LTE MPR Statement

FCC ID: NM8PG09410

Cover Letter(s)

Download: PDF
FCCID_1501244

Gem_Shang HTC Corporation 6—3, Baoquang‘ Rd., Xindian City, Taipei County, Taiwan Tel: 886—2—89124138 ; Fax: 886—2—89126307 Date: June 21, 2011 SUBJECT: FCC Application for FCC ID: NMSPGO9410 To Whom It May Concern: We, HTC Corporation, hereby declare to the LTE device that the MPR settings are implemented configured into firmware and cannot be disabled by the end user or LTE carrier network for all channels, bandwidths, and modulations as below rule of table. The MPR are within 3GPP tolerance, and the device cannot transmit higher power than the Tune up procedures. Modulation Channel bandwidth / Transmission sCPP , bandwidth configuration [RB] MPR (dB) mor 5 10 Target (dB) MHz MHz QPSK >8 > 12 1 s1 16 QAM <8 <12 1 s1 16 QAM >8 > 12 2 <2 The A—MPR was disabled during SAR testing via system simulator. For SAR compliance, the output power is reduced when user is close to the Rear Face and the Top Edge (In Secondary Landscape position), 5dB reduction for Band 4, and 10B _ reduction for Band 17. MPR applied to different RB configurations are disabled here. Sincerely yours, Alex Gau / Project Manager Tel: 886—2—89124138 Mail: alex_gau@htc.com


Document Created: 2011-07-07 18:46:11
Document Modified: 2011-07-07 18:46:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC