Test Report

FCC ID: NM8PJ53100

Test Report

Download: PDF
FCCID_1657888

VARIANT FCC TEST REPORT (15.407) REPORT NO.: RF111221C21A-1 MODEL NO.: PJ53100 FCC ID: NM8PJ53100 RECEIVED: Feb. 01, 2012 TESTED: Feb. 10 ~ Feb. 11, 2012 ISSUED: Feb. 22, 2012 APPLICANT: HTC Corporation ADDRESS: 23, Xinghua Rd., Taoyuan 330, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 19 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF111221C21A-1 1 Report Format Version 4.2.0 Reference No.: 120201C03

TABLE OF CONTENTS RELEASE CONTROL RECORD .......................................................................................... 3 1. CERTIFICATION....................................................................................................... 4 2. SUMMARY OF TEST RESULTS .............................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 5 3. GENERAL INFORMATION ....................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 6 3.2 DESCRIPTION OF TEST MODES ........................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................... 9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................... 9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 10 4. TEST TYPES AND RESULTS .................................................................................11 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT..................................11 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...............11 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ...........11 4.1.3 TEST INSTRUMENTS ........................................................................................... 12 4.1.4 TEST PROCEDURES ............................................................................................ 13 4.1.5 DEVIATION FROM TEST STANDARD .................................................................. 13 4.1.6 TEST SETUP ......................................................................................................... 14 4.1.7 EUT OPERATING CONDITION ............................................................................. 14 4.1.8 TEST RESULTS ..................................................................................................... 15 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 17 6. INFORMATION ON THE TESTING LABORATORIES ........................................... 18 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ..................................................................................... 19 Report No.: RF111221C21A-1 2 Report Format Version 4.2.0 Reference No.: 120201C03

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A Feb. 22, 2012 Report No.: RF111221C21A-1 3 Report Format Version 4.2.0 Reference No.: 120201C03

1. CERTIFICATION PRODUCT: Smartphone MODEL: PJ53100 BRAND: HTC APPLICANT: HTC Corporation TESTED: Feb. 10 ~ Feb. 11, 2012 TEST SAMPLE: Production Unit STANDARDS: FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2009 This report is issued as a supplementary report of RF111221C21-1. This report shall be used combined together with its original report. PREPARED BY : , DATE: Feb. 22, 2012 Pettie Chen / Specialist APPROVED BY : , DATE: Feb. 22, 2012 Gary Chang / Technical Manager NOTE: The radiated emission test was performed for the addendum. Refer to original report for the other test data. Report No.: RF111221C21A-1 4 Report Format Version 4.2.0 Reference No.: 120201C03

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC PART 15, SUBPART E (SECTION 15.407) STANDARD TEST TYPE AND LIMIT RESULT REMARK SECTION AC Power Conducted 15.407(b)(5) NA Refer to Note Emission Electric Field Strength Meet the requirement of limit. 15.407(b/1/2/3) Spurious Emissions, PASS Minimum passing margin is (b)(5) 30MHz ~ 40000MHz -1.9dB at 82.40MHz. 15.407(a/1/2/3) Peak Transmit Power NA Refer to Note 15.407(a)(6) Peak Power Excursion NA Refer to Note 15.407(a/1/2/3) Peak Power Spectral Density NA Refer to Note 15.407(g) Frequency Stability NA Refer to Note 15.203 Antenna Requirement NA Refer to Note NOTE: The radiated emission test was performed for the addendum. Refer to original report for the other test data. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY 30MHz ~ 200MHz 3.34 dB 200MHz ~1000MHz 3.35 dB Radiated emissions 1GHz ~ 18GHz 2.26 dB 18GHz ~ 40GHz 1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. Report No.: RF111221C21A-1 5 Report Format Version 4.2.0 Reference No.: 120201C03

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Smartphone MODEL NO. PJ53100 FCC ID NM8PJ53100 5.0Vdc (adapter or host equipment) POWER SUPPLY 3.7Vdc or 3.8Vdc (Li-ion battery) MODULATION TYPE 64QAM, 16QAM, QPSK, BPSK MODULATION TECHNOLOGY OFDM 802.11a: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps TRANSFER RATE 802.11n: up to 150.0Mbps OPERATING FREQUENCY 5180 ~ 5320MHz & 5500 ~ 5700MHz 5180 ~ 5320MHz: 8 for 802.11a, 802.11n (20MHz) 5150 ~ 5350MHz: 4 for 802.11n (40MHz) NUMBER OF CHANNEL 5500 ~ 5700MHz: 8 for 802.11a, 802.11n (20MHz) 5150 ~ 5350MHz: 3 for 802.11n (40MHz) 21.28mW for 5180 ~ 5240MHz OUTPUT POWER 20.70mW for 5260 ~ 5320MHz 21.09mW for 5500 ~ 5700MHz ANTENNA TYPE PIFA antenna with -2dBi gain ANTENNA CONNECTOR NA DATA CABLE Refer to Note as below I/O PORTS Refer to user’s manual ACCESSORY DEVICES Refer to Note as below NOTE: 1. This report is prepared for FCC class II permissive change. This report is issued as a supplementary report of BV ADT report no.: RF111221C21-1.The differences compared with original report is adding an inductive cover. Therefore, we re-tested radiated emission test and presented in the test report. 2. The frequency bands used in this EUT are listed as follows: Frequency Band (MHz) 2412~2462 5180~5320 5500~5700 5745~5825 802.11b √ - - - 802.11g √ - - - 802.11a - √ √ √ 802.11n (20MHz) √ √ √ √ 802.11n (40MHz) - √ √ √ 3. The EUT provides one completed transmitter and one receiver. MODULATION MODE TX FUNCTION 802.11b 1TX 802.11g 1TX 802.11a 1TX 802.11n (20MHz) 1TX 802.11n (40MHz) 1TX Report No.: RF111221C21A-1 6 Report Format Version 4.2.0 Reference No.: 120201C03

4. The EUT’s accessories list refers to Ext Pho_ NM8PJ53100.pdf. *Main sample+ item 1, 2, 6, 7, 8, 9, 10 were the worst for the final test. 5. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. 3.2 DESCRIPTION OF TEST MODES FOR 5180 ~ 5320MHz 8 channels are provided for 802.11a, 802.11n (20MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 36 5180 MHz 52 5260 MHz 40 5200 MHz 56 5280 MHz 44 5220 MHz 60 5300 MHz 48 5240 MHz 64 5320 MHz 4 channels are provided for 802.11n (40MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 38 5190 MHz 54 5270 MHz 46 5230 MHz 62 5310 MHz FOR 5500 ~ 5700MHz 8 channels are provided for 802.11a, 802.11n (20MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 100 5500 MHz 116 5580 MHz 104 5520 MHz 132 5660 MHz 108 5540 MHz 136 5680 MHz 112 5560 MHz 140 5700 MHz 3 channels are provided for 802.11n (40MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 102 5510 MHz 134 5670 MHz 110 5550 MHz Report No.: RF111221C21A-1 7 Report Format Version 4.2.0 Reference No.: 120201C03

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE≥1G RE<1G - √ √ - Where RE≥1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz RADIATED EMISSION TEST (ABOVE 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11n (20MHz) 100 to 140 100 OFDM BPSK 7.2 RADIATED EMISSION TEST (BELOW 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11n (20MHz) 100 to 140 100 OFDM BPSK 7.2 TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER (SYSTEM) TESTED BY RE≥1G 25deg. C, 68%RH 120Vac, 60Hz Aska Huang RE<1G 25deg. C, 68%RH 120Vac, 60Hz Aska Huang Report No.: RF111221C21A-1 8 Report Format Version 4.2.0 Reference No.: 120201C03

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 EARPHONE Merry RE C200 NA NA 2 Inductive Cradle Energizer IC2B NA NA NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 1m shielded cable without core 2 NA NOTE: 1. All power cords of the above support units are non shielded (1.8m). 2. Item 1, 2 were provided by client. NO 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST Inductive Cradle EUT (Power from Inductive Cradle) *Test Table Earphone Report No.: RF111221C21A-1 9 Report Format Version 4.2.0 Reference No.: 120201C03

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart E (15.407) ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF111221C21A-1 10 Report Format Version 4.2.0 Reference No.: 120201C03

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table: FREQUENCIES FIELD STRENGTH MEASUREMENT DISTANCE (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS EQUIVALENT FIELD STRENGTH EIRP LIMIT (dBm) FREQUENCIES (MHz) AT 3m (dBµV/m) *NOTE 3 PK PK 5150 ~ 5350 -27 68.3 5470 ~ 5725 -27 68.3 NOTE: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF111221C21A-1 11 Report Format Version 4.2.0 Reference No.: 120201C03

4.1.3 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESIB7 100212 Aug. 02, 2011 Aug. 01, 2012 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Jul. 21, 2011 Jul. 20, 2012 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-160 Apr. 13, 2011 Apr. 12, 2012 SCHWARZBECK HORN Antenna 9120D 209 Aug. 25, 2011 Aug. 24, 2012 SCHWARZBECK HORN Antenna BBHA 9170 148 Jul. 20, 2011 Jul. 19, 2012 SCHWARZBECK Preamplifier 8447D 2944A10633 Oct. 29, 2011 Oct. 28, 2012 Agilent Preamplifier 8449B 3008A01964 Oct. 29, 2011 Oct. 28, 2012 Agilent RF signal cable SUCOFLEX 104 250723/4 Aug. 30, 2011 Aug. 29, 2012 HUBER+SUHNNER RF signal cable 12738/6+309224/ SUCOFLEX 106 Aug. 30, 2011 Aug. 29, 2012 HUBER+SUHNNER 4 Software ADT_Radiated_ NA NA NA ADT. V7.6.15.9.2 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller CO2000 017303 NA NA inn-co GmbH Turn Table TT100 TT93021703 NA NA ADT. Turn Table Controller SC100 SC93021703 NA NA ADT. 26GHz ~ 40GHz Amplifier EM26400 815221 Oct. 29, 2011 Oct. 28, 2012 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 988962. 5. The IC Site Registration No. is IC 7450F-3. Report No.: RF111221C21A-1 12 Report Format Version 4.2.0 Reference No.: 120201C03

4.1.4 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.5 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF111221C21A-1 13 Report Format Version 4.2.0 Reference No.: 120201C03

4.1.6 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.7 EUT OPERATING CONDITION a. Placed the EUT on a testing table. b. Use the software to control the EUT under transmission condition continuously at specific channel frequency. Report No.: RF111221C21A-1 14 Report Format Version 4.2.0 Reference No.: 120201C03

4.1.8 TEST RESULTS ABOVE 1GHz WORST-CASE DATA: 802.11n(20MHz) EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 100 FREQUENCY RANGE 1 ~ 40GHz INPUT POWER DETECTOR Peak (PK) 120Vac, 60 Hz (SYSTEM) FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 68%RH TESTED BY Aska Huang CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 5460.00 44.8 PK 74.0 -29.2 1.00 H 15 6.50 38.30 2 5460.00 34.1 AV 54.0 -19.9 1.00 H 15 -4.20 38.30 3 #5470.00 48.4 PK 68.3 -19.9 1.00 H 15 10.10 38.30 4 *5500.00 95.5 PK 1.00 H 15 57.10 38.40 5 *5500.00 85.3 AV 1.00 H 15 46.90 38.40 6 11000.00 58.2 PK 74.0 -15.8 1.00 H 126 7.90 50.30 7 11000.00 45.3 AV 54.0 -8.7 1.00 H 126 -5.00 50.30 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 5460.00 48.1 PK 74.0 -25.9 1.00 V 46 9.80 38.30 2 5460.00 34.2 AV 54.0 -19.8 1.00 V 46 -4.10 38.30 3 #5470.00 46.7 PK 68.3 -21.6 1.00 V 46 8.40 38.30 4 *5500.00 94.2 PK 1.00 V 46 55.80 38.40 5 *5500.00 84.4 AV 1.00 V 46 46.00 38.40 6 11000.00 57.8 PK 74.0 -16.2 1.00 V 10 7.50 50.30 7 11000.00 46.2 AV 54.0 -7.8 1.00 V 10 -4.10 50.30 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “: Fundamental frequency. 6. "#":The radiated frequency is out the restricted band. Report No.: RF111221C21A-1 15 Report Format Version 4.2.0 Reference No.: 120201C03

BELOW 1GHz WORST-CASE DATA：802.11n (20MHz) EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 100 FREQUENCY RANGE Below 1000MHz INPUT POWER DETECTOR 120Vac, 60 Hz Quasi-Peak (SYSTEM) FUNCTION ENVIRONMENTAL 25deg. C, 68%RH TESTED BY Aska Huang CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 82.40 38.1 QP 40.0 -1.9 1.95 H 325 28.50 9.60 2 181.55 28.5 QP 43.5 -15.0 2.00 H 88 16.00 12.50 3 309.88 25.1 QP 46.0 -20.9 1.00 H 103 9.80 15.30 4 360.43 24.4 QP 46.0 -21.6 1.00 H 208 7.80 16.60 5 461.53 22.4 QP 46.0 -23.6 2.00 H 229 3.30 19.10 6 564.58 23.2 QP 46.0 -22.8 1.50 H 208 1.80 21.40 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.00 35.0 QP 40.0 -5.0 1.00 V 10 22.60 12.40 2 82.40 35.4 QP 40.0 -4.6 2.00 V 205 25.80 9.60 3 136.84 28.9 QP 43.5 -14.6 1.25 V 313 15.50 13.40 4 173.78 20.6 QP 43.5 -22.9 2.00 V 28 7.30 13.30 5 241.83 21.0 QP 46.0 -25.0 1.50 V 154 8.30 12.70 6 375.98 19.0 QP 46.0 -27.0 1.25 V 178 2.00 17.00 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF111221C21A-1 16 Report Format Version 4.2.0 Reference No.: 120201C03

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF111221C21A-1 17 Report Format Version 4.2.0 Reference No.: 120201C03

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation and authorization certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5.phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service.adt@tw.bureauveritas.com Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF111221C21A-1 18 Report Format Version 4.2.0 Reference No.: 120201C03

7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF111221C21A-1 19 Report Format Version 4.2.0 Reference No.: 120201C03


Document Created: 2012-03-12 15:57:51
Document Modified: 2012-03-12 15:57:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC