Test report (Part 22) rev1

FCC ID: NM80P4E230

Test Report

Download: PDF
FCCID_2073104

FCC TEST REPORT (PART 22) REPORT NO.: RF130722C16 MODEL NO.: 0P4E230 FCC ID: NM80P4E230 RECEIVED: Jul. 16, 2013 TESTED: Aug. 01, 2013 ~ Aug. 08, 2013 ISSUED: Sep. 05, 2013 APPLICANT: HTC Corporation ADDRESS: No. 23, Xinghua Rd., Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130722C16 1 of 33 Report Format Version 5.0.0 Reference No. 130716C20

TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1 CERTIFICATION ........................................................................................................ 4 2 SUMMARY OF TEST RESULTS................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY .............................................................................. 5 2.2 TEST SITE AND INSTRUMENTS ............................................................................... 6 3 GENERAL INFORMATION ......................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................... 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST ......................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................ 8 3.4 TEST ITEM AND TEST CONFIGURATION ................................................................ 9 3.5 EUT OPERATING CONDITIONS.............................................................................. 10 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 10 4 TEST TYPES AND RESULTS................................................................................... 11 4.1 OUTPUT POWER MEASUREMENT ........................................................................ 11 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ...................................................... 11 4.1.2 TEST PROCEDURES .............................................................................................. 11 4.1.3 TEST SETUP ........................................................................................................... 12 4.1.4 TEST RESULTS ....................................................................................................... 13 4.2 FREQUENCY STABILITY MEASUREMENT ............................................................ 15 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT ......................................... 15 4.2.2 TEST PROCEDURE ................................................................................................. 15 4.2.3 TEST SETUP ........................................................................................................... 15 4.2.4 TEST RESULTS ....................................................................................................... 16 4.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................ 17 4.3.1 TEST PROCEDURES .............................................................................................. 17 4.3.2 TEST SETUP ........................................................................................................... 17 4.3.3 TEST RESULTS ....................................................................................................... 18 4.4 BAND EDGE MEASUREMENT ................................................................................ 19 4.4.1 LIMITS OF BAND EDGE MEASUREMENT .............................................................. 19 4.4.2 TEST SETUP ........................................................................................................... 19 4.4.3 TEST PROCEDURES .............................................................................................. 19 4.4.4 TEST RESULTS ....................................................................................................... 20 4.5 CONDUCTED SPURIOUS EMISSIONS ................................................................... 21 4.5.1 LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT .................... 21 4.5.2 TEST PROCEDURE ................................................................................................. 21 4.5.3 TEST SETUP ........................................................................................................... 21 4.5.4 TEST RESULTS ....................................................................................................... 22 4.6 RADIATED EMISSION MEASUREMENT ................................................................. 23 4.6.1 LIMITS OF RADIATED EMISSION MEASUREMENT ............................................... 23 4.6.2 TEST PROCEDURES .............................................................................................. 23 4.6.3 DEVIATION FROM TEST STANDARD ..................................................................... 23 4.6.4 TEST SETUP ........................................................................................................... 24 4.6.5 TEST RESULTS ....................................................................................................... 25 5 PHOTOGRAPHS OF THE TEST CONFIGURATION ................................................ 31 6 INFORMATION ON THE TESTING LABORATORIES .............................................. 32 7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ............................................................................................. 33 Report No.: RF130722C16 2 of 33 Report Format Version 5.0.0 Reference No. 130716C20

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130722C16 Original release Sep. 05, 2013 Report No.: RF130722C16 3 of 33 Report Format Version 5.0.0 Reference No. 130716C20

1 CERTIFICATION PRODUCT: Smartphone MODEL: 0P4E230 BRAND: HTC APPLICANT: HTC Corporation TESTED: Aug. 01, 2013 ~ Aug. 08, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC PART 22, Subpart H The above equipment (model: 0P4E230) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Sep. 05, 2013 Ivonne Wu / Senior Specialist APPROVED BY : , DATE : Sep. 05, 2013 Sam Chen / Assistant Manager Report No.: RF130722C16 4 of 33 Report Format Version 5.0.0 Reference No. 130716C20

2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 22 & Part 2 STANDARD TEST TYPE RESULT REMARK SECTION 2.1046 Effective radiated power PASS Meet the requirement of limit. 22.913 (a) 2.1055 Frequency Stability PASS Meet the requirement of limit. 22.355 2.1049 Occupied Bandwidth PASS Meet the requirement of limit. 22.917 Band Edge Measurements PASS Meet the requirement of limit. 2.1051 Conducted Spurious Emissions PASS Meet the requirement of limit. 22.917 Meet the requirement of limit. 2.1053 Radiated Spurious Emissions PASS Minimum passing margin is 22.917 -13.68dB at 2509.20MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 150kHz~30MHz 2.44 dB 30MHz ~ 200MHz 2.93 dB 200MHz ~1000MHz 2.95 dB Radiated emissions 1GHz ~ 18GHz 2.26 dB 18GHz ~ 40GHz 1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF130722C16 5 of 33 Report Format Version 5.0.0 Reference No. 130716C20

2.2 TEST SITE AND INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCI 100744 Apr. 15, 2013 Apr. 14, 2014 ROHDE & SCHWARZ Spectrum Analyzer FSU43 101261 Dec. 17, 2012 Dec. 16, 2013 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-472 Mar. 25, 2013 Mar. 24, 2014 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-969 Jan. 07, 2013 Jan. 06, 2014 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Dec. 25, 2012 Dec. 24, 2013 SCHWARZBECK Loop Antenna HFH2-Z2 100070 Jan. 31, 2012 Jan. 30, 2014 Preamplifier EMC 012645 980115 Dec. 28, 2012 Dec. 27, 2013 EMCI Preamplifier EMC 184045 980116 Dec. 28, 2012 Dec. 27, 2013 EMCI Preamplifier EMC 330H 980112 Dec. 28, 2012 Dec. 27, 2013 EMCI RF signal cable SUCOFLEX 104 309219/4 Oct. 19, 2012 Oct. 18, 2013 HUBER+SUHNNER RF signal cable SUCOFLEX 104 250130/4 Oct. 19, 2012 Oct. 18, 2013 HUBER+SUHNNER RF signal cable RG-213 NA Dec. 29, 2012 Dec. 28, 2013 Worken Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF Mini-Circuits Power Splitter ZN2PD-9G NA Jul. 18, 2013 Jul. 17, 2014 JFW 20dB attenuation 50HF-020-SMA NA NA NA Communications E5515C MY52102544 Sep. 05, 2012 Sep. 04, 2013 Tester-Wireless Radio Communication MT8820C 6201300640 Aug. 01, 2013 Jul. 31, 2014 Analyzer NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 10. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 690701. 5. The IC Site Registration No. is IC 7450F-10. Report No.: RF130722C16 6 of 33 Report Format Version 5.0.0 Reference No. 130716C20

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Smartphone MODEL NO. 0P4E230 5.0Vdc (adapter or host equipment) POWER SUPPLY 3.8Vdc (battery) GSM/GPRS GMSK MODULATION TYPE EDGE GMSK, 8PSK WCDMA BPSK GSM/GPRS/EDGE 824.2MHz ~ 848.8MHz FREQUENCY RANGE WCDMA 826.4MHz ~ 846.6MHz GSM 805.38mW MAX. ERP POWER EDGE 746.45mW WCDMA 85.90mW GSM 248KGXW EMISSION EDGE 244KG7W DESIGNATOR WCDMA 4M17F9W MULTI-SLOTS CLASS 12 WCDMA RELEASE 6 VERSION ANTENNA TYPE Fixed Internal Antenna I/O PORTS Refer to users’ manual DATA CABLE Refer to NOTE as below ACCESSORY DEVICES Refer to NOTE as below NOTE: 1. This report is issued as a duplicate report to BV ADT report no.: 130716C20. The difference compared with original report is adding WCDMA Band IV, removing LTE band 7 by software, changing model name and FCC ID. The verified result for EUT of FCC ID: NM80P4E230 was not worse than FCC ID: NM80P4E200. Therefore, the original data was kept in this report. 2. The EUT’s accessories list refers to Ext. Pho. 3. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF130722C16 7 of 33 Report Format Version 5.0.0 Reference No. 130716C20

3.2 CONFIGURATION OF SYSTEM UNDER TEST FOR RADIATION EMISSION TEST |—D EUT (Powered from AC Adapter) Earphone zzz Test table $$ Universal Radio Communication Tester *Kept in a remote area FOR E.R.P. TEST EUT (Powered from battery) Py Test table $S Universal Radio Communication Tester *Kept in a remote area 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. Report No.: RF130722C16 8 of 33 Report Format Version 5.0.0 Reference No. 130716C20

3.4 TEST ITEM AND TEST CONFIGURATION Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates, XYZ axis and antenna ports The worst case was found when positioned on Y-plane for ERP and Y-axis for radiated emission. Following channel(s) was (were) selected for the final test as listed below: GSM MODE EUT AVAILABLE CONFIGURE TEST ITEM TESTED CHANNEL MODE CHANNEL MODE - ERP 128 to 251 128, 189, 251 GSM, EDGE - FREQUENCY STABILITY 128 to 251 189 GSM, EDGE - OCCUPIED BANDWIDTH 128 to 251 128, 189, 251 GSM, EDGE - BAND EDGE 128 to 251 128, 251 GSM, EDGE - CONDCUDETED EMISSION 128 to 251 189 GSM, EDGE - RADIATED EMISSION 128 to 251 189 GSM, EDGE WCDMA MODE EUT AVAILABLE CONFIGURE TEST ITEM TESTED CHANNEL MODE CHANNEL MODE - ERP 4132 to 4233 4132, 4182, 4233 WCDMA - FREQUENCY STABILITY 4132 to 4233 4182 WCDMA - OCCUPIED BANDWIDTH 4132 to 4233 4132, 4182, 4233 WCDMA - BAND EDGE 4132 to 4233 4132, 4233 WCDMA - CONDCUDETED EMISSION 4132 to 4233 4182 WCDMA - RADIATED EMISSION 4132 to 4233 4182 WCDMA TEST CONDITION: TEST ITEM ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY ERP 26deg. C, 58%RH 3.8Vdc Howard Kao FREQUENCY STABILITY 26deg. C, 58%RH 3.8Vdc Howard Kao OCCUPIED BANDWIDTH 26deg. C, 58%RH 3.8Vdc Howard Kao BAND EDGE 26deg. C, 58%RH 3.8Vdc Howard Kao CONDCUDETED EMISSION 26deg. C, 58%RH 3.8Vdc Howard Kao RADIATED EMISSION 25deg. C, 65%RH 120Vac, 60Hz Anson Lin Report No.: RF130722C16 9 of 33 Report Format Version 5.0.0 Reference No. 130716C20

3.5 EUT OPERATING CONDITIONS The EUT makes a call to the communication simulator. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC 47 CFR Part 2 FCC 47 CFR Part 22 ANSI/TIA/EIA-603-C 2004 NOTE: All test items have been performed and recorded as per the above standards. Report No.: RF130722C16 10 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4 TEST TYPES AND RESULTS 4.1 OUTPUT POWER MEASUREMENT 4.1.1 LIMITS OF QOUTPUT POWER MEASUREMENT Mobile / Portable station are limited to 7 watts e.r.p. 4.1.2 TEST PROCEDURES EIRP / ERP MEASUREMENT: a. All measurements were done at low, middle and high operational frequency range. RBW and VBW is 1MHz for GSM, GPRS & EDGE and 5MHz for WCDMA mode. . Substitution method is used for E.L.R.P measurement. In the semi—anechoic chamber, EUT placed on the 0.8m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1im to 4m to find the maximum polar radiated power. The "Read Value" is the spectrum reading the maximum power value. . The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a tx cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to "Read Value" of step b. Record the power level of S.G . EIRP = Output power level of S.G — TX cable loss + Antenna gain of substitution horn.E.R.P power can be calculated form E.1.R.P power by subtracting the gain of dipole, E.R.P power = E.L.R.P power — 2.150Bi. CONDUCTED POWER MEASUREMENT: The EUT was set up for the maximum power with GSM, GPRS, EDGE and WCDMA link data modulation and link up with simulator. Set the EUT to transmit under low, middle and high channel and record the power level shown on simulator. Report No.: RF130722C16 11 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.1.3 TEST SETUP EIRP / ERP MEASUREMENT: 1~4m 3m CONDUCTED POWER MEASUREMENT: COMMUNICATION EUT SIMULATOR Report No.: RF130722C16 12 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.1.4 TEST RESULTS CONDUCTED OUTPUT POWER (dBm) Band GSM850 Channel 128 189 251 Frequency (MHz) 824.2 836.4 848.8 GSM (GMSK, 1 Uplink) 33.99 33.95 33.94 GPRS 8 (GMSK, 1 Uplink) 33.98 33.94 33.93 GPRS 10 (GMSK, 2 Uplink) 32.00 31.99 31.91 GPRS 11 (GMSK, 3 Uplink) 30.50 30.46 30.36 GPRS 12 (GMSK, 4 Uplink) 29.00 28.97 28.93 EDGE 8 (GMSK, 1 Uplink) 34.31 34.75 34.64 EDGE 10 (GMSK, 2 Uplink) 31.15 31.59 31.48 EDGE 11 (GMSK, 3 Uplink) 28.93 29.37 29.26 EDGE 12 (GMSK, 4 Uplink) 27.59 28.00 27.92 EDGE 8 (8PSK, 1 Uplink) 27.38 27.34 27.24 EDGE 10 (8PSK, 2 Uplink) 27.11 27.07 26.97 EDGE 11 (8PSK, 3 Uplink) 26.94 26.90 26.80 EDGE 12 (8PSK, 4 Uplink) 24.49 24.45 24.35 Band WCDMA V Channel 4132 4182 4233 Frequency (MHz) 826.4 836.4 846.6 RMC 12.2K 24.35 24.50 24.04 HSDPA Subtest-1 23.21 23.49 22.90 HSDPA Subtest-2 21.61 21.89 21.30 HSDPA Subtest-3 20.13 20.41 19.82 HSDPA Subtest-4 20.01 20.29 19.70 HSUPA Subtest-1 23.04 23.32 22.73 HSUPA Subtest-2 21.24 21.52 20.93 HSUPA Subtest-3 21.99 22.27 21.68 HSUPA Subtest-4 21.36 21.64 21.05 HSUPA Subtest-5 23.29 23.57 22.98 Report No.: RF130722C16 13 of 33 Report Format Version 5.0.0 Reference No. 130716C20

ERP POWER (dBm) GSM Frequency LVL Correction Polarization Plane Channel ERP(dBm) ERP(mW) (MHz) (dBm) Factor(dB) (H/V) 128 824.2 -1.46 32.62 29.01 796.16 H 189 836.4 -1.89 32.52 28.48 704.69 H 251 848.8 -1.44 32.65 29.06 805.38 H Y 128 824.2 -8.89 32.76 21.72 148.59 V 189 836.4 -8.12 32.39 22.12 162.93 V 251 848.8 -8.70 32.54 21.69 147.57 V EDGE Frequency LVL Correction Polarization Plane Channel ERP(dBm) ERP(mW) (MHz) (dBm) Factor(dB) (H/V) 128 824.2 -1.74 32.62 28.73 746.45 H 189 836.4 -2.37 32.52 28.00 630.96 H 251 848.8 -2.37 32.65 28.13 650.13 H Y 128 824.2 -14.40 32.76 16.21 41.78 V 189 836.4 -13.61 32.39 16.63 46.03 V 251 848.8 -14.60 32.54 15.79 37.93 V WCDMA Frequency LVL Correction Polarization Plane Channel ERP(dBm) ERP(mW) (MHz) (dBm) Factor(dB) (H/V) 4132 826.4 -11.13 32.62 19.34 85.90 H 4182 836.4 -11.35 32.52 19.02 79.80 H 4233 846.6 -11.78 32.65 18.72 74.47 H Y 4132 826.4 -17.56 32.76 13.05 20.18 V 4182 836.4 -18.60 32.39 11.64 14.59 V 4233 846.6 -17.55 32.54 12.84 19.23 V Report No.: RF130722C16 14 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.2 FREQUENCY STABILITY MEASUREMENT 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT 1.5 ppm is for base and fixed station. 2.5 ppm is for mobile station. 4.2.2 TEST PROCEDURE a. Device is placed at the oven room. The oven room could control the temperatures and humidity. Power warm up is at least 15 min and power applied should perform before recording frequency error. b. EUT is connected the external power supply to control the DC input power. The test voltage range is from minimum to maximum working voltage. Each step shall be record the frequency error rate. c. The temperature range step is 10 degrees in this test items. All temperature levels shall be hold the +0.5°C during the measurement testing. The each temperature step shall be at least 0.5 hours, consider the EUT could be test under the stability condition. NOTE: The frequency error was recorded frequency error from the communication simulator. 4.2.3 TEST SETUP COMMUNICATION OvEN ROOM SIMULATOR ANTENNA EXTERNAL POWER SOURCE EUT DC POWER SUPPLY Report No.: RF130722C16 15 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.2.4 TEST RESULTS FREQUENCY ERROR vs. VOLTAGE FREQUENCY ERROR (ppm) VOLTAGE (Volts) LIMIT (ppm) GsSm EDGE WCDMA 3.8 0.009 0.021 —0.003 25 3.6 0.009 0.022 —0.002 25 4.34 0.007 0.023 —0.002 25 NOTE: The applicant defined the normal working voltage of the battery is from 3.6Vdc to 4.34Vdc. FREQUENCY ERROR vs. TEMPERATURE TEMP. (C) FREQUENCY ERROR (ppm) LIMIT (ppm) GSM EDGE WCDMA —30 0.010 0.026 —0.003 2.5 20 0.010 0.027 —0.003 2.5 —10 0.008 0.027 —0.002 2.5 0 0.008 0.027 —0.002 2.5 10 0.008 0.029 —0.001 2.5 20 0.011 0.028 —0.002 2.5 30 0.008 0.023 —0.003 2.5 40 0.009 0.023 —0.001 2.5 50 0.008 0.023 —0.002 2.5 60 0.009 0.024 —0.002 2.5 Report No.: RF130722C16 16 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.3 OCCUPIED BANDWIDTH MEASUREMENT 4.3.1 TEST PROCEDURES The EUT makes a call to the communication simulator. All measurements were done at low, middle and high operational frequency range. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency. Use OBW measurement function of Spectrum analyzer to measure 99 % occupied bandwidth. 4.3.2 TEST SETUP COMMUNICATION SIMULATOR POWER SPLITTER SPECTRUM ANALYZER 20dB ATTENUATION PAD EUT Report No.: RF130722C16 17 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.3.3 TEST RESULTS 99% OCCUPIED 99% OCCUPIED FREQUENCY BANDWIDTH (kHz) FREQUENCY BANDWIDTH (MHz) CHANNEL CHANNEL (MHz) (MHz) GSM EDGE WCDMA 128 824.2 245.40 243.70 4132 826.4 4.1714 189 836.4 247.62 242.09 4182 836.4 4.174 251 848.8 246.59 242.98 4233 846.6 4.1747 SPECTRUM PLOT OF WORST VALUE GSM EDGE WCDMA Report No.: RF130722C16 18 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.4 BAND EDGE MEASUREMENT 4.4.1 LIMITS OF BAND EDGE MEASUREMENT Power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. In the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. 4.4.2 TEST SETUP COMMUNICATION SIMULATOR POWER SPLITTER SPECTRUM ANALYZER 20dB ATTENUATION PAD EUT 4.4.3 TEST PROCEDURES a. All measurements were done at low and high operational frequency range. b. The center frequency of spectrum is the band edge frequency and span is 1MHz. RB of the spectrum is 3kHz and VB of the spectrum is 10kHz (GSM/GPRS/ EDGE). c. The center frequency of spectrum is the band edge frequency and span is 5MHz. RB of the spectrum is 100kHz and VB of the spectrum is 300kHz (WCDMA). d. Record the max trace plot into the test report. Report No.: RF130722C16 19 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.4.4 TEST RESULTS GSM CHANNEL 128 CHANNEL 251 EDGE CHANNEL 128 CHANNEL 251 WCDMA CHANNEL 4132 CHANNEL 4233 Report No.: RF130722C16 20 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.5 CONDUCTED SPURIOUS EMISSIONS 4.5.1 LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit equal to –13dBm. 4.5.2 TEST PROCEDURE a. The EUT makes a phone call to the communication simulator. All measurements were done at low, middle and high operational frequency range. b. Measuring frequency range is from 30 MHz to 9GHz. 10dB attenuation pad is connected with spectrum. RBW=1MHz and VBW=3MHz is used for conducted emission measurement. 4.5.3 TEST SETUP COMMUNICATION SIMULATOR POWER SPLITTER SPECTRUM ANALYZER 20dB ATTENUATION PAD EUT Report No.: RF130722C16 21 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.5.4 TEST RESULTS FREQUENCY RANGE : 30MHz~9GHz GSM EDGE CHANNEL 189 CHANNEL 189 WCDMA CHANNEL 4182 Report No.: RF130722C16 22 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.6 RADIATED EMISSION MEASUREMENT 4.6.1 LIMITS OF RADIATED EMISSION MEASUREMENT The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit equal to —13dBm. 4.6.2 TEST PROCEDURES a. Substitution method is used for E.L.R.P measurement. In the semi—anechoic chamber, EUT placed on the 0.8m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1im to 4m to find the maximum polar radiated power. The "Read Value" is the spectrum reading the maximum power value. . The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to "Read Value" of step a. Record the power level of S.G . EIRP = Output power level of S.G — TX cable loss + Antenna gain of substitution horn. . _E.R.P power can be calculated form E.1.R.P power by subtracting the gain of dipole, E.R.P power = E.1.R.P power — 2.150Bi. NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1MHz/3MHz. 4.6.3 DEVIATION FROM TEST STANDARD No deviation Report No.: RF130722C16 23 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.6.4 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF130722C16 24 of 33 Report Format Version 5.0.0 Reference No. 130716C20

4.6.5 TEST RESULTS GSM: Report No.: RF130722C16 25 of 33 Report Format Version 5.0.0 Reference No. 130716C20

Level (dBmim) Date: 2013—08—01 PART2224 648 10 11 1000 2000 4000 5000. 6000 7000. 8000. 2000 Frequency (MHz) : 966 Chamber 5 : PART22/24 3m VERTICAL Brand/Model.: OP4E200 : GSM850 Link : AnsonLin Temprature : 259C : 65% : ¥ Read Over Freq Level Level Limit Factor Remark MHz dBm/m dBm dB dB/m 45 —34.79 —33.26 —21.79 —1.53 Peak m ® w c \ ons w ib .01 —68.55 —62.11 —55.55 —6.44 Peak .19 —57.70 —51.70 —44.70 —6.00 Peak .70 —59.29 —53.18 —46.29 —6.11 Peak .30 —66.12 —65.00 —53.12 —1.12 Peak .60 —63.01 —64.82 —50.01 1.81 Peak .80 —38.20 —24.36 —25.20 —13.84 Peak .20 —26.68 —16.69 —13.68 —9.99 Peak .60 —54.78 —45.42 —41.78 —9.36 Peak .00 —40.07 —32.81 —27.07 —7.26 Peak Bous .20 —39.70 —41.24 —26.70 1.54 Peak

EDGE: Report No.: RF130722C16 27 of 33 Report Format Version 5.0.0 Reference No. 130716C20

Data: 6 Level (dBmim) Date: 2013—08—01 10 PART2224 648 —20 30 40 2 1 —50 —60 —70) 8 1000 2000 3000. 4000. 5000. 6000. 7000. 8000. 2000 Frequency (MHz) Site : 966 Chamber 5 Condition : PART22/24 3m VERTICAL Brand/Model: OP4E200 Remark : EDGE85®@ Link Tested by : AnsonLin Temprature : 25°C Humidity : 65% Plane :¥ Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm/m dBm dBm/m dB dB/m 1 1672.80 —46.19 —32.35 —13.00 —33.19 —13.84 Peak 2 pp 2509.20 —41.62 —31.63 —13.00 —28.62 —9.99 Peak

WCDMA: Report No.: RF130722C16 29 of 33 Report Format Version 5.0.0 Reference No. 130716C20

Data: 6 Level (dBmim) Date: 2013—08—01 10 PART2224 sa8 1000 2000 3000. 4000. 5000. 6000. 7000. 8000. 2000 Frequency (MHz) Site : 966 Chamber 5 Condition : PART22/24 3m VERTICAL Brand/Model: OP4E200 Remark : Band V Link Tested by : AnsonLin Temprature : 25°C Humidity : 65% Plane :¥ Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm/m dBm dBm/m dB dB/m 1 1672.80 —54.34 —40.50 —13.00 —41.34 —13.84 Peak 2 pp 2509.20 —53.01 —43.02 —13.00 —40.01 —9.99 Peak

5 PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF130722C16 31 of 33 Report Format Version 5.0.0 Reference No. 130716C20

6 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF130722C16 32 of 33 Report Format Version 5.0.0 Reference No. 130716C20

7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF130722C16 33 of 33 Report Format Version 5.0.0 Reference No. 130716C20


Document Created: 2013-09-13 18:14:12
Document Modified: 2013-09-13 18:14:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC