RF Exposure Info (SAR-B).pdf

FCC ID: NM80P6B160

RF Exposure Info

Download: PDF
FCCID_2196203

FCC SAR Test Report

Appendix B. SAR Plots of SAR Measurement

The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band
combination, and measured SAR > 1.5 W/kg are shown as follows.




Report Format Version 5.0.0                                                      Issued Date   : Jan. 21, 2014
Report No. : SA131204C31
Revision : R01


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P01 GSM850_GPRS10_Right Cheek_Ch128_Sample1_Ant1

DUT: 131204C32

Communication System: GPRS10; Frequency: 824.2 MHz;Duty Cycle: 1:4
Medium: H835_0103 Medium parameters used: f = 824.2 MHz; σ = 0.878 S/m; εr = 43.014; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(9.96, 9.96, 9.96); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (71x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.771 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 17.874 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.905 W/kg
SAR(1 g) = 0.579 W/kg; SAR(10 g) = 0.361 W/kg
Maximum value of SAR (measured) = 0.748 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/02

P02 GSM1900_GPRS10_Right Cheek_Ch661_Sample1_Ant1

DUT: 131204C32

Communication System: GPRS10; Frequency: 1880 MHz;Duty Cycle: 1:4
Medium: H1900_0102 Medium parameters used: f = 1880 MHz; σ = 1.402 S/m; εr = 40.48; ρ = 1000
kg/m3
Ambient Temperature:21.7 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.2, 8.2, 8.2); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.43 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 13.669 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 1.61 W/kg
SAR(1 g) = 0.903 W/kg; SAR(10 g) = 0.486 W/kg
Maximum value of SAR (measured) = 1.23 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/02

P03 WCDMA II_RMC12.2K_Right Cheek_Ch9262_Sample1_Ant1

DUT: 131204C32

Communication System: WCDMA; Frequency: 1852.4 MHz;Duty Cycle: 1:1
Medium: H1900_0102 Medium parameters used: f = 1852.4 MHz; σ = 1.37 S/m; εr = 40.633; ρ =
1000 kg/m3
Ambient Temperature:21.7 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.2, 8.2, 8.2); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.60 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 15.472 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.76 W/kg
SAR(1 g) = 1.01 W/kg; SAR(10 g) = 0.550 W/kg
Maximum value of SAR (measured) = 1.37 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P04 WCDMA IV_RMC12.2K_Right Cheek_Ch1513_Sample1_Ant1

DUT: 131204C32

Communication System: WCDMA; Frequency: 1752.6 MHz;Duty Cycle: 1:1
Medium: H1750_0103 Medium parameters used: f = 1753 MHz; σ = 1.359 S/m; εr = 40.563; ρ =
1000 kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:20.9 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.49, 8.49, 8.49); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.47 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 17.135 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 1.50 W/kg
SAR(1 g) = 0.910 W/kg; SAR(10 g) = 0.508 W/kg
Maximum value of SAR (measured) = 1.17 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P05 WCDMA V_RMC12.2K_Right Cheek_Ch4182_Sample1_Ant1

DUT: 131204C32

Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1
Medium: H835_0103 Medium parameters used: f = 836.4 MHz; σ = 0.891 S/m; εr = 42.876; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(9.96, 9.96, 9.96); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (71x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.255 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 9.475 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 0.327 W/kg
SAR(1 g) = 0.195 W/kg; SAR(10 g) = 0.117 W/kg
Maximum value of SAR (measured) = 0.259 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P06 LTE 4_QPSK_20M_Right Cheek_Ch20175_Sample1_Ant1_1RB_OS50

DUT: 131204C32

Communication System: LTE 4; Frequency: 1732.5 MHz;Duty Cycle: 1:1
Medium: H1750_0103 Medium parameters used: f = 1732.5 MHz; σ = 1.338 S/m; εr = 40.663; ρ =
1000 kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:20.9 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.49, 8.49, 8.49); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.08 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 17.695 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 1.05 W/kg
SAR(1 g) = 0.638 W/kg; SAR(10 g) = 0.357 W/kg
Maximum value of SAR (measured) = 0.846 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/09

P07 LTE 7_QPSK_20M_Right Cheek_Ch21350_Sample1_Ant1_1RB_OS50

DUT: 131204C32

Communication System: LTE 7; Frequency: 2560 MHz;Duty Cycle: 1:1
Medium: H2600_0109 Medium parameters used: f = 2560 MHz; σ = 2.001 S/m; εr = 37.928; ρ =
1000 kg/m3
Ambient Temperature:21.9 ℃; Liquid Temperature:21.6 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.26, 7.26, 7.26); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (71x141x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 1.62 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 7.912 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 2.20 W/kg
SAR(1 g) = 0.999 W/kg; SAR(10 g) = 0.455 W/kg
Maximum value of SAR (measured) = 1.54 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P08 LTE 17_QPSK_10M_Right Cheek_Ch23800_Sample1_Ant1_1RB_OS24

DUT: 131204C32

Communication System: LTE 17; Frequency: 711 MHz;Duty Cycle: 1:1
Medium: H750_0103 Medium parameters used: f = 711 MHz; σ = 0.869 S/m; εr = 41.663; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.41, 10.41, 10.41); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.541 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 16.811 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.727 W/kg
SAR(1 g) = 0.405 W/kg; SAR(10 g) = 0.248 W/kg
Maximum value of SAR (measured) = 0.547 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/04

P09 802.11b_Left Cheek_Ch1_Sample1

DUT: 131204C32

Communication System: WLAN_2.4G; Frequency: 2412 MHz;Duty Cycle: 1:1
Medium: H2450_0104 Medium parameters used: f = 2412 MHz; σ = 1.777 S/m; εr = 39.004; ρ =
1000 kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.47, 7.47, 7.47); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (91x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 0.978 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 4.762 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 1.59 W/kg
SAR(1 g) = 0.608 W/kg; SAR(10 g) = 0.262 W/kg
Maximum value of SAR (measured) = 0.980 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/05

P10 802.11n_HT20_Left Cheek_Ch36_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5180 MHz;Duty Cycle: 1:1.18
Medium: H5G_0105 Medium parameters used: f = 5180 MHz; σ = 4.771 S/m; εr = 35.439; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:21.1 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(5.33, 5.33, 5.33); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (91x161x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.586 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 3.738 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 0.914 W/kg
SAR(1 g) = 0.173 W/kg; SAR(10 g) = 0.058 W/kg
Maximum value of SAR (measured) = 0.376 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

P11 802.11a_Left Cheek_Ch52_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5260 MHz;Duty Cycle: 1:1.18
Medium: H5G_0106 Medium parameters used: f = 5260 MHz; σ = 4.923 S/m; εr = 35.998; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(5.13, 5.13, 5.13); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (91x171x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.562 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 3.291 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.825 W/kg
SAR(1 g) = 0.092 W/kg; SAR(10 g) = 0.032 W/kg
Maximum value of SAR (measured) = 0.208 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

P12 802.11n_HT20_Right Cheek_Ch140_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5700 MHz;Duty Cycle: 1:1.18
Medium: H5G_0106 Medium parameters used: f = 5700 MHz; σ = 5.413 S/m; εr = 35.223; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.67, 4.67, 4.67); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.496 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 5.447 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.459 W/kg
SAR(1 g) = 0.099 W/kg; SAR(10 g) = 0.027 W/kg
Maximum value of SAR (measured) = 0.248 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

P13 802.11a_Left Cheek_Ch157_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5785 MHz;Duty Cycle: 1:1.18
Medium: H5G_0106 Medium parameters used: f = 5785 MHz; σ = 5.507 S/m; εr = 35.07; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.67, 4.67, 4.67); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.177 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 5.561 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 0.722 W/kg
SAR(1 g) = 0.109 W/kg; SAR(10 g) = 0.025 W/kg
Maximum value of SAR (measured) = 0.266 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

P14 GSM850_GPRS10_Rear Face_1cm_Ch128_Sample1_Ant0

DUT: 131204C32

Communication System: GPRS10; Frequency: 824.2 MHz;Duty Cycle: 1:4
Medium: B835_1226 Medium parameters used: f = 824.2 MHz; σ = 0.987 S/m; εr = 56.783; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.14, 10.14, 10.14); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.276 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 13.929 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 0.345 W/kg
SAR(1 g) = 0.209 W/kg; SAR(10 g) = 0.123 W/kg
Maximum value of SAR (measured) = 0.282 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

P15 GSM1900_GPRS10_Front Face_1cm_Ch661_Sample1_Ant0

DUT: 131204C32

Communication System: GPRS10; Frequency: 1880 MHz;Duty Cycle: 1:4
Medium: B1900_1227 Medium parameters used: f = 1880 MHz; σ = 1.533 S/m; εr = 53.495; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.87, 7.87, 7.87); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)



- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.450 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 6.835 V/m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 0.599 W/kg
SAR(1 g) = 0.353 W/kg; SAR(10 g) = 0.192 W/kg
Maximum value of SAR (measured) = 0.397 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

P16 WCDMA II_RMC12.2K_Front Face_1cm_Ch9262_Sample1_Ant0

DUT: 131204C32

Communication System: WCDMA; Frequency: 1852.4 MHz;Duty Cycle: 1:1
Medium: B1900_1227 Medium parameters used: f = 1852.4 MHz; σ = 1.499 S/m; εr = 53.594; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.87, 7.87, 7.87); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)



- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.722 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 7.378 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 0.928 W/kg
SAR(1 g) = 0.557 W/kg; SAR(10 g) = 0.306 W/kg
Maximum value of SAR (measured) = 0.622 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P17 WCDMA IV_RMC12.2k_Rear Face_1cm_Ch1413_Sample1_Ant0

DUT: 131204C32

Communication System: WCDMA; Frequency: 1732.6 MHz;Duty Cycle: 1:1
Medium: B1750_0103 Medium parameters used: f = 1733 MHz; σ = 1.48 S/m; εr = 52.446; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.9 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.1, 8.1, 8.1); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.504 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 9.489 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 0.577 W/kg
SAR(1 g) = 0.399 W/kg; SAR(10 g) = 0.267 W/kg
Maximum value of SAR (measured) = 0.491 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

P18 WCDMA V_RMC12.2K_Front Face_1cm_Ch4182_Sample1_Ant0

DUT: 131204C32

Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1
Medium: B835_1226 Medium parameters used: f = 836.4 MHz; σ = 1 S/m; εr = 56.665; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.14, 10.14, 10.14); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.206 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 10.841 V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 0.290 W/kg
SAR(1 g) = 0.176 W/kg; SAR(10 g) = 0.102 W/kg
Maximum value of SAR (measured) = 0.225 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

P19 LTE 4_QPSK_20M_Rear Face_1cm_Ch20175_Sample1_Ant0_1RB_OS50

DUT: 131204C32

Communication System: LTE 4; Frequency: 1732.5 MHz;Duty Cycle: 1:1
Medium: B1750_1227 Medium parameters used: f = 1732.5 MHz; σ = 1.466 S/m; εr = 52.151; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.1, 8.1, 8.1); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.602 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.408 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.692 W/kg
SAR(1 g) = 0.485 W/kg; SAR(10 g) = 0.326 W/kg
Maximum value of SAR (measured) = 0.594 W/kg

- Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.408 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.666 W/kg
SAR(1 g) = 0.413 W/kg; SAR(10 g) = 0.265 W/kg
Maximum value of SAR (measured) = 0.566 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P20 LTE 7_QPSK_20M_Front Face_1cm_Ch21100_Sample1_Ant0_1RB_OS50

DUT: 131204C32

Communication System: LTE 7; Frequency: 2535 MHz;Duty Cycle: 1:1
Medium: B2600_0103 Medium parameters used: f = 2535 MHz; σ = 2.104 S/m; εr = 52.304; ρ =
1000 kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.26, 7.26, 7.26); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (71x141x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 0.828 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.763 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.15 W/kg
SAR(1 g) = 0.552 W/kg; SAR(10 g) = 0.286 W/kg
Maximum value of SAR (measured) = 0.823 W/kg

- Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.763 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.763 W/kg
SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.218 W/kg
Maximum value of SAR (measured) = 0.570 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

P21 LTE 17_QPSK_10M_Rear Face_1cm_Ch23800_Sample1_Ant0_1RB_OS24

DUT: 131204C32

Communication System: LTE 17; Frequency: 711 MHz;Duty Cycle: 1:1
Medium: B750_1226 Medium parameters used: f = 711 MHz; σ = 0.936 S/m; εr = 55.841; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.15, 10.15, 10.15); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.142 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.218 V/m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 0.175 W/kg
SAR(1 g) = 0.104 W/kg; SAR(10 g) = 0.060 W/kg
Maximum value of SAR (measured) = 0.136 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

P22 802.11b_Front Face_1cm_Ch1_Sample1

DUT: 131204C32

Communication System: WLAN_2.4G; Frequency: 2412 MHz;Duty Cycle: 1:1
Medium: B2450_0103 Medium parameters used: f = 2412 MHz; σ = 1.91 S/m; εr = 51.504; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.4, 7.4, 7.4); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (91x151x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 0.113 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 3.083 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 0.142 W/kg
SAR(1 g) = 0.078 W/kg; SAR(10 g) = 0.040 W/kg
Maximum value of SAR (measured) = 0.113 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

P23 802.11n_HT20_Rear Face_1cm_Ch36_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5180 MHz;Duty Cycle: 1:1.18
Medium: B5G_0107 Medium parameters used: f = 5180 MHz; σ = 5.371 S/m; εr = 47.777; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.49, 4.49, 4.49); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.0888 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 1.187 V/m; Power Drift = -0.09 dB
Peak SAR (extrapolated) = 0.409 W/kg
SAR(1 g) = 0.049 W/kg; SAR(10 g) = 0.015 W/kg
Maximum value of SAR (measured) = 0.0969 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

P24 802.11n_HT20_Rear Face_1cm_Ch52_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5260 MHz;Duty Cycle: 1:1.18
Medium: B5G_0107 Medium parameters used: f = 5260 MHz; σ = 5.481 S/m; εr = 47.619; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.01, 4.01, 4.01); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.0774 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 0 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 0.232 W/kg
SAR(1 g) = 0.033 W/kg; SAR(10 g) = 0.00882 W/kg
Maximum value of SAR (measured) = 0.0697 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

P25 802.11a_Front Face_1cm_Ch140_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5700 MHz;Duty Cycle: 1:1.18
Medium: B5G_0107 Medium parameters used: f = 5700 MHz; σ = 6.095 S/m; εr = 46.733; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(3.93, 3.93, 3.93); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.0213 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 0.577 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 0.0850 W/kg
SAR(1 g) = 0.013 W/kg; SAR(10 g) = 0.00328 W/kg
Maximum value of SAR (measured) = 0.0295 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

P26 802.11n_HT20_Front Face_1cm_Ch165_Sample1

DUT: 131204C32

Communication System: WLAN_5G; Frequency: 5825 MHz;Duty Cycle: 1:1.18
Medium: B5G_0107 Medium parameters used: f = 5825 MHz; σ = 6.279 S/m; εr = 46.488; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(3.93, 3.93, 3.93); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.0257 W/kg

- Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm
Reference Value = 0.908 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.0720 W/kg
SAR(1 g) = 0.013 W/kg; SAR(10 g) = 0.003 W/kg
Maximum value of SAR (measured) = 0.0346 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

P27 GSM850_GPRS10_Left Side_1cm_Ch128_Sample1_Ant0

DUT: 131204C32

Communication System: GPRS10; Frequency: 824.2 MHz;Duty Cycle: 1:4
Medium: B835_1226 Medium parameters used: f = 824.2 MHz; σ = 0.987 S/m; εr = 56.783; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.14, 10.14, 10.14); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


- Area Scan (31x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.325 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 18.386 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.368 W/kg
SAR(1 g) = 0.266 W/kg; SAR(10 g) = 0.186 W/kg
Maximum value of SAR (measured) = 0.322 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

P28 GSM1900_GPRS10_Bottom Side_1cm_Ch661_Sample1_Ant0

DUT: 131204C32

Communication System: GPRS10; Frequency: 1880 MHz;Duty Cycle: 1:4
Medium: B1900_1227 Medium parameters used: f = 1880 MHz; σ = 1.533 S/m; εr = 53.495; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.87, 7.87, 7.87); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)



- Area Scan (61x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.782 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 20.151 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 0.917 W/kg
SAR(1 g) = 0.540 W/kg; SAR(10 g) = 0.291 W/kg
Maximum value of SAR (measured) = 0.593 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

P29 WCDMA II_RMC12.2K_Bottom Side_1cm_Ch9262_Sample1_Ant0

DUT: 131204C32

Communication System: WCDMA; Frequency: 1852.4 MHz;Duty Cycle: 1:1
Medium: B1900_1227 Medium parameters used: f = 1852.4 MHz; σ = 1.499 S/m; εr = 53.594; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.87, 7.87, 7.87); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)



- Area Scan (61x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.11 W/kg

- Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 25.064 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 1.30 W/kg
SAR(1 g) = 0.780 W/kg; SAR(10 g) = 0.425 W/kg
Maximum value of SAR (measured) = 0.855 W/kg



Document Created: 2014-01-24 09:56:41
Document Modified: 2014-01-24 09:56:41

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC