DFS client declaration

FCC ID: NM80P4E230

Attestation Statements

Download: PDF
FCCID_2073075

Declaration for DFS client devices September 11, 2013 Dear Examiner: Per KDB# 848637, We, HTC Corporation, declare that following description truly represent our product in consideration (FCC ID: NM80P4E230). Please do not hesitate to contact us, if further info is required. Thanks. a). A channel/frequency plan for the device showing the channels that have active scanning or passive scanning. Active scanning is where the device can transmit a probe (beacon) and passive scanning is where the device can listen only without probes. Below is the channel / frequency plan for the device CH 1 2 3 4 5 6 7 8 9 10 11 Frequency 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 (MHz) Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 38 40 44 46 48 52 54 56 60 62 Frequency 5180 5190 5200 5220 5230 5240 5260 5270 5280 5300 5310 (MHz) Scan Type Active Active Active Active Active Active Passive Passive Passive Passive Passive CH 64 100 102 104 108 110 112 116 118 120 124 Frequency 5320 5500 5510 5520 5540 5550 5560 5580 5590 5600 5620 (MHz) Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 126 128 132 134 136 140 149 151 153 157 159 Frequency 5630 5640 5660 5670 5680 5700 5745 5755 5765 5785 5795 (MHz) Scan Type Passive Passive Passive Passive Passive Passive Active Active Active Active Active CH 161 165 Frequency 5805 5825 (MHz) Scan Type Active Active

b). For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) or in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies), or modular devices that configure the modes of operations through software; the applicant must provide in the application software and operations description that discuss how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by an end user or an installer. Also, include an attestation that the device complies with the requirements for software configuration control as discussed in KDB #594280. On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS channels. As described in the answer to question a, the device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be changed or modified by end user. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ______________________ Daniel Lee Vice President Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 1857 Fax: 886-3-318 5050


Document Created: 2013-09-11 13:30:36
Document Modified: 2013-09-11 13:30:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC