Test Report (DFS)

FCC ID: NM80P8B100

Test Report

Download: PDF
FCCID_2319633

DFS TEST REPORT REPORT NO.: RF130303C07-2 MODEL NO.: 0P8B100 FCC ID: NM80P8B100 RECEIVED: Mar. 03, 2014 TESTED: Apr. 12, 2014 ISSUED: Apr. 14, 2014 APPLICANT: HTC Corporation ADDRESS: 1F, 6-3 Baoqiang Road, Xindian City, Taipei County 231, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF130303C07-2 1 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

TABLE OF CONTENTS RELEASE CONTROL RECORD 3 1. CERTIFICATION 4 2. EUT INFORMATION 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ........................................................5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ..........................................................................5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT .......................................................5 2.4 EUT MAXIMUM CONDUCTED POWER ....................................................................................6 2.5 EUT MAXIMUM E.I.R.P. POWER................................................................................................7 2.6 TRANSMIT POWER CONTROL (TPC) ......................................................................................8 2.7 STATEMENT OF MAUNFACTURER ..........................................................................................8 3. U-NII DFS RULE REQUIREMENTS 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ..................................................................9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ...............................................................10 4. TEST & SUPPORT EQUIPMENT LIST 12 4.1 TEST INSTRUMENTS...............................................................................................................12 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................12 5. TEST PROCEDURE 13 5.1 BV ADT DFS MEASUREMENT SYSTEM .................................................................................13 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL ...................................................14 5.3 DEVIATION FROM TEST STANDARD .....................................................................................15 5.4 RADIATED TEST SETUP CONFIGURATION ...........................................................................15 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .....................................................................15 6. TEST RESULTS 16 6.1 SUMMARY OF TEST RESULTS ...............................................................................................16 6.2 TEST RESULTS ........................................................................................................................17 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE.....17 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME ....................................18 6.2.3 NON-OCCUPANCY PERIOD ....................................................................................................20 6.2.4 NON-ASSOCIATED TEST ........................................................................................................22 6.2.5 NON- CO-CHANNEL TEST .......................................................................................................22 7. PHOTOGRAPHS OF THE TEST CONFIGURATION 23 8. INFORMATION ON THE TESTING LABORATORIES 24 9. APPENDIX A – MODIFIACATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB 25 Report No.: RF130303C07-2 2 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130303C07-2 Original release. Apr. 14, 2014 Report No.: RF130303C07-2 3 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

1. CERTIFICATION PRODUCT: Smartphone MODEL: 0P8B100 BRAND: HTC APPLICANT: HTC Corporation TESTED: Apr. 12, 2014 TEST SAMPLE: Production Unit STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96 The above equipment (model: 0P8B100) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Apr. 14, 2014 Suntee Liu / Specialist APPROVED BY : , DATE : Apr. 14, 2014 Ken Liu / Senior Manager Report No.: RF130303C07-2 4 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

2.EUT INFORMATION 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT TABLE 1: OPERATING FREQUENCY BANDS AND MODE OF EUT OPERATING FREQUENCY RANGE OPERATIONAL MODE 5250~5350MHz 5470~5725MHz Client without radar detection and   ad hoc function Note: The EUT has disabled the 5600-5650MHz band by S/W to avoid 5600-5650MHz. 2.2 EUT SOFTWARE AND FIRMWARE VERSION TABLE 2: THE EUT SOFTWARE/FIRMWARE VERSION NO. PRODUCT MODEL NO. SOFTWARE/FIRMWARE VERSION Kernel Version:3.4.0-gbaf6010 buildteam@u60000-Build-103#1 SMP PREEMPT 1 Smartphone 0P8B100 Baseband Version:0.40.45.0214 PRI Version:0.26_002 Software Number:315022 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT TABLE 3: ANTENNA LIST OPERATION FREQUENCY ANT NO. ANTENNA TYPE MAX. GAIN (dBi) RANGE (MHz) 1 PIFA 5250-5350 MHz -7.2 1 PIFA 5470-5725 MHz -6.9 Report No.: RF130303C07-2 5 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

2.4 EUT MAXIMUM CONDUCTED POWER TABLE 4: THE MEASURED CONDUCTED OUTPUT POWER 802.11a MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 16.33 42.954 1 5470~5725 16.25 42.17 802.11n (20MHz) MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 16.36 43.251 1 5470~5725 16.45 44.157 802.11n (40MHz) MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 13.33 21.528 1 5470~5725 13.17 20.749 Report No.: RF130303C07-2 6 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

2.5 EUT MAXIMUM E.I.R.P. POWER TABLE 5: THE E.I.R.P OUTPUT POWER LIST 802.11a MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 9.13 8.185 1 5470~5725 9.35 8.61 802.11n (20MHz) MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 9.16 8.241 1 5470~5725 9.55 9.016 MAX. POWER ANT NO. FREQUENCY BAND (MHz) OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 5250~5350 6.13 4.102 1 5470~5725 6.27 4.236 Report No.: RF130303C07-2 7 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

2.6 TRANSMIT POWER CONTROL (TPC) U-NII devices operating in the 5.25-5.35 GHz band and the 5.47-5.725 GHz band shall employ a TPC mechanism. The U-NII device is required to have the capability to operate at least 6 dB below the mean EIRP value of 30 dBm. A TPC mechanism is not required for systems with an e.i.r.p. of less than 500 mW. Maximum EIRP of this device is 9.016mW which less than 500mW, therefore it’s not require TPC function. 2.7 STATEMENT OF MAUNFACTURER Manufacturer statement confirming that information regarding the parameters of the detected Radar Waveforms is not available to the end user. And the device doesn’t have Ad Hoc mode on DFS frequency bands. Report No.: RF130303C07-2 8 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

3. U-NII DFS RULE REQUIREMENTS 3.1 WORKING MODES AND REQUIRED TEST ITEMS The manufacturer shall state whether the UUT is capable of operating as a Master and/or a Client. If the UUT is capable of operating in more than one operating mode then each operating mode shall be tested separately. See tables 1 and 2 for the applicability of DFS requirements for each of the operational modes. TABLE 6: APPLICABILITY OF DFS REQUIREMENTS PRIOR TO USE A CHANNEL OPERATIONAL MODE REQUIREMENT CLIENT WITHOUT CLIENT WITH MASTER RADAR RADAR DETECTION DETECTION Non-Occupancy Period  Not required  DFS Detection Threshold  Not required  Channel Availability Check Time  Not required Not required Uniform Spreading  Not required Not required U-NII Detection Bandwidth  Not required  TABLE 7: APPLICABILITY OF DFS REQUIREMENTS DURING NORMAL OPERATION OPERATIONAL MODE REQUIREMENT CLIENT WITHOUT CLIENT WITH MASTER RADAR RADAR DETECTION DETECTION DFS Detection Threshold  Not required  Channel Closing Transmission Time    Channel Move Time    U-NII Detection Bandwidth  Not required  Report No.: RF130303C07-2 9 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS DETECTION THRESHOLD VALUES TABLE 8: DFS DETECTION THRESHOLDS FOR MASTER DEVICES AND CLIENT DEVICES WITH RADAR DETECTION MAXIMUM TRANSMIT POWER VALUE (SEE Note 1 and 2) ≥ 200 milliwatt -64 dBm < 200 milliwatt -62 dBm Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. TABLE 9: DFS RESPONSE REQUIREMENT VALUES PARAMETER VALUE Non-occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1. Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second period. See Notes 1 and 2. U-NII Detection Bandwidth Minimum 80% of the UNII 99% transmission power bandwidth. See Note 3. Note 1: The instant that the Channel Move Time and the Channel Closing Transmission Time begins is as follows: • For the Short Pulse Radar Test Signals this instant is the end of the Burst. • For the Frequency Hopping radar Test Signal, this instant is the end of the last radar Burst generated. • For the Long Pulse Radar Test Signal this instant is the end of the 12 second period defining the Radar Waveform. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 1 is used and for each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. Report No.: RF130303C07-2 10 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

PARAMETERS OF DFS TEST SIGNALS Step intervals of 0.1 microsecond for Pulse Width, 1 microsecond for PRI, 1 MHz for chirp width and 1 for the number of pulses will be utilized for the random determination of specific test waveforms. TABLE 10: SHORT PULSE RADAR TEST WAVEFORMS MINIMUM PULSE PERCENTAGE MINIMUM WIDTH NUMBER OF RADAR TYPE PRI (µsec) OF NUMBER OF PULSES (µsec) SUCCESSFUL TRIALS DETECTION 1 1 1428 18 60% 30 2 1-5 150-230 23-29 60% 30 3 6-10 200-500 16-18 60% 30 4 11-20 200-500 12-16 60% 30 Aggregate (Radar Types 1-4) 80% 120 TABLE 11: LONG PULSE RADAR TEST WAVEFORM CHIRP MINIMUM PULSE PRI NUMBER MINIMUM RADAR NUMBER PERCENTAGE OF WIDTH WIDTH OF PULSES NUMBER OF TYPE (µsec) OF BURSTS SUCCESSFUL (µsec) (MHz) PER BURST TRIALS DETECTION 5 50-100 5-20 1000-2000 1-3 8-20 80% 30 TABLE 12: FREQUENCY HOPPING RADAR TEST WAVEFORM PULSE HOPPING HOPPING MINIMUM MINIMUM RADAR PRI PULSES RATE SEQUENCE PERCENTAGE OF WIDTH NUMBER OF TYPE (µsec) PER HOP LENGTH SUCCESSFUL (µsec) (kHz) TRIALS (msec) DETECTION 6 1 333 9 0.333 300 70% 30 Report No.: RF130303C07-2 11 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

4. TEST & SUPPORT EQUIPMENT LIST 4.1 TEST INSTRUMENTS TABLE 1: TEST INSTRUMENTS LIST CALIBRATED DESCRIPTION & MANUFACTURER MODEL NO. BRAND UNTIL R&S Spectrum analyzer FSP40 R&S 2014/07/18 Signal generator 8645A Agilent 2014/06/24 Oscilloscope TDS 5104 Tektronix 2015/03/19 4.2 DESCRIPTION OF SUPPORT UNITS TABLE 2: SUPPORT UNIT INFORMATION NO. PRODUCT BRAND MODEL NO. FCC ID SPEC. 5G Ant gain : 3.428dB 1 Router D-Link DIR-868L RRK2012060056-1 Maximum EIRP : 27.64dBm NOTE: This device was functioned as a Master Slave device during the DFS test. TABLE 3: SOFTWARE/FIRMWARE INFORMATION SOFTWARE/FIRMWARE NO. PRODUCT MODEL NO. VERSION 1. Router DIR-868L 1.00 Report No.: RF130303C07-2 12 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

5. TEST PROCEDURE 5.1 BV ADT DFS MEASUREMENT SYSTEM A complete BV ADT DFS Measurement System consists of two subsystems: (1) the Radar Signal Generating Subsystem and (2) the Traffic Monitoring Subsystem. The control PC is necessary for generating the Radar waveforms in Table 6, 7 and 8. The traffic monitoring subsystem is specified to the type of unit under test (UUT). Radiated setup configuration of ADT DFS Measurement System The test transmission will always be from the Master Device to the Client Device. While the Client device is set up to associate with the Master device and play the MPEG file (6  Magic Hours) from Master device, the designated MPEG test file and instructions are located at: http://ntiacsd.ntia.doc.gov/dfs/. Report No.: RF130303C07-2 13 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL The measured channel is 5500MHz and 5510MHz. The radar signal was the same as transmitted channels, and injected into the AP (master) or Client Device with Radar Detection, measured the channel closing transmission time and channel move time. The calibrated conducted detection threshold level is set to -64dBm. The tested level is lower than required level hence it provides margin to the limit. Radiated setup configuration of Calibration of DFS Detection Threshold Level Report No.: RF130303C07-2 14 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

5.3 DEVIATION FROM TEST STANDARD No deviation. 5.4 RADIATED TEST SETUP CONFIGURATION 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE The UUT is a U-NII Device operating in Client mode without radar detection. The radar test signals are injected into the Master Device. Report No.: RF130303C07-2 15 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

6. TEST RESULTS 6.1 SUMMARY OF TEST RESULTS CLAUSE TEST PARAMETER REMARKS PASS/FAIL 15.407 DFS Detection Threshold Not Applicable NA 15.407 Channel Availability Check Time Not Applicable NA 15.407 Channel Move Time Applicable Pass 15.407 Channel Closing Transmission Time Applicable Pass 15.407 Non- Occupancy Period Applicable Pass 15.407 Uniform Spreading Not Applicable NA 15.407 U-NII Detection Bandwidth Not Applicable NA 15.407 Non-associated test Applicable Pass 15.407 Non-Co-Channel test Applicable Pass Report No.: RF130303C07-2 16 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

6.2 TEST RESULTS 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE Client with injection at the Master. (The radar test signals are injected into the Master Device) DFS DETECTION THRESHOLD For a detection threshold level of -64dBm, the required signal strength at EUT antenna location is -64 dBm. The tested level is lower than required level hence it provides margin to the limit. Radar signal Noise Floor Radar Signal 1 Report No.: RF130303C07-2 17 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME RADAR SIGNAL 1 802.11an 20MHz Radar Signal Traffic Signal Noise Floor NOTE: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time.T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Radar Signal Noise Floor NOTE: An expanded plot for the device vacates the channel in the required 500ms. Report No.: RF130303C07-2 18 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

RADAR SIGNAL 1 802.11an 40MHz Radar Signal Traffic Signal Noise Floor NOTE: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time.T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Radar Signal Noise Floor NOTE: An expanded plot for the device vacates the channel in the required 500ms. Report No.: RF130303C07-2 19 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

6.2.3 NON-OCCUPANCY PERIOD Associate test: During the 30 minutes observation time, UUT did not make any transmissions on a channel after a radar signal was detected on that channel by either the Channel Availability Check or the In-Service Monitoring. 1) EUT (Client) links with master on 5500MHz. Waveform of EUT links up with Master * RBW 1 MHz * VBW 3 MHz Ref -10 dBm * Att 0 dB * SWT 50 ms -10 A -20 1 PK VIEW -30 -40 -50 -60 3DB -70 -80 -90 -100 -110 Center 5.5 GHz 5 MHz/ Span 50 MHz 2) Client plays specified files via master. Waveform of transmission * RBW 1 MHz * VBW 3 MHz Ref -10 dBm * Att 0 dB * SWT 50 ms -10 A -20 1 PK VIEW -30 2 AP VIEW -40 -50 -60 3DB -70 -80 -90 -100 -110 Center 5.5 GHz 5 MHz/ Span 50 MHz Report No.: RF130303C07-2 20 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

3) Radar signal 1 is applied to the Master device and WiFi traffic signal stop immediately. 4) 5500MHz has been monitored in 30 minutes period. In this period, no any transmission occurs. Plot of 30minutes period 802.11n 20MHz Traffic Signal Injected into Radar Noise Floor NOTE: Test setup are shown on Test Setup Photo.pdf Report No.: RF130303C07-2 21 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

6.2.4 NON-ASSOCIATED TEST Master was off. During the 30 minutes observation time, The UUT did not make any transmissions in the DFS band after UUT power up. Noise Floor 6.2.5 NON- CO-CHANNEL TEST The UUT was investigated after radar was detected the channel and made sure no co-channel operation with radars. Report No.: RF130303C07-2 22 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

7. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF130303C07-2 23 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

8. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF130303C07-2 24 of 25 Report Format Version 5.0.0 Reference No.: 140303C06

9. APPENDIX A – MODIFIACATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF130303C07-2 25 of 25 Report Format Version 5.0.0 Reference No.: 140303C06


Document Created: 2018-07-01 17:56:12
Document Modified: 2018-07-01 17:56:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC