Test Report

FCC ID: NMTTHGR511-01

Test Report

Download: PDF
FCCID_4047738

FCC PART 15.231 TEST REPORT For IDT Technology Limited 9/F, Kaiser Estate, 41 Man Yue Street, Hung Hom, Kowloon, Hong Kong FCC ID: NMTTHGR511-01 Report Type: Product Type: Original Report thermo meter Report Number: RXM180830054-00 Report Date: 2018-09-29 Jerry Zhang Reviewed By: EMC Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 FCC §15.203 - ANTENNA REQUIREMENT.............................................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 FCC §15.205, §15.209, §15.231 (E) - RADIATED EMISSIONS ...............................................................................8 APPLICABLE STANDARD ..............................................................................................................................................8 EUT SETUP ..................................................................................................................................................................8 EMI TEST RECEIVER SETUP .........................................................................................................................................9 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................9 TEST PROCEDURE ......................................................................................................................................................10 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................10 TEST RESULTS SUMMARY ..........................................................................................................................................10 TEST DATA ................................................................................................................................................................10 FCC §15.231(C) – 20 DB BANDWIDTH TESTING ................................................................................................14 REQUIREMENT ...........................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................14 TEST DATA ................................................................................................................................................................14 FCC §15.231(E) - DEACTIVATION TESTING ......................................................................................................16 APPLICABLE STANDARD ............................................................................................................................................16 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................16 TEST DATA ................................................................................................................................................................16 Page 2 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) EUT Name: thermometer EUT Model: THGR511 FCC ID: NMTTHGR511-01 Rated Input Voltage: DC3V from battery External Dimension: 50mm(L)*25.2mm(W)*95mm(H) Serial Number: 180830054 EUT Received Date: 2018.09.01 Objective This report is prepared on behalf of IDT Technology Limited in accordance with Part 2, Subpart J, Part 15, Subparts A, and C of the Federal Communications Commission’s rules The tests were performed in order to determine compliance with FCC Rules Part 15, Subpart C, and section 15.203, 15.205, 15.209, and 15.231 rules. Related Submittal(s)/Grant(s) No related submittal(s) Test Methodology All measurements detailed in this Test Report were performed in accordance with ANSI C63.10-2013 “American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices”. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). Measurement Uncertainty Parameter Measurement Uncertainty Occupied Channel Bandwidth ±5 % 30M~200MHz: 4.55 dB,200M~1GHz: 5.92 dB,1G~6GHz: 4.98 dB, Unwanted Emissions, radiated 6G~18GHz: 5.89 dB,18G~26.5G:5.47 dB,26.5G~40G:5.63 dB Temperature ±1℃ Humidity ±5% DC and low frequency voltages ±0.4% Duty Cycle 1% AC Power Lines Conducted 3.12 dB (150 kHz to 30 MHz) Emission Page 3 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 897218,the FCC Designation No. : CN1220. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062D. Page 4 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 SYSTEM TEST CONFIGURATION Justification The system was configured in testing mode which was provided by manufacturer. The device operation frequency is 433.904 MHz, switch can change channel 1,2,3 for difference transmission sequence, all of the channels were test for transmission sequence in the report, and channel 1 was test for other items. Equipment Modifications No modifications were made to the unit tested. EUT Exercise Software No software was used in test. Block Diagram of Test Setup Page 5 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207 (a) Conducted Emissions Not applicable §15.205, §15.209, §15.231 (e) Radiated Emissions Compliance §15.231 (c) 20dB Bandwidth Compliance §15.231 (e) Transmission Time Compliance Not Applicable: the device was powered by battery. Page 6 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 FCC §15.203 - ANTENNA REQUIREMENT Applicable Standard An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. Result: Compliant. The EUT has 1 internal antenna, which was permanently attached, fulfill the requirement of this section. Please refer to the EUT photos. Page 7 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 FCC §15.205, §15.209, §15.231 (e) - RADIATED EMISSIONS Applicable Standard FCC §15.205, §15.209, §15.231 (e) (e) Intentional radiators may operate at a periodic rate exceeding that specified in paragraph (a) of this section and may be employed for any type of operation, including operation prohibited in paragraph (a) of this section, provided the intentional radiator complies with the provisions of paragraphs (b) through (d) of this section, except the field strength table in paragraph (b) of this section is replaced by the following: Fundamental frequency Field strength of fundamental Field strength of spurious emissions (MHz) (microvolts/meter) (microvolts/meter) 40.66-40.70 1,000 100 70-130 500 50 1 130-174 500 to 1,500 50 to 1501 174-260 1,500 150 1 260-470 1,500 to 5,000 150 to 5001 Above 470 5,000 500 1 Linear interpolations. In addition, devices operated under the provisions of this paragraph shall be provided with a means for automatically limiting operation so that the duration of each transmission shall not be greater than one second and the silent period between transmissions shall be at least 30 times the duration of the transmission but in no case less than 10 seconds. EUT Setup Below 1 GHz: Page 8 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Above 1 GHz: The radiated emission tests were performed in the 3 meters test site, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC 15 § 15.209, 15.205 and 15.231. EMI Test Receiver Setup The system was investigated from 30 MHz to 5 GHz. During the radiated emission test, the test receiver was set with the following configurations: Frequency Range RBW Video B/W IF B/W Measurement 30 MHz – 1000 MHz 100 kHz 300 kHz 100 kHz PK 1 GHz – 5 GHz 1 MHz 3 MHz / PK Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2017-12-11 2018-12-11 Farad Test Software EZ-EMC V1.1.4.2 N/A N/A Sunol Sciences Antenna JB3 A060611-1 2017-11-10 2020-11-10 Unknown Coaxial Cable C-NJNJ-50 C-0400-01 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0075-01 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-1000-01 2018-09-05 2019-09-05 HP Amplifier 8447D 2727A05902 2018-09-05 2019-09-05 Spectrum Agilent E4440A SG43360054 2018-01-04 2019-01-04 Analyzer ETS-Lindgren Horn Antenna 3115 000 527 35 2016-01-05 2019-01-04 Unknown Coaxial Cable C-SJSJ-50 C-0800-01 2018-09-05 2019-09-05 AFS42-00101800- MITEQ Amplifier 2001271 2018-09-05 2019-09-05 25-S-42 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Page 9 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. According to §15.231, Intentional radiators operating under the provisions of this Section shall demonstrate compliance with the limits on the field strength of emissions, based on the average value of the measured emissions. As an alternative, compliance with the limits in the above table may be based on the use of measurement instrumentation with a CISPR quasi-peak detector Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the data in the following table, the EUT complied with the CFR47 §15.205, §15.209, §15.231 (e). Test Data Environmental Conditions Temperature: 27.2 C Relative Humidity: 46 % ATM Pressure: 100 kPa The testing was performed by Vern Shen, Blake Yang, Sunny Cen on 2018-09-17. Test mode: Transmitting(Test performed at X,Y,Z Axis, X axis was the worst) Page 10 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Field Strength (Peak) Frequency Receiver Rx Antenna Cable Amplifier Corrected 15.231 (e) Reading Polar Factor loss Gain Amplitude Limit Margin (MHz) (dBμV) (H/V) (dB/m) (dB) (dB) (dBμV/m) (dBμV/m) (dB) Operating Frequency: 433.904 MHz 433.904 32.8 H 16.48 2.65 0 51.93 92.87 40.94 433.904 44.24 V 16.48 2.65 0 63.37 92.87 29.5 867.808 32.71 H 21.76 4.09 26.68 31.88 72.87 40.99 867.808 35.99 V 21.76 4.09 26.68 35.16 72.87 37.71 1301.71 56.36 H 24.53 1.57 35.95 46.51 74.00 27.49 1301.71 55.64 V 24.53 1.57 35.95 45.79 74.00 28.21 1735.62 52.82 H 26.19 1.65 36.06 44.6 74.00 29.4 1735.62 51.37 V 26.19 1.65 36.06 43.15 74.00 30.85 2169.52 60.02 H 27.64 1.74 36.18 53.22 74.00 20.78 2169.52 56.53 V 27.64 1.74 36.18 49.73 74.00 24.27 2603.42 54.88 H 28.67 1.88 36.38 49.05 74.00 24.95 2603.42 52.06 V 28.67 1.88 36.38 46.23 74.00 27.77 3037.33 58.46 H 30.19 2.18 37.04 53.79 74.00 20.21 3037.33 53.98 V 30.19 2.18 37.04 49.31 74.00 24.69 Note: According to C63.10-2013, clause 6.6.4.3, where limits are specified by regulations for both average and peak detection, if the maximized peak measured value complies with the average limit (20 dBc below the Peak limit), then it is unnecessary to perform an average measurement. Page 11 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Horizontal: Fundamental with band-stop filter Page 12 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Vertical: Fundamental with band-stop filter Page 13 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 FCC §15.231(c) – 20 dB BANDWIDTH TESTING Requirement Per 15.231(c), The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. Bandwidth is determined at the points 20 dB down from the modulated carrier. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2017-12-11 2018-12-11 Sunol Antenna JB3 A060611-1 2017-11-10 2020-11-10 Sciences Unknown Coaxial Cable C-NJNJ-50 C-0400-01 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0075-01 2018-09-05 2019-09-05 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Procedure The waveform was received by the test antenna which was connected to the spectrum analyzer, plot the 20 dB bandwidth. Test Data Environmental Conditions Temperature: 27.2 C Relative Humidity: 46 % ATM Pressure: 100 kPa The testing was performed by Vern Shen on 2018-09-17. Test Mode: Transmitting Please refer to following table and plot. Channel Frequency 20 dB Bandwidth Limit Result (MHz ) (kHz) (kHz) 433.904 8.40 1084.76 Pass Note: Limit = 0.25% * Center Frequency = 0.25%*433.904MHz = 1084.76kHz Page 14 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 20 dB Bandwidth Page 15 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 FCC §15.231(e) - DEACTIVATION TESTING Applicable Standard Per 15.231(e) In addition, devices operated under the provisions of this paragraph shall be provided with a means for automatically limiting operation so that the duration of each transmission shall not be greater than one second and the silent period between transmissions shall be at least 30 times the duration of the transmission but in no case less than 10 seconds. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2017-12-11 2018-12-11 Sunol Antenna JB3 A060611-1 2017-11-10 2020-11-10 Sciences Unknown Coaxial Cable C-NJNJ-50 C-0400-01 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0075-01 2018-09-05 2019-09-05 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 27.2 C Relative Humidity: 55 % ATM Pressure: 100.4 kPa The testing was performed by Vern Shen on 2018-09-29. Test Mode: Transmitting Test Result: Compliance. Please refer to following plot. Deactivate Deactivate Silent Time Time Silent Time Channel Time Limit Result Limit (s) (s) (s) (s) 1 0.369 <1 52.20 >11.07 Pass 2 0.369 <1 57.97 >11.07 Pass 3 0.369 <1 59.77 >11.07 Pass Page 16 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Channel 1: Silent period Transmission duration Page 17 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Channel 2: Silent period Transmission duration Page 18 of 19

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RXM180830054-00 Channel 3: Silent period Transmission duration *****END OF REPORT***** Page 19 of 19


Document Created: 2019-09-11 08:44:55
Document Modified: 2019-09-11 08:44:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC