SAR Test Plot 1

FCC ID: NM8TND

RF Exposure Info

Download: PDF
FCCID_562896

Date/Time: 7/7/2005 5:10:47 PMDate/Time: 7/7/2005 5:16:43 PM Test Laboratory: Compliance Certification Services Left Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.92 mho/m; İr = 41; ȡ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Touch - M-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.538 mW/g Touch - M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 18.8 V/m; Power Drift = -0.052 dB Peak SAR (extrapolated) = 0.610 W/kg SAR(1 g) = 0.483 mW/g; SAR(10 g) = 0.355 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.548 mW/g

Date/Time: 7/7/2005 5:29:36 PMDate/Time: 7/7/2005 5:35:48 PMDate/Time: 7/7/2005 5:42:01 PM Test Laboratory: Compliance Certification Services Left Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.92 mho/m; İr = 41; ȡ = 1000 kg/m3 Phantom section: Left Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt - M-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.253 mW/g Tilt - M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 17.5 V/m; Power Drift = -0.036 dB Peak SAR (extrapolated) = 0.340 W/kg SAR(1 g) = 0.227 mW/g; SAR(10 g) = 0.160 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.276 mW/g Tilt - M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 17.5 V/m; Power Drift = -0.036 dB Peak SAR (extrapolated) = 0.300 W/kg SAR(1 g) = 0.233 mW/g; SAR(10 g) = 0.172 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.261 mW/g

Date/Time: 7/7/2005 6:51:40 PMDate/Time: 7/7/2005 6:57:59 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 824.2 MHz; ı = 0.908 mho/m; İr = 41.1; ȡ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Touch - L-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.668 mW/g Touch - L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 20.2 V/m; Power Drift = -0.010 dB Peak SAR (extrapolated) = 0.759 W/kg SAR(1 g) = 0.590 mW/g; SAR(10 g) = 0.430 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.674 mW/g

Date/Time: 7/15/2005 6:08:43 PMDate/Time: 7/15/2005 6:14:47 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.902 mho/m; εr = 40.7; ρ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GSM + WiFi_Touch - L-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.596 mW/g GSM + WiFi_Touch - L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 18.7 V/m; Power Drift = -0.026 dB Peak SAR (extrapolated) = 0.685 W/kg SAR(1 g) = 0.520 mW/g; SAR(10 g) = 0.377 mW/g Info: Interpolated medium parameters used for SAR evaluation!

Date/Time: 7/7/2005 7:04:27 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:8 Touch - L-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.524 mW/g

Date/Time: 7/7/2005 6:12:03 PMDate/Time: 7/7/2005 6:18:19 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.92 mho/m; İr = 41; ȡ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Touch - M-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.569 mW/g Touch - M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 18.3 V/m; Power Drift = -0.062 dB Peak SAR (extrapolated) = 0.646 W/kg SAR(1 g) = 0.500 mW/g; SAR(10 g) = 0.365 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.570 mW/g

Date/Time: 7/7/2005 7:06:29 PMDate/Time: 7/7/2005 7:12:47 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 848.8 MHz; ı = 0.931 mho/m; İr = 40.8; ȡ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Touch - H-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.515 mW/g Touch - H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 17.1 V/m; Power Drift = -0.017 dB Peak SAR (extrapolated) = 0.581 W/kg SAR(1 g) = 0.457 mW/g; SAR(10 g) = 0.333 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.518 mW/g

Date/Time: 7/7/2005 6:28:08 PMDate/Time: 7/7/2005 6:34:25 PMDate/Time: 7/7/2005 6:40:37 PM Test Laboratory: Compliance Certification Services Right Hand Side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.92 mho/m; İr = 41; ȡ = 1000 kg/m3 Phantom section: Right Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilt - M-ch/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.294 mW/g Tilt - M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.5 V/m; Power Drift = -0.113 dB Peak SAR (extrapolated) = 0.392 W/kg SAR(1 g) = 0.251 mW/g; SAR(10 g) = 0.172 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.306 mW/g Tilt - M-ch/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.5 V/m; Power Drift = -0.113 dB Peak SAR (extrapolated) = 0.327 W/kg SAR(1 g) = 0.247 mW/g; SAR(10 g) = 0.180 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.284 mW/g

Date/Time: 7/7/2005 10:43:04 AMDate/Time: 7/7/2005 10:50:43 AM Test Laboratory: Compliance Certification Services GSM Body worn Front DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.150 mW/g M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 10.7 V/m; Power Drift = -0.029 dB Peak SAR (extrapolated) = 0.189 W/kg SAR(1 g) = 0.137 mW/g; SAR(10 g) = 0.097 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.157 mW/g

Date/Time: 7/7/2005 4:11:38 PMDate/Time: 7/7/2005 4:18:47 PM Test Laboratory: Compliance Certification Services Body worn Front side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GPRS M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.532 mW/g GPRS M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 22.1 V/m; Power Drift = -0.135 dB Peak SAR (extrapolated) = 0.688 W/kg SAR(1 g) = 0.499 mW/g; SAR(10 g) = 0.355 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.574 mW/g

Date/Time: 7/7/2005 6:06:12 PMDate/Time: 7/7/2005 6:13:24 PM Test Laboratory: Compliance Certification Services Body worn Front side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 EGPRS M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.167 mW/g EGPRS M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 12.0 V/m; Power Drift = -0.046 dB Peak SAR (extrapolated) = 0.205 W/kg SAR(1 g) = 0.150 mW/g; SAR(10 g) = 0.109 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.174 mW/g

Date/Time: 7/7/2005 11:36:52 AMDate/Time: 7/7/2005 11:43:58 AM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 824.2 MHz; ı = 0.981 mho/m; İr = 56.1; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GSM L-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.547 mW/g GSM L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 22.8 V/m; Power Drift = -0.070 dB Peak SAR (extrapolated) = 0.700 W/kg SAR(1 g) = 0.508 mW/g; SAR(10 g) = 0.367 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.595 mW/g

Date/Time: 7/7/2005 11:16:21 AMDate/Time: 7/7/2005 11:23:30 AM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GSM M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.532 mW/g GSM M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 22.3 V/m; Power Drift = -0.040 dB Peak SAR (extrapolated) = 0.683 W/kg SAR(1 g) = 0.496 mW/g; SAR(10 g) = 0.357 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.579 mW/g 0 dB = 0.579mW/g

Date/Time: 7/7/2005 11:56:30 AMDate/Time: 7/7/2005 12:03:43 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 848.8 MHz; ı = 1.01 mho/m; İr = 55.9; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GSM H-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.559 mW/g GSM H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 22.5 V/m; Power Drift = -0.043 dB Peak SAR (extrapolated) = 0.719 W/kg SAR(1 g) = 0.514 mW/g; SAR(10 g) = 0.368 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.607 mW/g

Date/Time: 7/7/2005 12:20:26 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8 GSM H-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.436 mW/g

Date/Time: 7/7/2005 5:22:44 PMDate/Time: 7/7/2005 5:30:03 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 824.2 MHz; ı = 0.981 mho/m; İr = 56.1; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GPRS L-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.00 mW/g GPRS L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 31.6 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.30 W/kg SAR(1 g) = 0.938 mW/g; SAR(10 g) = 0.675 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.10 mW/g

Date/Time: 7/7/2005 5:00:40 PMDate/Time: 7/7/2005 5:08:00 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GPRS M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.987 mW/g GPRS M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 31.2 V/m; Power Drift = -0.108 dB Peak SAR (extrapolated) = 1.29 W/kg SAR(1 g) = 0.915 mW/g; SAR(10 g) = 0.656 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.08 mW/g

Date/Time: 7/7/2005 5:38:35 PMDate/Time: 7/7/2005 5:45:49 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 848.8 MHz; ı = 1.01 mho/m; İr = 55.9; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GPRS H-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.00 mW/g GPRS H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 30.9 V/m; Power Drift = -0.062 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 0.941 mW/g; SAR(10 g) = 0.670 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.11 mW/g

Date/Time: 7/15/2005 7:22:43 PMDate/Time: 7/15/2005 7:29:26 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.987 mho/m; εr = 54.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GPRS + WiFi_H-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.987 mW/g GPRS + WiFi_H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 31.0 V/m; Power Drift = -0.105 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.930 mW/g; SAR(10 g) = 0.663 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 1.09 mW/g

Date/Time: 7/7/2005 5:52:07 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:4 GPRS H-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.782 mW/g

Date/Time: 7/7/2005 6:41:49 PMDate/Time: 7/7/2005 6:49:01 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 824.2 MHz; ı = 0.981 mho/m; İr = 56.1; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 EGPRS L-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.300 mW/g EGPRS L-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.9 V/m; Power Drift = -0.019 dB Peak SAR (extrapolated) = 0.368 W/kg SAR(1 g) = 0.272 mW/g; SAR(10 g) = 0.197 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.314 mW/g

Date/Time: 7/7/2005 6:24:18 PMDate/Time: 7/7/2005 6:31:28 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 836.6 MHz; ı = 0.993 mho/m; İr = 56; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 EGPRS M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.282 mW/g EGPRS M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.6 V/m; Power Drift = -0.001 dB Peak SAR (extrapolated) = 0.368 W/kg SAR(1 g) = 0.269 mW/g; SAR(10 g) = 0.194 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.314 mW/g

Date/Time: 7/7/2005 6:58:39 PMDate/Time: 7/7/2005 7:05:54 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 848.8 MHz; ı = 1.01 mho/m; İr = 55.9; ȡ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24 deg. C; Liquid Temperature: 23 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 EGPRS H-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.298 mW/g EGPRS H-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 16.8 V/m; Power Drift = -0.024 dB Peak SAR (extrapolated) = 0.382 W/kg SAR(1 g) = 0.278 mW/g; SAR(10 g) = 0.199 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.326 mW/g

Date/Time: 7/7/2005 7:12:12 PM Test Laboratory: Compliance Certification Services Body worn Back side DUT: High Tech Computer Corp; Type: ST22A; Serial: N/A Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:4 EGPRS H-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.235 mW/g


Document Created: 2005-07-15 20:07:41
Document Modified: 2005-07-15 20:07:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC