CRN 88817 SAR Calibration Files

FCC ID: NM8PC36100

RF Exposure Info

Download: PDF
FCCID_1322124

FCC SAR Test Report Report No. : FA050618 Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. SPORTON INTERNATIONAL INC. Page Number : C1 of C1 TEL : 886-3-327-3456 Report Issued Date : Jul. 07, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : NM8PC36100

Calibration Laboratory of «on Schweizerischer Kalibrierdienst Schmid & Partner inz Service suisse d‘étalonnage Engineering AG i;'am//% $ Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4* rmN§ lf\\ \® Swiss Calibration Service Witake Accredited bythe Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates cien Sporton‘(Auden) Certificate No: D2600V2—1008_Sep09 [CALIBRATION CERTIFICATE Object D2600V2 — SN: 1008 Calibration procedure(s) QA CAL—05.v7 Calibration procedure for dipole validation kits Calibration date September 24, 2009 Condition of the calibrated item .n Tolerance This callbration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certiicate All calibrations have bean conducted in the closed laboratory facilty: environment temperature (22 3)°C and humidity < 70% Calibration Equipment used (M&TE critical for calibration) Primary Standards iD # Cal Date (Callbrated by. Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 08—Oct—08 (No. 217—00898) Oct—08 Power sensor HP 8481A Uss7202783 08—Oct—08 (No. 217—00898) Oct—08 Reference 20 dB Attenuator SN: 5086 (209) 31—Mar—09 (No. 217—01025) Mar—10 Type—N mismatch combination SN: 5047.2 / 06327 31—Mar—09 (No. 217—01029) Mar—10 Reference Probe ESSDV3 SN: 3205 26—Jun—08 (No. ES3—8205_Jun09) Jun—10 DAE4 SN: 601 07—Mar—09 (No. DAE4—601 Mar09) Mar—10 Secondary Standards ip # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house chack Oct—07) In house chack: Oct—09 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—07) In house chack: Oct—09 Network AnalyzorHP 8753E Uss7890585 S4206 18—Oct—01 (in house chack Oct—08) In house chack: Oct—09 Name Function Signature Calibrated by: Claudio Leubler Laboratory Technician O" fl/\ Approved by: Katia Pokovic Technical Manager [3z 32 é _V_ issued: September24, 2009 This calibration certficate shall not be reproduced except in full without written approval of the laboratory Certificate No: D2600V2—1008_Sep09 Page 1 of 9

srontow cas. Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognitionof calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "EEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)®, February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET}, "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Retum Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D2600V2—1008_SepO3 Page 2 of 9

Measurement Conditions DASY system confiquration, as far as not iven on page 1. DASY Version DASYS V5.0 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center— TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2600 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.0 1.96 mho/m Measured Head TSL parameters (22.0 £0.2) °C 39.8 2 6 % 1.91 mho/m £ 6 % Head TSL temperature during test (22.0 £0.2) °C «_ wlz SAR result with Head TSL SAR averaged aver 1 cm* (1 g) of Head TSL condition SAR measured 250 mW input power 14.4 mW / g SAR normalized normalized to 1W 57.6 mW / g SAR for nominal Head TSL parametars ‘ normalized to 1W 58.5 mW / g = 17.0 % (k=2) SAR averaged over 10 cm* {10 g) of Head TSL condition SAR measured 250 mW input power 6.52 mW /g SAR normalized normalized to 1W 26.1 mW /g SAR for nominal Head TSL parametars ‘ normalized to 1W 26.3 mW / g * 16.5 % (k=2) ‘ Correction to nominal TSL parameters according to d), chapter "SAR Sensitivities" Certificate No: D2600V2—1008_§ep09 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.5 2.16 mho/m Measured Body TSL parameters (22.0 0.2) °C 52.9 26 % 2.14 mhoim £ 6 % Body TSL temperature during test (@1.8 £0.2) °C <— 00— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL condition SAR measured 250 mW input power 14.4 mW / q SAR normalized normalized to 1W §57.6 mW / q SAR for nominal Body TSL parameters * normalized to 1W 57.9 mW / g # 17.0 % (k=2) SAR averaged over 10 cm* {10 g) of Body TSL condition SAR measured 250 mW input power 6.40 mW / g SAR normalized normalized to 1W 25.6 mW /g SAR for nominal Body TSL parameters ° normalized to 1W 25.7 mW / g # 16.5 % (k=2) * Carrection to nominal TSL parameters according to d), chapter "SAR Sensitivities" Certificate No: D2600V2—1008_Sepd9 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 49.1 0 — 3.6 jQ Return Loss —28.5 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 45.1 Q — 0.6 jQ Return Loss —25.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.156 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connactions near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 23, 2006 Certificate No: D26OOV2—1008_Sep09 Page 5 of 9

srontow cas. DASY5 Validation Report for Head TSL Date/Time: 23.09.2009 12:50:48 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN1008 Communication System: CW—2600; Frequency: 2600 MHz; Duty Cycle: 1: 1 Medium: HSL U11 BB Medium parameters used: f = 2600 MHz; 0 = 1.91 mho/m; &, = 39.8; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC) DASYS Configuration: * Probe: ES3DV3 — SN3205; ConvF(4.47, 4.47, 4.47); Calibrated: 26.06.2009 * Sensor—Surface; 3mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601: Calibrated: 07.03.2009 * Phantom: Flat Phantom 5.0 (front): Type: QDOOOPSOAA; Serial: 1001 * Mcasurement SW: DASY5, V5.0 Build 120; SEMCAD X Version 13.4 Build 45 Pin = 250 mW; d = 10 mm/Zoom Scan (7x7x7)/Cube 0: Measurementgrid: dx=5mm, dy=Smm, dz=5mm Reference Value = 102.8 V/m; Power Drift = 0.041 dB Peak SAR (extrapolated) = 30.1 W/kg SAR(I g) = 14.4 mW/g; SAR(1O g) = 6.52 mW/g Maximumvalue of SAR (measured) = 18.6 mW/g 0 dB = 18.6mW/g Certificate No: D2600V2—1008_$ep09 Page 6 of 9

Impedance Measurement Plot for Head TSL 23 Sep 2009 es:37:13 i% s 6 pF 1/ dy y ( 1 we si L B/REF —20 aB 0.000 ea0hkz to ~ , 1 fvg N\ 1 tor re0.00e ca0 M# Certificate No: D2600V2—1008_SepO9 Page 7 of 9

seonton cas. DASY5 Validation Report for Body TSL Date/Time: 24.09.2009 14:36:24 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN1008 Communication System: CW—2600; Frequency: 2600 MHz; Duty Cycle: 1:1 Medium: MSL U1O BB Medium parameters used: f = 2600 MHz; 0 = 2.14 mho/m; &; = 52.9; p = 1000 kg/m? Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC) DASYS Configuration: * Probe: ES3DV3 — SN3205; ConvF(4.18, 4.18, 4.18); Calibrated: 26.06.2009 * Sensor—Surface; 3mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 07.03.2009 * Phantom: Flat Phantom 5.0 (back); Type: QDOUOP50AA; Serial: 1002 * Mcasurement SW: DASY5, ¥5.0 Build 120; SEMCAD X Version 13.4 Build 45 Pin = 250 mW; d = 10 mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=Smm, dy=Smm, dz=5mm Reference Value = 95.7 V/m; Power Drift = 0.00855 dB Peak SAR (extrapolated) = 31.5 W/kg SAR(I g) = 14.4 mW/g; SAR(10 g) = 6.4 mW/g Maximum value of SAR (measured) = 18.5 mW/g 944 442 18.9 <23.6 0 dB = 18.5mW/g Certificate No: D2600V2—1008_Sep03 Page 8 of 9

Impedance Measurement Plot for Body TSL 24 Sep 2009 pF cH2 si1 L06 5 dB/REF —20 db r92 d8 2 £00.000 000 MHz C 7 2 4 — Y 1 Certificate No: D2600V2—1008_Sep09 Page 9 of 9

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizlo svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accroditation Service is one of the signatories to the EA Multilateral Agroement for the recognition of callbration certificates Client Sporton (Auden) Certificate No: DAE3—577_Aug09 CALIBRATION CERTIFICATE Object DAE3 — SD 000 DO3 AA — SN: 577 Calibration procedure(s) QA CAL—06.v20 Calibration procedure for the data acquisition electronics (DAE) Calibration date: August 24, 2009 Condition of the calibrated item In Tolerance This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabiity are given on the following pages and are part of the certiicate. All callbrations have been conducted in the closed laboratory faciity: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for callbration) Primary Standards D# Gal Date (Certficate No.) Scheduled Galibration Keithiey Muitimeter Type 2001 SN: 0810278 30—Sep—08 (No: 7670) Sep—09 Secondary Standards iD# Check Date (in house) Scheduled Check Calibrator Box V1.1 SE UMS 006 AB 1004 05—Jun—09 (in house check) In house check: Jun—10 Name Function Signature / Calibrated by: Andrea Guntl Technician Approved by: Fin Bomholt R&D Director % 'V'\P&]CL LQAtak Issued: August 24, 2009 This calibration certificate shall not be reproduced except in full without writen approval of the laboratory. Certificate No: DAE3—577_Aug09 Page 1 of 5

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service sulsse d‘étalonnage Engineering AG Servizlo svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Callbration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of callbration certificates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters «_ DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrumenttraceable to national standards. The figure given corresponds to the full scale rangeof the voltmeterin the respective range. * Connector angle: The angle of the connectoris assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. * The following parameters as documented in the Appendix contain technical information as a result from the performance test and require no uncertainty. * DC Voltage Measurement Linearity: Verification of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltageis included in this measurement. «_ Common mode sensitivity: Influence of a positive or negative common mode voltage on the differential measurement. «_ Channel separation: Influence of a voltage on the neighbor channels not subject to an input voltage. * AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage * Input Offset Measurement: Output voltage and statistical results over a large number of zero voltage measurements. ® Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. * Input resistance: DAE input resistance at the connector, during internal auto—zeroing and during measurement. * Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. «_ Power consumption: Typical value for information. Supply currents in various operating modes. Certificate No: DAE3—577_Aug09 Page 2 of 5

sronrom cam. .. . _ DC Voltage Measurement AID — Converter Resolution nominal High Range: 1LSB = 6AuV , full range = —100...+300 mV Low Range: 1LSB = 61nV , full range = ~1...... +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors is ¥ Z High Range 404.338 + 0.1% (k=2) 403.798 + 0.1% (k=2) 404.230 £0.1% (k=2) Low Range 3.93524 £ 0.7% (k=2) 3.93795 + 0.7% (k=2) 3.96031 £0.7% (k=2) Connector Angle Connector Angle to be used in DASY system 256.5°41° Certificate No: DAE3—577_Augo9 Page 3 of 5

Appendix 1. DC Voltage Linearity High Range Reading (uV) Difference (uV) Error (%) Channel X + Input 200007.8 —2.29 —0.00 Channel X + Input 20001.53 143 0.01 Channel X — Input ~19993.95 5.05 —0.03 Channel Y + Input 200007.4 1.77 —0.00 Channel Y + Input 19998.29 —1.61 —0.01 Channel Y — Input —20001.65 —2.65 0.01 Channel Z + Input 200006.2 —2.31 —0.00 Channel Z + Input 20001.48 1.58 0.01 Channel Z — Input —20000.84 0.01 0.01 Low Range Reading (uV) Difference (V) Error (%) Channel X + Input 1999.2 —0.90 —0.05 Channel X + Input 199.29 —0.81 —0.41 Channel X — Input 201.77 —1.87 0.94 Channel Y + Input 2001.2 1.28 0.06 Channel Y + Input 198.17 41.73 —0.86 Channel Y — Input —201.74 144 0.72 Channel Z + Input 1999.6 —0.38 —0.02 Channel Z + Input 198.12 —1.98 —0.99 Channel Z — Input —202.47 —2.47 1.24 2. Common mode sensitivity DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Common mode High Range Low Range Input Voltage (mV) Average Reading (1V) Average Reading (uV) Channel X 200 15.91 14.34 —200 1242 ~13.97 Channel Y 200 —6.64 —6.80 —200 6.69 6.07 Channel Z 200 ~1.25 —1.39 —200 —0.26 —0.28 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input Voltage (mV) Channel X (uV) Channel Y (uV) Channel Z (uV) Channel X 200 — 1.37 0.39 Channel Y 200 1.76 — 3.65 Channel Z 200 2.33 —0.06 + Certificate No: DAE3—577_Aug09 Page 4 of 5

4. AD—Converter Values with inputs shorted DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec High Range (LSB) Low Range (LSB) Channel X 15967 16106 Channel Y 15858 15635 Channel Z 16203 16176 5. Input Offset Measurement DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input 10M€ Average (uV) min. Offset (wV) max. Offset (uV) Sid. l():‘\;;atmn Channel X —0.02 —3.72 1.06 0.66 Channel Y 0.20 112 1.38 0.41 Channel Z 1.34 —2.07 —0.36 0.34 6. Input Offset Current Nominal Input circuitry offset current on all channels: <25fA 7. Input Resistance Zeroing (MOhm) Measuring (MOhm) Channel X 0.1999 200.9 Channel Y 0,2000 201.5 Channel Z 0.1999 200.9 8. Low Battery Alarm Voltage (verified during pre test) Typical values Alarm Level (VDC) Supply (+ Vec) +7.9 Supply (— Vee) —7.6 9. Power Consumption (verified during pre test) Typical values Switched off (mA) Stand by (mA) Transmitting (mA) Supply (+ Vec) +0.0 +6 +14 Supply (— Vee) —0.01 —8 —9 Certificate No: DAE3—577_Augo9 Page 5 of 5

Calibration Laboratory of Schweizorischer Kalibrierdienst Schmid & Partner Service suisse c‘étalonnage Engineering AG Servizio svizzero di taratura Zoughausstrasse 43, 8004 Zurich, Switzeriand Swiss Calibration Service Accredited by the Swiss Accreditation Service (GAG) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilatoral Agroement for the recognition of calibration certificates Client Sporton (Auden) Cortificate No: EX3—3514_Jan10 CALIBRATION CERTIFICATE Object EX3DV3 — SN:3514 Calibration procedure(s) QA CAL—O1.v6, QA CAL—14.v3, QA CAL—23.v3 and QA CAL—25.v2 Calibration procedure for dosimetric E—field probes Calibration date: January 26, 2010 This calibration certiicate documents the traceabity to national standards, which realize the physical units of measurements (S1) The measurements and the uncertainties with confidence probablity are given on the following pages and are part of the cortificate All calibrations have been conducted in the closed laboratory faciity: environment temperature (22 + 3)°C and humidity < 70% Callbration Equipment used (M&TE critical for calloration) Primary Standards CB Cal Date (Certifcate No ) eduled Calibration Power mater E44198 cBetzosere 1—Apr.09 (No. 217—01030) pr—10 Power sensor E4412A Mvateoser? 1—Apr—08 (No. 217—01030) Power sensor E4412A NMva1498087 1—Apr.08 (No. 217—01030) Reference 3 d8 Attenuator sN ss084o) 31—Mar—09 (No. 217—01026) Reference 20 48 Attenuator SN: $5086 (20b) 31—Mar—09 (No. 217—01028) Reference 30 48 Attenuator SN: sotze (cob) 31—Mar—09 (No. 217—01027) Reference Probe ES3DV2 sN 3013 30—De0—03 (No. ES3—3013_Dec09) DAF4 SN: seo 29—Sep—09 (No. DAE4—660_Sep02) Secondary Standards |1n# Check Date (in house) ScheduledCheck RF generator HP 8648C ‘ Ussea2u01700 4—Aug—99 (in house check Oct—08) in house check Oct—11 Network Analyzer HP 8753E US37300585 18—0ct—01 (n house check Oct—09) In house check: Oct10 Function Signature Calibrated by Technical Manager mz Approved by R&D Director 75 7tex] P‘%_ Issued: January 26, 2010 This calibration certficate shall not be reproduced except in full without written approval of the laboratory. Certiicate No: EX3—3514_Jan10 Page 1 of 11

Calibration Laboratory of G SchweizerischerKalibrierdienst Schmid & Partner Service suisse d‘italonnage Engineering AG C\ sevicesvererewrtmeurs Zeughausstrasse 43, 8004 Zurich, Switzertand S swiss Caltbration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMxy,z sensitivity in free space ConvF sensitivity in TSL / NORMxy,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C modulation dependent linearization parameters Polarization ip » rotation around probe axis Polarization 0 9 rotation around an axis that is in the plane normal to probe axis (at measurement center), = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 Methods Applied and Interpretation of Parameters: NORMx,y,z: Assessed for E—field polarization 9 = 0 (f s 900 MHz in TEM—cell; f > 1800 MHz: R22 wavegulae) NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx.y,z does not effect the E*—field uncertainty inside TSL (see below ConvF). * NORM(Mx.y,z = NORMx.y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. * DCPxy,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * Axsy.zi Bxy,z; C6y.z, VRay,z: A, B, C are numerical linearization parameters assessed based on thedata of power sweep for specific modulation signal. The parameters do not dapend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation(alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. * Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3514_Jan10 Page 2 of 11

srontow cas. EX3DV3 SN:3514 January 26, 2010 Probe EX3DV3 SN:3514 Manufactured: December 15, 2002 Last calibrated: January 21, 2009 Repaired: January 20, 2010 Recalibrated: January 26, 2010 Calibrated for DASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3614_Jan10 Page 3 of 11

EX3DV3 SN:3514 January 26, 2010 DASY — Parameters of Probe: EX3DV3 SN:3514 Basic Calibration Parameters Sensor X Sensor Y Sensor 2 lUnc (k=2) Norm (uV/(V/im)")> 0.64 0.70 0.59 £10.1% DCP (my)" 96.7 96.2 94.9 Modulation Calibration Parameters uiD Communication System Name PAR A B C VR Une® aB dBuV mV (k=2) 10000 ow o.00| x 0.00 0.00 100| 300 £15% v 0.00 0.00 1.00| 300 2 0.00 0.00 1.00| 300 ‘The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95% * The uncertainties of NormX,¥.2 do not affect the E—feld uncertainty inside TSL (see Pages 5 and 6) * Numenical Ineanzation parameter: uncertainty not required * Uncertainty is determines using the maximum deviation from linear response applying recatangular distribution and is expressed for the square of the feld value Certificate No: EX3—3614_Jan10 Page 4 of 11

EX3DV3 SN:3514 January 26, 2010 DASY — Parameters of Probe: EX3DV3 SN:3514 Calibration Parameter Determined in Head Tissue Simulating Media f pmkz) Validity [MHz]® Permittivity Conductivity ConvF X_ConyF Y ConyFZ Alpha ___Depth Une (k=2) 835 £ 50 /x 100 41.5 £ 5% 0.90 £ 5% 9.78 9.78 9.78 0.59 087 £11.0% 1900 + 50/x 100 40.0 4 5% 140 2 5% 826 8.26 8.26 0.57 064 211.0% 2300 + 50 /+ 100 39.5 4 5% 1.67 4 5% 785 7.85 7.85 0.45 0.69 £11.0% 2600 + 50 /x 100 39.0 £ 5% 1.96 2 5% 745 745 745 0.20 118 £11.0% 3500 + 50 /+ 100 37.9 4 5% 2.91 + 6% 7.06 7.06 7.06 0.33 114 £131% 5200 £ 50 /x 100 36.0 + 5% 4.66 + 5% 4.87 4.87 4.87 0.45 1.70 £131% 5300 + 50 /x 100 35.9 £ 5% 4.76 2 5% 4.57 4.57 4.57 0.45 1.70 #18.1% 5500 + 50 /x 100 35.6 £ 5% 4.96 + 5% 4.48 4.48 4.48 0.50 1.70 £13.1% 5600 + 50 /x 100 35.5 £ 5% 5.07 + 5% 433 4.33 4.33 0.50 1.70 £13.1% 5800 +650 /+ 100 35.3 « 5% 5.27 # 5% 423 4.23 423 0.50 1170 £131% 5 The valiily of + 100 MHz only apoliesfor DASY vé 4 and higher (see Page 2). The unoortainty is the RSS of the Canv?: uncertainty at callbration frequency and the uncertainty for the incleated frequency band Certifiate No: EX3—3514_Jan10 Page 5 of 11

EX3DV3 SN:3514 January 26, 2010 DASY — Parameters of Probe: EX3DV3 SN:3514 Calibration Parameter Determined in Body Tissue Simulating Media [MHz] Validity [MHz]° Permittivity Conductivity ConvF X ConvF¥Y ConvF Z Alpha Dopth Unc (k=2) 835 50 /2 100 55.2 2 5% 0.97 £ 5% a 75 a75 8.75 0.38 0.80 £11.0% 1900 +50 /+ 100 53.3 4 5% 1.52 4 5% 8.01 8.01 8.01 0.50 0.70 +11.0% 2300 +50 /2 100 52.8 + 5% 1.85 4 5% 780 7.80 7.80 0.25 1.08 £11.0% 2600 + 50 /2 100 52.5 4 5% 216 £ 5% 754 754 754 0.28 1.03 £11.0% 3500 + 50 /2 100 51.3 + 5% 8.31 + 5% 846 845 845 0.33 127 £13.14% 5200 £50 /2 100 49.0 £ 5% 5.30 + 5% 427 427 427 0.50 175 £13.1% 5300 £ 50 /2 100 48.5 2 5% 5.42 + 5% 411 411 411 0.52 175 £13.14% 5500 +50 /2 100 48.6 2 5% 5.65 + 5% 286 385 a8s 055 1.75 £13.1% 5600 £50 /2 100 48.5 2 5% 5.77 4 5% 366 366 a6e css 175 +131% 5600 +50 /+ 100 48.2 4 5% 6.00 £ 5% 3.90 3.90 3.90 a.s0 175 £131% ° The valiity of £ 100 Miz only apples for DASY vi 4 and higher (see Page 2). The uncertainty is the RES ofthe ConvF uncertainty at calloraton frequency and the uncertainty for the incicates requency band. Certificate No: EX3—3514_Jan10 Page 6 of 11

srontow cas. EX3DV3 SN:3514 January 26, 2010 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Frequency response (normalized) 0.6 0.5 0 500 1000 1500 2000 2500 3000 f paiz] —>—TEM —e—Ree Uncertainty of Frequency Response of E—field: + 6.3%(k=2) Certificate No: EX3—3514_Jan10 Page 7 of 11

EX3DV3 SN:3514 January 26, 2010 Receiving Pattern (¢), 3 = 0° 1=600 MHz, TEM if110EXX f= 1800 MHz, WG R22 —@—X —@—y —@—2 —O—Tat —o—X% —@—y —@—2 —O0—Tot 1.0 o8 06 —‘04 —6—30 MHz T°°MM gor) | | —m— 100 is x ‘§_02 ——600 Mz 04 —®—1800 Nz | as —t—2500 Mz <8 10 0 so 120 180 240 s00 $01 Uncertainty of Axial Isotropy Assessment: + 0.5% (k=2) Certificate No: EX3—3514_Jan10 Page 8 of 11

srontaw LaB. L clllll 0 ccll uns o on enco cce en on ce > EX3DV3 SN:3514 January 26, 2010 Dynamic Range f(SARpeaq) (Waveguide R22, f= 1800 MHz) 1.E+08 Exo4 Input Signal [4V) E+03 E+02 1.E+01 1.2+00 0.0001 0.001 0.01 01 1 10 100 SAR [mW/cm] —#—not compensated —4—compensated o t : 0 0|o 0 0 00 om 0.001 0.01 0.1 1 SAR (mWicm ) Uncertainty of Linearity Assessment: 2 0.6% (k=2) Certificate No: EX3—3514_Jan10 Page 9 of 11

srontow cas. EX3DV3 SN:3514 January 26, 2010 Conversion Factor Assessment 1= 835 MHz, WGLS R9 (head) f = 1900 MHz, WGLS R22 (head) 40 300 35 250 30 225 §** 4 520 §150 21 = FE:' * £100 < 1.0 5 "os 3 so 00 00 0 10 2o so. 40 so so 0 10 20 so 40 2tmm] zmm ~@~—Analytical —0—Measuremonts —@—Analytical —6—Measurements Deviation from Isotropy in HSL Error (§, 3), f = 900 MHz Error [dB] m—100—080 m980—060 ©—980—040 ©040—020 ©—020000 monooze mozeo«o 040060 ©060.0%0 ©oso1.00 Uncertainty of Spherical Isotropy Assessment: + 2.6% (k=2) Certificate No: EX3—3514_Jan10 Page 10 of 11

EX3DV3 SN:3514 January 26, 2010 Other Probe Parameters ‘Sensor Arrangement Triangular] Connector Angle (*) Not applicable Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 2 mm Certifcate No: EX3—3514_Jan10 Page 11 of 11


Document Created: 2010-08-04 13:47:55
Document Modified: 2010-08-04 13:47:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC