test report

FCC ID: NMTAD162

Test Report

Download: PDF
FCCID_1522739

TEST REPORT Report No.: HK11061730-1 IDT Technology Limited Application For Certification (Original Grant) (FCC ID: NMTAD162) Transceiver Prepared and Checked by: Approved by: Digitally signed by Terry Chan Location: Intertek Testing Services Hong Kong Ltd. Signed On File Kung Wing Cheong, Steven Chan Chi Hung, Terry Engineer Assistant Supervisor Date: August 12, 2011 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

INTERTEK TESTING SERVICES GENERAL INFORMATION IDT Technology Limited BRAND NAME: Oregon Scientific, MODEL: AD162 FCC ID: NMTAD162 Grantee: IDT Technology Limited Grantee Address: Block C, 9/F., Kaiser Estate, Phase 1, 41 Man Yue Street, Hunghom, Kowloon, Hong Kong. Contact Person: Thomas Wong Tel: 86-755-29701087 Fax: 86-755-29709021 e-mail: thomaswong@idthk.com Manufacturer: N/A Manufacturer Address: N/A Brand Name: Oregon Scientific Model: AD162 Type of EUT: Transceiver Description of EUT: USB Dongle with AP2 Serial Number: N/A FCC ID: NMTAD162 Date of Sample Submitted: June 29, 2011 Date of Test: July 12, 2011 Report No.: HK11061730-1 Report Date: August 12, 2011 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Report No.: HK11061730-1 FCC ID: NMTAD162 i

INTERTEK TESTING SERVICES SUMMARY OF TEST RESULT IDT Technology Limited BRAND NAME: Oregon Scientific, MODEL: AD162 FCC ID: NMTAD162 TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies 15.247(e) / RSS-210 A8.1 N/A Separation 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of 15.247(e) / RSS-210 A8.1 N/A Hopping Frequency Antenna Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.6 N/A Transmitter Power Line Conducted 15.207 / RSS-Gen 7.2.4 Pass Emissions Transmitter Field Strength 15.227 / RSS-310 3.8 N/A Transmitter Field Strength 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, 15.231(a) / RSS-210 A1.1.1 N/A Bandwidth and Timing Requirement Transmitter Field Strength, 15.231(e) / RSS-210 A1.1.5 N/A Bandwidth and Timing Requirement Transmitter Field Strength and 15.239 / RSS-210 A2.8 N/A Bandwidth Requirement Transmitter Field Strength and 15.249 / RSS-210 A2.9 Pass Bandwidth Requirement Transmitter Field Strength and 15.235 / RSS-310 3.9 N/A Bandwidth Requirement Receiver / Digital Device Radiated 15.109 / RSS-210 2.5 N/A Emissions Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Report No.: HK11061730-1 FCC ID: NMTAD162 ii

INTERTEK TESTING SERVICES Table of Contents 1.0 General Description ....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 2 2.4 Equipment Modification................................................................................. 2 2.5 Measurement Uncertainty ............................................................................. 3 2.6 Support Equipment List and Description........................................................ 3 3.0 Emission Results ........................................................................................... 4 3.1 Field Strength Calculation ............................................................................. 4 3.2 Radiated Emission Configuration Photograph ............................................... 5 3.3 Radiated Emission Data ............................................................................... 5 3.4 Conducted Emission Configuration Photograph ............................................ 5 3.5 Conducted Emission Data............................................................................. 5 4.0 Equipment Photographs................................................................................ 9 5.0 Product Labelling ........................................................................................... 9 6.0 Technical Specifications................................................................................ 9 7.0 Instruction Manual ......................................................................................... 9 8.0 Miscellaneous Information ............................................................................ 9 8.1 Measured Bandedge .................................................................................. 10 8.2 Discussion of Pulse Desensitization ............................................................ 11 8.3 Calculation of Average Factor ..................................................................... 11 8.4 Emissions Test Procedures ........................................................................ 11 9.0 Equipment List ............................................................................................. 12 Report No.: HK11061730-1 FCC ID: NMTAD162 iii

INTERTEK TESTING SERVICES 1.0 General Description 1.1 Product Description The Equipment Under Test (EUT) is a USB transceiver, which is operating at 2403 - 2480MHz, with 1MHz channel spacing. The EUT is powered by USB port. This USB dongle is using to communicate with corresponding Chest Belt or Watch. It can download the data from corresponding chest belt or watch and allow user to store exercise data and upload to the web for analysis and fitness management. Antenna Type : Internal, Integral For electronic filing, the brief circuit description is saved with filename: descri.pdf. 1.2 Related Submittal(s) Grants The PC portion of this transceiver has been authorized by Declaration of the Conformity procedure. The transceiver (Watch) (with FCC ID: NMTSE833) for this transceiver (USB Dongle) has been authorized by Certification procedure. 1.3 Test Methodology Both AC mains line-conducted and radiated emission measurements were performed according to the procedures in ANSI C63.4 (2003). All radiated measurements were performed in an Open Area Test Site. Preliminary scans were performed in the Open Area Test Site only to determine worst case modes. All radiated tests were performed at an antenna to EUT distance of 3 meters, unless stated otherwise in the “Justification Section” of this Application. 1.4 Test Facility The open area test site and conducted measurement facility used to collect the radiated data is located at Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. This test facility and site measurement data have been placed on file with the FCC. Report No.: HK11061730-1 FCC ID: NMTAD162 1

INTERTEK TESTING SERVICES 2.0 System Test Configuration 2.1 Justification The system was configured for testing in a typical fashion (as a customer would normally use it), and in the confines as outlined in ANSI C63.4 (2003). The device is powered by USB port. For maximizing emissions, the EUT was rotated through 360°, the antenna height was varied from 1 meter to 4 meters above the ground plane, and the antenna polarization was changed. This step by step procedure for maximizing emissions led to the data reported in Exhibit 3.0. The unit was operated standalone and placed in the center of the turntable. The equipment under test (EUT) was configured for testing in a typical fashion (as a customer would normally use it). The EUT was mounted to a plastic stand if necessary and placed on the wooden turntable, which enabled the engineer to maximize emissions through its placement in the three orthogonal axes. 2.2 EUT Exercising Software There was no special software to exercise the device. Once the unit is powered up, it transmits the RF signal continuously. 2.3 Special Accessories There are no special accessories necessary for compliance of this product. 2.4 Equipment Modification Any modifications installed previous to testing by IDT Technology Limited will be incorporated in each production model sold/leased in the United States. No modifications were installed by Intertek Testing Services Hong Kong Ltd. Report No.: HK11061730-1 FCC ID: NMTAD162 2

INTERTEK TESTING SERVICES 2.5 Measurement Uncertainty When determining of the test conclusion, the Measurement Uncertainty of test has been considered. 2.6 Support Equipment List and Description 1. Lenovo Notebook (Model: T61, S/N: L3-CF468) 2. Lenovo Notebook (Model: SL500, S/N: ML-DXMM3) 3. Smart-Drive External 1394 HDD (Model: HD3-SU2FW, S/N: 0800261) 4. 1 x 1394 cable with length of 0.8 meter long 1 x USB cable with length of 0.7 meter long (Provided by Intertek) 5. Software: ANTware II v2.2.0 (Provided by Applicant) Report No.: HK11061730-1 FCC ID: NMTAD162 3

INTERTEK TESTING SERVICES 3.0 Emission Results Data is included of the worst case configuration (the configuration which resulted in the highest emission levels). A sample calculation, configuration photographs and data tables of the emissions are included. 3.1 Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any), Average Factor (optional) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CF - AG - AV where FS = Field Strength in dBµV/m RA = Receiver Amplitude (including preamplifier) in dBµV CF = Cable Attenuation Factor in dB AF = Antenna Factor in dB AG = Amplifier Gain in dB AV = Average Factor in dB In the following table(s), the reading shown on the data table reflects the preamplifier gain. An example for the calculations in the following table is as follows: FS = RR + LF where FS = Field Strength in dBµV/m RR = RA - AG - AV in dBµV LF = CF + AF in dB Assume a receiver reading of 52.0 dBµV is obtained. The antenna factor of 7.4 dB and cable factor of 1.6 dB are added. The amplifier gain of 29 dB and average factor of 5 dB are subtracted, giving a field strength of 27 dBµV/m. This value in dBµV/m was converted to its corresponding level in µV/m. RA = 52.0 dBµV/m AF = 7.4 dB RR = 18.0 dBµV CF = 1.6 dB LF = 9.0 dB AG = 29.0 dB AV = 5.0 dB FS = RR + LF FS = 18 + 9 = 27 dBµV/m Level in µV/m = Common Antilogarithm [(27 dBµV/m)/20] = 22.4 µV/m Report No.: HK11061730-1 FCC ID: NMTAD162 4

INTERTEK TESTING SERVICES 3.2 Radiated Emission Configuration Photograph The worst case in radiated emission was found at 2480.000 MHz For electronic filing, the worst case radiated emission configuration photographs are saved with filename: radiated photos.pdf. 3.3 Radiated Emission Data The data on the following page lists the significant emission frequencies, the limit and the margin of compliance. Numbers with a minus sign are below the limit. Judgment: Passed by 0.2 dB 3.4 Conducted Emission Configuration Photograph The worst case in line-conducted emission was found at 0.155 MHz For electronic filing, the worst case line-conducted configuration photographs are saved with filename: conducted photo.pdf. 3.5 Conducted Emission Data For electronic filing, the graph and data table of conducted emission is saved with filename: conducted.pdf. Judgment: Pass by 8.26 dB Report No.: HK11061730-1 FCC ID: NMTAD162 5

INTERTEK TESTING SERVICES Applicant: IDT Technology Limited Date of Test: July 12, 2011 Model: AD162 Worst-Case Operating Mode: Transmitting Table 1 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Channel 00 Pre-Amp Antenna Net at Average Calculated Average Limit Polari- Frequency Reading Gain Factor 3m - Peak Factor at 3m at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dB) (dBμV/m) (dBμV/m) (dB) V 2403.000 97.2 33 29.4 93.6 0 93.6 94.0 -0.4 V 4806.000 51.6 33 34.9 53.5 0 53.5 54.0 -0.5 V 7209.000 41.6 33 37.9 46.5 0 46.5 54.0 -7.5 V 9612.000 45.1 33 40.4 52.5 0 52.5 54.0 -1.5 V 12015.000 44.9 33 40.5 52.4 0 52.4 54.0 -1.6 V 14418.000 46.1 33 40.0 53.1 0 53.1 54.0 -0.9 Pre-Amp Antenna Net at Peak Limit Polari- Frequency Reading Gain Factor 3m - Peak at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2403.000 97.2 33 29.4 93.6 114.0 -20.4 V 4806.000 51.6 33 34.9 53.5 74.0 -20.5 V 7209.000 41.6 33 37.9 46.5 74.0 -27.5 V 9612.000 45.1 33 40.4 52.5 74.0 -21.5 V 12015.000 44.9 33 40.5 52.4 74.0 -21.6 V 14418.000 46.1 33 40.0 53.1 74.0 -20.9 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. Report No.: HK11061730-1 FCC ID: NMTAD162 6

INTERTEK TESTING SERVICES Applicant: IDT Technology Limited Date of Test: July 12, 2011 Model: AD162 Worst-Case Operating Mode: Transmitting Table 2 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Channel 38 Pre-Amp Antenna Net at Average Calculated Average Limit Polari- Frequency Reading Gain Factor 3m - Peak Factor at 3m at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dB) (dBμV/m) (dBμV/m) (dB) V 2440.000 97.3 33 29.4 93.7 0 93.7 94.0 -0.3 V 4880.000 49.7 33 34.9 51.6 0 51.6 54.0 -2.4 V 7320.000 43.8 33 37.9 48.7 0 48.7 54.0 -5.3 V 9760.000 43.5 33 40.4 50.9 0 50.9 54.0 -3.1 V 12200.000 45.5 33 40.5 53.0 0 53.0 54.0 -1.0 V 14640.000 48.0 33 38.4 53.4 0 53.4 54.0 -0.6 Pre-Amp Antenna Net at Peak Limit Polari- Frequency Reading Gain Factor 3m - Peak at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2440.000 97.3 33 29.4 93.7 114.0 -20.3 V 4880.000 49.7 33 34.9 51.6 74.0 -22.4 V 7320.000 43.8 33 37.9 48.7 74.0 -25.3 V 9760.000 43.5 33 40.4 50.9 74.0 -23.1 V 12200.000 45.5 33 40.5 53.0 74.0 -21.0 V 14640.000 48.0 33 38.4 53.4 74.0 -20.6 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. Report No.: HK11061730-1 FCC ID: NMTAD162 7

INTERTEK TESTING SERVICES Applicant: IDT Technology Limited Date of Test: July 12, 2011 Model: AD162 Worst-Case Operating Mode: Transmitting Table 3 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Channel 77 Pre-Amp Antenna Net at Average Calculated Average Limit Polari- Frequency Reading Gain Factor 3m - Peak Factor at 3m at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dB) (dBμV/m) (dBμV/m) (dB) V 2480.000 97.4 33 29.4 93.8 0 93.8 94.0 -0.2 V 4960.000 48.9 33 34.9 50.8 0 50.8 54.0 -3.2 V 7440.000 47.6 33 37.9 52.5 0 52.5 54.0 -1.5 V 9920.000 44.2 33 40.4 51.6 0 51.6 54.0 -2.4 V 12400.000 45.3 33 40.5 52.8 0 52.8 54.0 -1.2 V 14880.000 48.1 33 38.4 53.5 0 53.5 54.0 -0.5 Pre-Amp Antenna Net at Peak Limit Polari- Frequency Reading Gain Factor 3m - Peak at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2480.000 97.4 33 29.4 93.8 114.0 -20.2 V 4960.000 48.9 33 34.9 50.8 74.0 -23.2 V 7440.000 47.6 33 37.9 52.5 74.0 -21.5 V 9920.000 44.2 33 40.4 51.6 74.0 -22.4 V 12400.000 45.3 33 40.5 52.8 74.0 -21.2 V 14880.000 48.1 33 38.4 53.5 74.0 -20.5 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. Report No.: HK11061730-1 FCC ID: NMTAD162 8

INTERTEK TESTING SERVICES 4.0 Equipment Photographs For electronic filing, the photographs are saved with filename: external photos.pdf and internal photos.pdf. 5.0 Product Labelling For electronics filing, the FCC ID label artwork and the label location are saved with filename: label.pdf. 6.0 Technical Specifications For electronic filing, the block diagram and schematic of the tested EUT are saved with filename: block.pdf and circuit.pdf respectively. 7.0 Instruction Manual For electronic filing, a preliminary copy of the Instruction Manual is saved with filename: manual.pdf. This manual will be provided to the end-user with each unit sold/leased in the United States. 8.0 Miscellaneous Information The miscellaneous information includes details of the test procedure and measured bandedge. Report No.: HK11061730-1 FCC ID: NMTAD162 9

INTERTEK TESTING SERVICES 8.1 Measured Bandwidth From the following plots, they show that the fundamental emissions are confined in the specified band (2400MHz to 2483.5MHz). In case of the fundamental emissions are within two standard bandwidths from the bandedge, the delta measurement technique is used for determining bandedge compliance. Standard bandwidth is the bandwidth specified by ANSI C63.4 (2003) for frequency being measured. Emissions radiated outside of the specified frequency bands, except harmonics, are attenuated by 50dB below the level of the fundamental or to the general radiated emissions limits in Section 15.209, whichever is the lesser attenuation, which meet the requirement of part 15.249(d). Peak Measurement Bandedge compliance is determined by applying marker-detla method, i.e. (Bandedge plot). Lower bandedge: Peak Resultant field strength = Fundamental emissions (peak value) – delta from the plot; =93.60dBμV/m – 41.65dB = 51.95dBμV/m Upper bandedge: Peak Resultant field strength = Fundamental emissions (peak value) – delta from the plot; =93.80dBμV/m – 42.17dB =51.63dBμV/m The resultant field strength meets the general radiated emission limit in section 15.209, which does not exceed 74dBµV/m (Peak Limit) and 54dBµV/m (Average Limit). Report No.: HK11061730-1 FCC ID: NMTAD162 10

INTERTEK TESTING SERVICES 8.2 Discussion Pulse Desensitivity Pulse desensitivity is not applicable for this device. Since the transmitter transmits the RF signal continuously. 8.3 Calculation of Average Factor The average factor is not applicable for this device as the transmitted signal is a continuously signal. 8.4 Emissions Test Procedures The following is a description of the test procedure used by Intertek Testing Services Hong Kong Ltd. in the measurements of transmitter operating under the Part 15, Subpart C rules. The test set-up and procedures described below are designed to meet the requirements of ANSI C63.4 - 2003. A typical or an unmodulated CW signal at the operating frequency of the EUT has been supplied to the EUT for all measurements. Such a signal is supplied by a signal generator and an antenna in close proximity to the EUT. The signal level is sufficient to stabilize the local oscillator of the EUT. The transmitting equipment under test (EUT) is placed on a wooden turntable which is four feet in diameter and approximately one meter in height above the ground plane. During the radiated emissions test, the turntable is rotated and any cables leaving the EUT are manipulated to find the configuration resulting in maximum emissions. The EUT is adjusted through all three orthogonal axis to obtain maximum emission levels. The antenna height and polarization are also varied during the testing to search for maximum signal levels. The height of the antenna is varied from one to four meters. Detector function for radiated emissions is in peak mode. Average readings, when required, are taken by measuring the duty cycle of the equipment under test and subtracting the corresponding amount in dB from the measured peak readings. A detailed description for the calculation of the average factor can be found in Exhibit 8.3. The frequency range scanned is from the lowest radio frequency signal generated in the device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or 40 GHz, whichever is lower. For line conducted emissions, the range scanned is 150 kHz to 30 MHz. Report No.: HK11061730-1 FCC ID: NMTAD162 11

INTERTEK TESTING SERVICES 8.4 Emissions Test Procedures (cont’d) The EUT is warmed up for 15 minutes prior to the test. AC power to the unit is varied from 85% to 115% nominal and variation in the fundamental emission field strength is recorded. If battery powered, a new, fully charged battery is used. Conducted measurements were made as described in ANSI C63.4 - 2003. The IF bandwidth used for measurement of radiated signal strength was 100 kHz or greater when frequency is below 1000 MHz. Where pulsed transmissions of short enough pulse duration warrant, a greater bandwidth is selected according to the recommendations of Hewlett Packard Application Note 150-2. A discussion of whether pulse desensitivity is applicable to this unit is included in this report (See Exhibit 8.1). Above 1000 MHz, a resolution bandwidth of 1 MHz is used. Transmitter measurements are normally conducted at a measurement distance of three meters. However, to assure low enough noise floor in the forbidden bands and above 1 GHz, signals are acquired at a distance of one meter or less. All measurements are extrapolated to three meters using inverse scaling, unless otherwise reported. Measurements taken at a closer distance are so marked. 9.0 Equipment List 1) Radiated Emissions Test Equipment EMI Test Receiver Biconical Antenna Log Periodic Antenna Registration No. EW-2500 EW-0954 EW-0446 Manufacturer R&S EMCO EMCO Model No. ESCI 3104C 3146 Calibration Date Jan. 25, 2011 Apr. 14, 2010 Apr. 26, 2010 Calibration Due Date Jan. 25, 2012 Oct. 14, 2011 Oct. 26, 2011 Equipment Spectrum Analyzer Double Ridged Guide Antenna Registration No. EW-2188 EW-1015 Manufacturer AGILENTTECH EMCO Model No. E4407B 3115 Calibration Date Dec. 27, 2010 Feb. 09, 2010 Calibration Due Date Dec. 31, 2011 Aug. 09, 2011 2) Bandedge Measurement Equipment Spectrum Analyzer Registration No. EW-2249 Manufacturer R&S Model No. FSP30 Calibration Date Oct. 22, 2010 Calibration Due Date Oct. 22, 2011 Report No.: HK11061730-1 FCC ID: NMTAD162 12


Document Created: 2011-08-12 16:19:16
Document Modified: 2011-08-12 16:19:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC