SAR WWAN Appendix A

FCC ID: NM8PG41200

RF Exposure Info

Download: PDF
FCCID_1480523

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/26 System Check_Body_835MHz_110426 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_110426 Medium parameters used: f = 835 MHz; σ = 0.985 mho/m; εr = 54.5; ρ = 1000 kg/m3 Ambient Temperature：22.4 ℃; Liquid Temperature：21.4 ℃ DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(6.12, 6.12, 6.12); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2011/1/13 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.70 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.5 V/m; Power Drift = -0.033 dB Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 2.49 mW/g; SAR(10 g) = 1.65 mW/g Maximum value of SAR (measured) = 2.70 mW/g 0 dB = 2.70mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/28 System Check_Body_835MHz_110428 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_110428 Medium parameters used: f = 835 MHz; σ = 0.986 mho/m; εr = 54.6; ρ = 1000 kg/m3 Ambient Temperature：22.4 ℃; Liquid Temperature：21.4 ℃ DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(6.12, 6.12, 6.12); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2011/1/13 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.65 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.8 V/m; Power Drift = -0.010 dB Peak SAR (extrapolated) = 3.45 W/kg SAR(1 g) = 2.44 mW/g; SAR(10 g) = 1.62 mW/g Maximum value of SAR (measured) = 2.65 mW/g 0 dB = 2.65mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/30 System Check_Body_835MHz_110430 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_110430 Medium parameters used: f = 835 MHz; σ = 0.996 mho/m; εr = 55.4; ρ = 1000 kg/m3 Ambient Temperature：22.3 ℃; Liquid Temperature：21.5 ℃ DASY5 Configuration: - Probe: ET3DV6 - SN1787; ConvF(6.12, 6.12, 6.12); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2010/10/22 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.73 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.5 V/m; Power Drift = -0.025 dB Peak SAR (extrapolated) = 3.57 W/kg SAR(1 g) = 2.53 mW/g; SAR(10 g) = 1.68 mW/g Maximum value of SAR (measured) = 2.74 mW/g

0 dB = 2.74mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/2/25 System Check_Body_1900MHz_110225 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900_110225 Medium parameters used: f = 1900 MHz; σ = 1.54 mho/m; εr = 53.9; ρ = 1000 kg/m3 Ambient Temperature：22.5 ℃; Liquid Temperature：21.4 ℃ DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.39, 4.39, 4.39); Calibrated: 2010/9/21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2011/1/13 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 12.9 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.2 V/m; Power Drift = 0.00357 dB Peak SAR (extrapolated) = 16.6 W/kg SAR(1 g) = 10.7 mW/g; SAR(10 g) = 5.8 mW/g Maximum value of SAR (measured) = 12.3 mW/g

0 dB = 12.3mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/26 System Check_Body_1900MHz_110426 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900_110426 Medium parameters used: f = 1900 MHz; σ = 1.53 mho/m; εr = 52.9; ρ = 1000 kg/m3 Ambient Temperature：22.6 ℃; Liquid Temperature：21.4 ℃ DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.47, 4.47, 4.47); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2011/1/13 - Phantom: SAM-Right; Type: QD 000 P40 C; Serial: TP-1383 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 11.9 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.8 V/m; Power Drift = 0.008 dB Peak SAR (extrapolated) = 15.3 W/kg SAR(1 g) = 9.76 mW/g; SAR(10 g) = 5.27 mW/g Maximum value of SAR (measured) = 11.2 mW/g 0 dB = 11.2mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/29 System Check_Body_1900MHz_110429 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900_110429 Medium parameters used: f = 1900 MHz; σ = 1.53 mho/m; εr = 52.3; ρ = 1000 kg/m3 Ambient Temperature：22.2 ℃; Liquid Temperature：21.2 ℃ DASY4 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.39, 4.39, 4.39); Calibrated: 2010/9/21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2011/1/13 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 12.5 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.2 V/m; Power Drift = 0.081 dB Peak SAR (extrapolated) = 15.9 W/kg SAR(1 g) = 10.3 mW/g; SAR(10 g) = 5.59 mW/g Maximum value of SAR (measured) = 11.8 mW/g 0 dB = 11.8mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/30 System Check_Body_1900MHz_110430 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900_110430 Medium parameters used: f = 1900 MHz; σ = 1.56 mho/m; εr = 52; ρ = 1000 kg/m3 Ambient Temperature：22.4 ℃; Liquid Temperature：21.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3731; ConvF(7.13, 7.13, 7.13); Calibrated: 2010/9/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2010/10/22 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 11.4 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 82.6 V/m; Power Drift = -0.103 dB Peak SAR (extrapolated) = 17.3 W/kg SAR(1 g) = 9.71 mW/g; SAR(10 g) = 5.32 mW/g Maximum value of SAR (measured) = 10.8 mW/g

0 dB = 10.8mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/4/30 System Check_Body_2600MHz_110430 DUT: Dipole 2600 MHz Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: MSL_2600_110430 Medium parameters used: f = 2600 MHz; σ = 2.2 mho/m; εr = 53.8; ρ = 1000 kg/m3 Ambient Temperature：22.7 ℃; Liquid Temperature：21.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3731; ConvF(6.85, 6.85, 6.85); Calibrated: 2010/9/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2010/10/22 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Pin=250mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 16.4 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 85.7 V/m; Power Drift = -0.019 dB Peak SAR (extrapolated) = 31.2 W/kg SAR(1 g) = 13.9 mW/g; SAR(10 g) = 5.98 mW/g Maximum value of SAR (measured) = 16.1 mW/g

0 dB = 16.1mW/g


Document Created: 2011-05-17 20:07:59
Document Modified: 2011-05-17 20:07:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC