SAR Report (appendix A)

FCC ID: NM80P8B100

RF Exposure Info

Download: PDF
FCCID_2319714

FCC SAR Test Report Appendix A. SAR Plots of System Verification The plots for system verification with largest deviation for each SAR system combination are shown as follows. Report Format Version 5.0.0 Issued Date : Apr. 22, 2014 Report No. : SA140303C07

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/04 System Check_H750_140404 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H750_0404 Medium parameters used: f = 750 MHz; σ = 0.892 S/m; εr = 41.542; ρ = 1000 kg/m3 Ambient Temperature：21.8 ℃; Liquid Temperature：21.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.89, 10.89, 10.89); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.62 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.151 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 3.16 W/kg SAR(1 g) = 2.14 W/kg; SAR(10 g) = 1.42 W/kg Maximum value of SAR (measured) = 2.70 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/03/25 System Check_H835_140325 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H835_0325 Medium parameters used: f = 835 MHz; σ = 0.92 S/m; εr = 41.594; ρ = 1000 kg/m3 Ambient Temperature：21.5℃; Liquid Temperature：21.2℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.52, 10.52, 10.52); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.06 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 58.435 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 3.62 W/kg SAR(1 g) = 2.39 W/kg; SAR(10 g) = 1.56 W/kg Maximum value of SAR (measured) = 3.05 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/04 System Check_H1750_140404 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H1750_0404 Medium parameters used: f = 1750 MHz; σ = 1.378 S/m; εr = 40.018; ρ = 1000 kg/m3 Ambient Temperature：21.9 ℃; Liquid Temperature：21.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(8.92, 8.92, 8.92); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Front; Type: QD000P40CD; Serial: TP 1654 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.7 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.646 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 15.6 W/kg SAR(1 g) = 8.56 W/kg; SAR(10 g) = 4.52 W/kg Maximum value of SAR (measured) = 12.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/03/29 System Check_H1900_140329 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d022 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H1900_0329 Medium parameters used: f = 1900 MHz; σ = 1.41 S/m; εr = 38.986; ρ = 1000 kg/m3 Ambient Temperature：21.2℃; Liquid Temperature：20.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3864; ConvF(8.2, 8.2, 8.2); Calibrated: 2013/07/31; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2013/07/26 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.3 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 98.273 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 18.0 W/kg SAR(1 g) = 9.38 W/kg; SAR(10 g) = 4.71 W/kg Maximum value of SAR (measured) = 13.8 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/04 System Check_H2450_140404 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 716 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450_0404 Medium parameters used: f = 2450 MHz; σ = 1.867 S/m; εr = 39.077; ρ = 1000 kg/m3 Ambient Temperature：21.6℃; Liquid Temperature：20.9 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3864; ConvF(7.47, 7.47, 7.47); Calibrated: 2013/07/31; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2013/07/26 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.4 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.3 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(1 g) = 13 W/kg; SAR(10 g) = 5.95 W/kg Maximum value of SAR (measured) = 20.3 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/04 System Check_H2600_140404 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1003 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: H2600_0404 Medium parameters used: f = 2600 MHz; σ = 2.049 S/m; εr = 37.739; ρ = 1000 kg/m3 Ambient Temperature：21.6℃; Liquid Temperature：20.9 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3864; ConvF(7.26, 7.26, 7.26); Calibrated: 2013/07/31; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2013/07/26 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.3 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 103.1 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 29.1 W/kg SAR(1 g) = 14.2 W/kg; SAR(10 g) = 6.77 W/kg Maximum value of SAR (measured) = 21.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_H5200_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5200 MHz;Duty Cycle: 1:1.12 Medium: H5G_0408 Medium parameters used: f = 5200 MHz; σ = 4.8 S/m; εr = 35.629; ρ = 1000 kg/m3 Ambient Temperature：21.6 ℃; Liquid Temperature：21.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(5.57, 5.57, 5.57); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 61.252 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 31.8 W/kg SAR(1 g) = 7.68 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 16.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_H5300_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: H5G_0408 Medium parameters used: f = 5300 MHz; σ = 4.92 S/m; εr = 35.436; ρ = 1000 kg/m3 Ambient Temperature：21.6 ℃; Liquid Temperature：21.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(5.33, 5.33, 5.33); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.6 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 62.881 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 35.6 W/kg SAR(1 g) = 8.55 W/kg; SAR(10 g) = 2.41 W/kg Maximum value of SAR (measured) = 17.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_H5600_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: H5G_0408 Medium parameters used: f = 5600 MHz; σ = 5.247 S/m; εr = 34.846; ρ = 1000 kg/m3 Ambient Temperature：21.6 ℃; Liquid Temperature：21.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(4.94, 4.94, 4.94); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 16.9 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 62.363 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 38.5 W/kg SAR(1 g) = 8.49 W/kg; SAR(10 g) = 2.36 W/kg Maximum value of SAR (measured) = 17.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_H5800_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: H5G_0408 Medium parameters used: f = 5800 MHz; σ = 5.46 S/m; εr = 34.549; ρ = 1000 kg/m3 Ambient Temperature：21.6 ℃; Liquid Temperature：21.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(4.89, 4.89, 4.89); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.7 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 59.187 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 36.1 W/kg SAR(1 g) = 7.83 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 16.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/06 System Check_B750_140406 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: B750_0406 Medium parameters used: f = 750 MHz; σ = 0.967 S/m; εr = 55.261; ρ = 1000 kg/m3 Ambient Temperature：21.7 ℃; Liquid Temperature：20.8 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.39, 10.39, 10.39); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Front; Type: QD000P40CD; Serial: TP 1654 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.82 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.774 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 3.33 W/kg SAR(1 g) = 2.29 W/kg; SAR(10 g) = 1.54 W/kg Maximum value of SAR (measured) = 2.86 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/03/31 System Check_B835_140331 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B835_0331 Medium parameters used: f = 835 MHz; σ = 0.972 S/m; εr = 55.124; ρ = 1000 kg/m3 Ambient Temperature：22.2℃; Liquid Temperature：21.6℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.35, 9.35, 9.35); Calibrated: 2013/04/30; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2013/04/24 - Phantom: ELI v4.0_Right; Type: QDOVA001BA; Serial: TP:1043 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.89 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.030 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.43 W/kg SAR(1 g) = 2.26 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 2.87 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/05 System Check_B1750_140405 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: B1750_0405 Medium parameters used: f = 1750 MHz; σ = 1.5 S/m; εr = 52.398; ρ = 1000 kg/m3 Ambient Temperature：21.7 ℃; Liquid Temperature：20.7 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(8.35, 8.35, 8.35); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.9 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 90.049 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 16.0 W/kg SAR(1 g) = 9.14 W/kg; SAR(10 g) = 4.91 W/kg Maximum value of SAR (measured) = 12.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/02 System Check_B1900_140402 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d022 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B1900_0402 Medium parameters used: f = 1900 MHz; σ = 1.565 S/m; εr = 54.581; ρ = 1000 kg/m3 Ambient Temperature：21.7 ℃; Liquid Temperature：20.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(8.11, 8.11, 8.11); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1653 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 14.1 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.967 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 17.9 W/kg SAR(1 g) = 9.77 W/kg; SAR(10 g) = 5 W/kg Maximum value of SAR (measured) = 14.1 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_B2450_140408 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 716 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B2450_0408 Medium parameters used: f = 2450 MHz; σ = 1.972 S/m; εr = 51.262; ρ = 1000 kg/m3 Ambient Temperature：21.8 ℃; Liquid Temperature：20.9 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.72, 7.72, 7.72); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Front; Type: QD000P40CD; Serial: TP 1654 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.3 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.2 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 5.97 W/kg Maximum value of SAR (measured) = 20.5 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/07 System Check_B2600_140407 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1003 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: B2600_0407 Medium parameters used: f = 2600 MHz; σ = 2.216 S/m; εr = 52.309; ρ = 1000 kg/m3 Ambient Temperature：21.8 ℃; Liquid Temperature：20.9 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.49, 7.49, 7.49); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: SAM Phantom_Front; Type: QD000P40CD; Serial: TP 1654 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.3 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.460 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 28.7 W/kg SAR(1 g) = 13 W/kg; SAR(10 g) = 5.74 W/kg Maximum value of SAR (measured) = 20.6 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_B5200_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: B5G_0408 Medium parameters used: f = 5200 MHz; σ = 5.158 S/m; εr = 48.511; ρ = 1000 kg/m3 Ambient Temperature：21.2 ℃; Liquid Temperature：21.0 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(5.16, 5.16, 5.16); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 13.8 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 56.081 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 28.7 W/kg SAR(1 g) = 7.24 W/kg; SAR(10 g) = 2.05 W/kg Maximum value of SAR (measured) = 15.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_B5300_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: B5G_0408 Medium parameters used: f = 5300 MHz; σ = 5.322 S/m; εr = 48.374; ρ = 1000 kg/m3 Ambient Temperature：21.2 ℃; Liquid Temperature：21.0 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(4.92, 4.92, 4.92); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 14.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 57.203 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 30.5 W/kg SAR(1 g) = 7.11 W/kg; SAR(10 g) = 1.97 W/kg Maximum value of SAR (measured) = 15.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_B5600_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B5G_0408 Medium parameters used: f = 5600 MHz; σ = 5.753 S/m; εr = 47.615; ρ = 1000 kg/m3 Ambient Temperature：21.2 ℃; Liquid Temperature：21.0 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(4.62, 4.62, 4.62); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.7 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 59.729 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 29.4 W/kg SAR(1 g) = 7.62 W/kg; SAR(10 g) = 2.16 W/kg Maximum value of SAR (measured) = 15.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2014/04/08 System Check_B5800_140408 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: B5G_0408 Medium parameters used: f = 5800 MHz; σ = 5.952 S/m; εr = 47.421; ρ = 1000 kg/m3 Ambient Temperature：21.2 ℃; Liquid Temperature：21.0 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3590; ConvF(4.74, 4.74, 4.74); Calibrated: 2014/03/04; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2013/09/25 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 13.9 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 54.955 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 30.6 W/kg SAR(1 g) = 6.93 W/kg; SAR(10 g) = 1.95 W/kg Maximum value of SAR (measured) = 14.7 W/kg


Document Created: 2014-04-22 16:32:28
Document Modified: 2014-04-22 16:32:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC