User Manual

FCC ID: NM82PYV100

Users Manual

Download: PDF
FCCID_3265234

Tracker user guide

What’s inside the box About Vive Tracker English You’ll find the following items: Attach the Vive Tracker to a compatible third-party English accessory so that it can be detected and used within the Vive VR system. 1 Vive Tracker 3 Dongle cradle 2 Dongle 4 USB cable 1 Sensors 5 Standard camera mount 2 USB port 6 Stabilizing pin recess 3 Pogo pin connector 7 Status light Important: Always ensure that the play area is entirely clear of all objects, obstacles and other individuals when using Vive Tracker on any object intended to be moved 4 Friction pad 8 Power button while wearing the Vive headset. 2 3

Charging Vive Tracker Attaching Vive Tracker to an accessory English Make sure to use the USB cable that’s in the box. Connect Standard tripod docking: Align the tripod plate’s bolt English the USB cable to the power adapter that came with your and stabilizing pin with the corresponding holes on Vive Vive controllers, and then plug the power adapter to a Tracker. Turn the tab on the bottom side of the plate power outlet to charge Vive Tracker. clockwise to screw Vive Tracker securely in place. Note: You can also connect Vive Tracker to a computer’s USB port to charge it. Stabilizing pin 1/4 inch bolt When Vive Tracker is fully charged, its status light either shows white if it is off or green if it is turned on. Note: For illustration purposes only. Third-party accessories are purchased separately. 4 5

Turning Vive Tracker on or off English Side tightening wheel: Tighten the spinning wheel • To turn Vive Tracker on, press the Power button. English until Vive Tracker is securely fixed in place. The Pogo pin • To turn Vive Tracker off, press the Power button for 5 supports electrical connection for the attached accessory. seconds. Note: When you exit the SteamVR app on your computer, Vive Tracker will also automatically turn off. Pogo pin pad (optional) Spinning wheel Note: For illustration purposes only. Third-party accessories are purchased separately. 6 7

Using the dongle Pairing Vive Tracker English If you’re using two controllers along with Vive Tracker, you • Once Vive Tracker is turned on for the first time, it will English need to connect the dongle to enable hardware tracking. automatically pair with the headset or dongle. Connect one end of the supplied USB cable to the dongle The status light shows as blinking blue while the pairing cradle, and then attach the dongle to the cradle. Connect is in progress. The status light turns solid green when the other end of the USB cable to your computer. Vive Tracker is successfully paired. Note: Keep the dongle at least 45 cm (18 in) away from the • To manually pair Vive Tracker, launch the SteamVR app, computer and place it where it won’t be moved. tap , and then select Devices > Pair Tracker. Follow the on-screen instructions to complete the 45 cm (18 in) process. Dongle Dongle cradle USB cable 8 9

Verifying the connection status Updating the Vive Tracker firmware English From your computer, open the SteamVR app. Check if the Warning: Do not unplug the USB cable any time before English icon for Vive Tracker shows as , which means Vive the firmware update is complete. Doing so could result in a Tracker is detected successfully. firmware error. 1. From your computer, open the SteamVR app. Checking the status light 2. If you see the icon, mouse over it to check if the firmware is out of date. If so, click Update firmware. The status light shows: 3. Using the supplied USB cable, connect the Vive Tracker • Green when Vive Tracker is in normal mode to one of your computer’s USB ports. • Blinking red when battery is low 4. Once the tracker is detected by the SteamVR app, the • Blinking blue when Vive Tracker is pairing with the firmware update will start automatically. headset or dongle 5. When the update is complete, click Done. • Blue when Vive Tracker is connecting with the headset or dongle 10 11

Resetting Vive Tracker English If you are having general issues with Vive Tracker, you can reset the hardware. Connect Vive Tracker to your computer using the supplied USB cable, and then press and hold the Power button for 10 seconds. Troubleshooting Vive Tracker If Vive Tracker is not detected, try the following methods to troubleshoot the issue: • Make sure that Vive Tracker is placed inside the play area. • Turn Vive Tracker off and on again to reactivate the tracking. © 2017 HTC Corporation. All rights reserved. • Restart the SteamVR app. If you still get an error, reboot Vive, the Vive logo, HTC and the HTC logo are trademarks of HTC Corporation. your computer and reopen the SteamVR app. Steam, the Steam logo and SteamVR are trademarks and/or registered trademarks of Valve Corporation in the U.S. and/or other countries. www.vive.com 91H0xxxx-xxM Rev.A 12


Document Created: 2016-12-28 17:33:50
Document Modified: 2016-12-28 17:33:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC