Modular Approval Request_rev

FCC ID: NKRM18QF

Cover Letter(s)

Download: PDF
FCCID_4498836

FCC ID: NKRM18QF




             Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

                                                                  October 31, 2019

Dear Application Examiner,


Wistron NeWeb Corporation, M2M DATA MODULE, FCC ID: NKRM18QF would like
to have your authorization as a modular approval specific to the mobile RF exposure
condition.


The requirements of KDB996369 have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of
   this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
   has buffered data inputs, it is integrated in chip WTR2955.

3. “The modular transmitter must have its own power supply regulation.” The part
   number of this regulator is WTR2955.

4. “The modular transmitter must comply with the antenna requirements of section
   15.203 and 15.204(C).” This is a licensed device that used an SMA connector on
   test board (not applicable).

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
   was tested in a stand-alone configuration via a USB extender. Please see section
   Photographs of Test Configuration in the test report, the EUT was plugged in this
   extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
   see exhibition Label Sample for the FCC ID of this module. And also in the
   exhibition Users Manual, there are instructions give to the OEM on how to label
   the end product.


FCC ID: NKRM18QF




7. “The modular transmitter must comply with any specific rule or operating
   requirements applicable to the transmitter and the manufacturer must provide
   adequate instructions along with the module to explain any such requirements.”
   The EUT is compliant with all applicable FCC rules. Detail instructions for
   maintaining compliance are given in the Users Manual.



8. “The modular transmitter must comply with any applicable RF exposure
   requirements.” The EUT is compliant with all applicable RF exposure
   requirements. RF Exposure is addressed in the RF exposure exhibition.



Please contact me if you have any further questions. Thanks for your attention.




Best Regards,




Debby Lin, Senior Specialist
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Tel: 886-3-318 3232 ext. 1900
Fax: 886-3-327 0892
Email: debby.lin@tw.bureauveritas.com



Document Created: 2019-11-02 01:55:12
Document Modified: 2019-11-02 01:55:12

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC