source room No.2 semi-anechoic 655103 IC4247-2 7.5 x 5.8 x 5.2m 4.0 x 4.0m - chamber No.3 semi-anechoic 148738 IC4247-3 12.0 x 8.5 x 5.9m 6.8 x 5.75m No.3 chamber Preparation room No.3 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.4 semi-anechoic 134570 IC4247-4 12.0 x 8.5 x 5.9m 6.8 x 5.75m No.4 chamber Preparation room No.4 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.5 semi-anechoic - - - 6.0 x 6.0 x 3.9m 6.0 x 6.0m chamber No.6 shielded - - 4.0 x 4.5 x 2.7m 4.75 x 5.4 m - room No.6 measurement - - 4.75 x 5.4 x 3.0m 4.75 x 4.15 m - room No.7 shielded room - - 4.7 x 7.5 x 2.7m 4.7 x 7.5m - No.8 measurement - - 3.1 x 5.0 x 2.7m N/A - room * Size of vertical conducting plane (for Conducted Emission test) : 2.0 x 2.0m for No.1, No.2, No.3, and No.4 semi-anechoic chambers and No.3 and No.4 shielded rooms. 3.6 Test set up, Test instruments and Data of EMI Refer to APPENDIX 1 to 3. UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 8 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 4: Operation of E.U.T. during testing 4.1 Operating Modes Test Mode Tested frequency Conducted emission IEEE802.11b Transmitting (Tx), 11Mbps 2412MHz Spurious Emission IEEE802.11g Transmitting (Tx), 54Mbps 2437MHz 2462MHz IEEE802.11b/g Receiving (Rx) 2437MHz 6dB Bandwidth IEEE802.11b Transmitting (Tx), 11Mbps 2412MHz Maximum Peak Output Power IEEE802.11g Transmitting (Tx), 54Mbps 2437MHz Power Density 2462MHz 99% Occupied Bandwidth Restricted Band Edge IEEE802.11b Transmitting (Tx), 11Mbps 2412MHz IEEE802.11g Transmitting (Tx), 54Mbps 2462MHz Transmitting duty was 100% on all tests. As a result of preliminary test, the formal test was performed with the above modes, which had the maximum rated power. (Refer to Maximum Peak Output Power) UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 9 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 4.2 Configuration and peripherals A 1 DC 3.3V [Used for test setup] B 2 C 3 E F D G 4 5 [CVCF] AC 120V/60Hz AC 120V/60Hz [Used for Radiated emission test] [Used for Conducted emission test] : Standard Ferrite Core * Cabling and setup were taken into consideration and test data was taken under worse case conditions. Description of EUT and Support equipment No. Item Model number Serial number Manufacturer Remark A Antenna Board QXXAVC922-B 1 SANYO EUT B WLAN Module QXXAVC922---P 1 SANYO EUT C Printed Circuit Board - - SANYO - D PC Card - J030602A SANYO - E Note PC 1952-D65 L3-DM297 lenovo - F AC Adapter 92P1160 11S92P1160Z1ZBGH6B6DM7 lenovo - G DC Power Supply PW18-1.3AT 08016530 KENWOOD - TMI List of cables used No. Name Length (m) Shield Cable Connector 1 Antenna Cable 0.2 Unshielded Unshielded 2 2.0 *1) Unshielded Unshielded DC Cable 3.5 *2) 3 DC Cable 1.8 Unshielded Unshielded 4 AC Cable 1.0 Unshielded Unshielded 5 AC Cable 1.8 Unshielded Unshielded *1) Used for Conducted emission test. *2) Used for Radiated emission test. UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 10 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 5: Conducted Emission Test Procedure and conditions EUT was placed on a urethane platform of nominal size, 0.5m by 1.0m, raised 80cm above the conducting ground plane. The rear of tabletop was located 40cm to the vertical conducting plane. The rear of EUT, including peripherals aligned and flushed with rear of tabletop. All other surfaces of tabletop were at least 80cm from any other grounded conducting surface. EUT was located 80cm from a Line Impedance Stabilization Network (LISN)/ Artificial mains Network (AMN) and excess AC cable was bundled in center. For the tests on EUT with other peripherals (as a whole system) I/O cable and AC cables that were connected to the peripherals were bundled in center. They were folded back and forth forming a bundle 30cm to 40cm long and were hanged at a 40cm height to the ground plane. All unused 50ohm connectors of the LISN(AMN) were resistivity terminated in 50ohm when not connected to the measuring equipment. The AC Mains Terminal Continuous disturbance Voltage has been measured with the EUT in a Semi Anechoic Chamber. The EUT was connected to a LISN (AMN). An overview sweep with peak detection has been performed. Detector : quasi-peak and average detector (IF BW 9 kHz) Measurement range : 0.15-30MHz Test data : APPENDIX 2 Test result : Pass UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 11 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 6: Spurious Emission [Conducted] Test Procedure The Out of Band Emission was measured with a spectrum analyzer connected to the antenna port. Test data : APPENDIX 2 Test result : Pass [Radiated] Test Procedure EUT was placed on a urethane platform of nominal size, 0.5m by 1.0m, raised 80cm above the conducting ground plane. The Radiated Electric Field Strength intensity has been measured in a Semi Anechoic Chamber with a ground plane and at a distance of 3m(Below 10GHz) and 1m(Upper 10GHz). The height of the measuring varied between 1 and 4m and EUT was rotated a full revolution in order to obtain the maximum value of the electric field intensity. The measurements were performed for both vertical and horizontal antenna polarization with the Test Receiver, or the Spectrum Analyzer (in linear mode). The test was made with the detector (RBW/VBW) in the following table. When using Spectrum analyzer, the test was made with adjusting span to zero by using peak hold. In any 100kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator confirmed 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on a radiated measurement. 20dBc was applied to the frequency over the limit of FCC 15.209 / Table 2 of RSS-210 2.7 (IC) and outside the restricted band of FCC15.205 / Table 1 of RSS-210 2.7 (IC). Frequency Below 1GHz Above 1GHz Instrument used Test Receiver / Spectrum Analyzer Spectrum Analyzer Detector QP: BW 120kHz(T/R) PK: RBW:1MHz/VBW: 1MHz IF Bandwidth 20dBc : RBW: 100kHz AV: RBW:1MHz/VBW:10Hz VBW: 300kHz (S/A) 20dBc : RBW:100kHz/VBW:300kHz - The carrier level and noise levels were confirmed at each position of X, Y and Z axes of EUT to see the position of maximum noise, and the test was made at the position that has the maximum noise. Test data : APPENDIX 2 Test result : Pass UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124

Test report No. : 27KE0187-HO-A-R1 Page : 12 of 56 Issued date : October 12, 2007 Revised date : October 26, 2007 FCC ID : NPKAVC922 SECTION 7: 6dB Bandwidth Test Procedure The bandwidth was measured with a spectrum analyzer connected to the antenna port. Test data : APPENDIX 2 Test result : Pass SECTION 8: Maximum Peak Output Power Test Procedure The Maximum Peak Output Power was measured with a power meter (tested bandwidth: 50MHz) connected to the antenna port. It was measured based on "Power Output Option 1" of "Guidance on Measurement of Digital Transmission Systems Operating under Section15.247 ". Test data : APPENDIX 2 Test result : Pass SECTION 9: Peak Power Density [Conducted] Test Procedure The Peak Power Density was measured with a spectrum analyzer connected to the antenna port. It was measured based on "PSD Option 1" of "Guidance on Measurement of Digital Transmission Systems Operating under Section15.247 ". Test data : APPENDIX 2 Test result : Pass UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124


Document Created: 2007-10-26 17:17:59
Document Modified: 2007-10-26 17:17:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC