RF Exposure Info (SAR-A).pdf

FCC ID: NM80P6B160

RF Exposure Info

Download: PDF
FCCID_2196202

FCC SAR Test Report


Appendix A. SAR Plots of System Verification

The plots for system verification with largest deviation for each SAR system combination are shown as follows.




Report Format Version 5.0.0                                                           Issued Date   : Jan. 21, 2014
Report No. : SA131204C31
Revision : R01


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_H750_140103

DUT: Dipole 750 MHz; Type: D750V3; SN: 1013

Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1
Medium: H750_0103 Medium parameters used: f = 750 MHz; σ = 0.906 S/m; εr = 41.293; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.41, 10.41, 10.41); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 2.86 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 57.025 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 3.36 W/kg
SAR(1 g) = 2.26 W/kg; SAR(10 g) = 1.5 W/kg
Maximum value of SAR (measured) = 2.86 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_H835_140103

DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121

Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: H835_0103 Medium parameters used: f = 835 MHz; σ = 0.889 S/m; εr = 42.896; ρ = 1000
kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(9.96, 9.96, 9.96); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 2.96 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 58.657 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 3.58 W/kg
SAR(1 g) = 2.38 W/kg; SAR(10 g) = 1.56 W/kg
Maximum value of SAR (measured) = 3.03 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_H1750_140103

DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055

Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: H1750_0103 Medium parameters used: f = 1750 MHz; σ = 1.356 S/m; εr = 40.578; ρ =
1000 kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:20.9 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.49, 8.49, 8.49); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.0 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 97.607 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 15.6 W/kg
SAR(1 g) = 8.69 W/kg; SAR(10 g) = 4.62 W/kg
Maximum value of SAR (measured) = 12.3 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/02

System Check_H1900_140102

DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036

Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: H1900_0102 Medium parameters used: f = 1900 MHz; σ = 1.43 S/m; εr = 40.37; ρ = 1000
kg/m3
Ambient Temperature:21.7 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.2, 8.2, 8.2); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.8 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 99.757 V/m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 18.9 W/kg
SAR(1 g) = 9.77 W/kg; SAR(10 g) = 4.91 W/kg
Maximum value of SAR (measured) = 14.4 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/04

System Check_H2450_140104

DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737

Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: H2450_0104 Medium parameters used: f = 2450 MHz; σ = 1.824 S/m; εr = 38.856; ρ =
1000 kg/m3
Ambient Temperature:21.7 ℃; Liquid Temperature:21.1 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.47, 7.47, 7.47); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 19.5 W/kg

Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 105.0 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 26.8 W/kg
SAR(1 g) = 12.5 W/kg; SAR(10 g) = 5.68 W/kg
Maximum value of SAR (measured) = 19.4 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/09

System Check_H2600_140109

DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020

Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1
Medium: H2600_0109 Medium parameters used: f = 2600 MHz; σ = 2.049 S/m; εr = 37.739; ρ =
1000 kg/m3
Ambient Temperature:21.9 ℃; Liquid Temperature:21.6 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.26, 7.26, 7.26); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 21.3 W/kg

Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 103.1 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 29.1 W/kg
SAR(1 g) = 14.2 W/kg; SAR(10 g) = 6.77 W/kg
Maximum value of SAR (measured) = 21.4 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/05

System Check_H5200_140105

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5200 MHz;Duty Cycle: 1:1
Medium: H5G_0105 Medium parameters used: f = 5200 MHz; σ = 4.788 S/m; εr = 35.428; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:21.1 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(5.33, 5.33, 5.33); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 15.4 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 57.582 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 32.8 W/kg
SAR(1 g) = 7.42 W/kg; SAR(10 g) = 2.09 W/kg
Maximum value of SAR (measured) = 15.6 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

System Check_H5300_140106

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5300 MHz;Duty Cycle: 1:1
Medium: H5G_0106 Medium parameters used: f = 5300 MHz; σ = 4.97 S/m; εr = 35.931; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(5.13, 5.13, 5.13); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 17.1 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 61.330 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 35.1 W/kg
SAR(1 g) = 8.31 W/kg; SAR(10 g) = 2.34 W/kg
Maximum value of SAR (measured) = 17.2 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

System Check_H5600_140106

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: H5G_0106 Medium parameters used: f = 5600 MHz; σ = 5.302 S/m; εr = 35.397; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.78, 4.78, 4.78); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 18.5 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 63.715 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 37.8 W/kg
SAR(1 g) = 8.75 W/kg; SAR(10 g) = 2.48 W/kg
Maximum value of SAR (measured) = 18.7 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/06

System Check_H5800_140106

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1
Medium: H5G_0106 Medium parameters used: f = 5800 MHz; σ = 5.524 S/m; εr = 35.045; ρ = 1000
kg/m3
Ambient Temperature:21.2 ℃; Liquid Temperature:20.5 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.67, 4.67, 4.67); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 15.8 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 56.047 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 33.8 W/kg
SAR(1 g) = 7.37 W/kg; SAR(10 g) = 2.09 W/kg
Maximum value of SAR (measured) = 15.7 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

System Check_B750_131226

DUT: Dipole 750 MHz; Type: D750V3; SN: 1013

Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1
Medium: B750_1226 Medium parameters used: f = 750 MHz; σ = 0.969 S/m; εr = 55.526; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.15, 10.15, 10.15); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 2.82 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 54.707 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 3.35 W/kg
SAR(1 g) = 2.29 W/kg; SAR(10 g) = 1.54 W/kg
Maximum value of SAR (measured) = 2.87 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/26

System Check_B835_131226

DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121

Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: B835_1226 Medium parameters used: f = 835 MHz; σ = 0.998 S/m; εr = 56.679; ρ = 1000
kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.7 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(10.14, 10.14, 10.14); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 3.10 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 56.327 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 3.65 W/kg
SAR(1 g) = 2.48 W/kg; SAR(10 g) = 1.64 W/kg
Maximum value of SAR (measured) = 3.13 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

System Check_B1750_131227

DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055

Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: B1750_1227 Medium parameters used: f = 1750 MHz; σ = 1.487 S/m; εr = 52.082; ρ =
1000 kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.1, 8.1, 8.1); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.1 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 95.471 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 16.2 W/kg
SAR(1 g) = 9.31 W/kg; SAR(10 g) = 5.02 W/kg
Maximum value of SAR (measured) = 13.1 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_B1750_140103

DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055

Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: B1750_0103 Medium parameters used: f = 1750 MHz; σ = 1.499 S/m; εr = 52.347; ρ =
1000 kg/m3
Ambient Temperature:21.5 ℃; Liquid Temperature:20.9 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(8.1, 8.1, 8.1); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.0 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 95.050 V/m; Power Drift = -0.09 dB
Peak SAR (extrapolated) = 16.1 W/kg
SAR(1 g) = 9.27 W/kg; SAR(10 g) = 5 W/kg
Maximum value of SAR (measured) = 13.0 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2013/12/27

System Check_B1900_131227

DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036

Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: B1900_1227 Medium parameters used: f = 1900 MHz; σ = 1.56 S/m; εr = 53.444; ρ = 1000
kg/m3
Ambient Temperature:21.3 ℃; Liquid Temperature:21.0 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.87, 7.87, 7.87); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.7 W/kg

Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 95.595 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 17.3 W/kg
SAR(1 g) = 9.61 W/kg; SAR(10 g) = 4.98 W/kg
Maximum value of SAR (measured) = 13.8 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_B2450_140103

DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737

Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: B2450_0103 Medium parameters used: f = 2450 MHz; σ = 1.972 S/m; εr = 51.404; ρ =
1000 kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.4, 7.4, 7.4); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 20.3 W/kg

Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 101.8 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 27.6 W/kg
SAR(1 g) = 13.1 W/kg; SAR(10 g) = 6.04 W/kg
Maximum value of SAR (measured) = 20.3 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/03

System Check_B2600_140103

DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020

Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1
Medium: B2600_0103 Medium parameters used: f = 2600 MHz; σ = 2.192 S/m; εr = 52.097; ρ =
1000 kg/m3
Ambient Temperature:21.6 ℃; Liquid Temperature:20.8 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(7.26, 7.26, 7.26); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1485
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 21.9 W/kg

Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 98.567 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 29.9 W/kg
SAR(1 g) = 13.7 W/kg; SAR(10 g) = 6.09 W/kg
Maximum value of SAR (measured) = 21.5 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

System Check_B5200_140107

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5200 MHz;Duty Cycle: 1:1
Medium: B5G_0107 Medium parameters used: f = 5200 MHz; σ = 5.395 S/m; εr = 47.744; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.49, 4.49, 4.49); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 15.4 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 55.366 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 31.2 W/kg
SAR(1 g) = 7.4 W/kg; SAR(10 g) = 2.08 W/kg
Maximum value of SAR (measured) = 15.4 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

System Check_B5300_140107

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5300 MHz;Duty Cycle: 1:1
Medium: B5G_0107 Medium parameters used: f = 5300 MHz; σ = 5.537 S/m; εr = 47.539; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(4.01, 4.01, 4.01); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 14.8 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 55.644 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 28.9 W/kg
SAR(1 g) = 7 W/kg; SAR(10 g) = 1.98 W/kg
Maximum value of SAR (measured) = 14.5 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

System Check_B5600_140107

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: B5G_0107 Medium parameters used: f = 5600 MHz; σ = 5.958 S/m; εr = 46.934; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(3.69, 3.69, 3.69); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 18.8 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 59.278 V/m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 35.0 W/kg
SAR(1 g) = 8.52 W/kg; SAR(10 g) = 2.41 W/kg
Maximum value of SAR (measured) = 17.9 W/kg


Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab             Date: 2014/01/07

System Check_B5800_140107

DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1018

Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1
Medium: B5G_0107 Medium parameters used: f = 5800 MHz; σ = 6.235 S/m; εr = 46.547; ρ = 1000
kg/m3
Ambient Temperature:21.8 ℃; Liquid Temperature:21.4 ℃

DASY5 Configuration:
- Probe: EX3DV4 - SN3864; ConvF(3.93, 3.93, 3.93); Calibrated: 2013/07/31;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1277; Calibrated: 2013/07/26
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1204
- Measurement SW: DASY52, Version 52.8 (4); SEMCAD X Version 14.6.8 (7028)


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 17.1 W/kg

Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 56.614 V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 33.1 W/kg
SAR(1 g) = 7.78 W/kg; SAR(10 g) = 2.19 W/kg
Maximum value of SAR (measured) = 16.7 W/kg



Document Created: 2014-01-24 09:56:06
Document Modified: 2014-01-24 09:56:06

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC