Test Report - RF Exposure

FCC ID: NLB27212TX

Test Report

Download: PDF
FCCID_2710156

www.tuv.com Appendix 6 Prüfbericht - Nr.: 14040804 001 Seite 1 von 1 Test Report No.: Page 1 of 1 RF exposure Maximum transmitter power: Frequency Maximum peak output power Output power (MHz) (dBuV/m) (mW) 27.145 72.0 0.0048 According to KDB 447498 D01: At frequencies below 100 MHz, the following may be considered for SAR test exclusion: a) The power threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm b) The power threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Result: The SAR Exclusion Threshold Level for 27.145MHz when the minimum test separation distance is < 50mm: = [474 * (1 + log100/f(MHz))]/2 = 371.2mW Conclusion: No SAR is required.


Document Created: 2015-08-07 18:23:32
Document Modified: 2015-08-07 18:23:32
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC