RF Exposure Info 2

FCC ID: NOIKBN289

RF Exposure Info

Download: PDF
FCCID_1363430

APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION D1: PHANTOM

Schmid & Partner Engineering AG s p e a g Zeughausstrasse 43, 8004 Zurich, Switzerland Phone +41 1 245 9700, Fax +41 1 245 9779 info@speag.com, hittp://www.speag.com Certificate of Conformity / First Article Inspection Item Oval Flat Phantom EL1 4.0 Type No QD OVA 001B Series No 1003 and higher Manufacturer SPEAG Zeughausstrasse 43 CH—8004 Zurich Switzerland Tests Complete tests were made on the prototype units QD OVA 001 AA 1001, QD OVA 001 AB 1002, pre—series units QD OVA 001 BA 1003—1005 as well as on the series units QD OVA 001 BB, 1006 ff. Test Requirement Details Units tested Dimensions Compliant with the standard IEC Dimensions of bottom Prototypes, 62209 — 2 [1] requirements for 300 MHz — 6 GHz: Samples longitudinal = 600 mm (max. dimension) width= 400 mm (min dimension) depth= 190 mm Shape: ellipse Material thickness Compliant with the standard IEC Bottom plate: Prototypes, 62209 —— 2 [1] requirements 2.0mm +/ 0.2mm All items Material Dielectric parameters for required 300 MHz — 6 GHz Material parameters frequencies Rel. permittivity = 4 +/—1, sample Loss tangent s 0.05 Material resistivity The material has been tested to be DEGMBE based Equivalent compatible with the liquids defined in simulating liquids phantoms, the standards if handled and cleaned Material according to the instructions. sample Observe Technical Note for material compatibility. Sagging Compliant with the requirements <1% typical < 0.8% if Prototypes, according to the standard. filled with 155mm of Sample Sagging of the flat section when filled HSL900 and without testing with tissue simulating liquid DUT below Standards [1] EC 62209 — 2, Draft Version 0.9, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation and Procedures Part 2: Procedure to determine the Specific Absorption Rate (SAR) for ... including accessories and multiple transmitters", December 2004 Conformity Based on the sample tests above, we certify that this item is in compliance with the standard [1]. Date 07.07.2005 $ e__a 5chm%qAG Signature / Stamp Zoughasfstrasse 4378004 Z\Wfld/ f Phong 41 124 aArdis — info@speag.com, httpiiiwww.speag.com Doc No 881—QD OVA 001B—C Page 1(1)


Document Created: 2010-10-19 17:23:12
Document Modified: 2010-10-19 17:23:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC