RF Exposure Cal 1

FCC ID: NKRDRUCU3

RF Exposure Info

Download: PDF
FCCID_660978

NCL CALIBRATION LABORATORIES Calibration File No: DC—513 Project Number: WISB—ALSAS10U—5121 CERTIFICATE OF CALIBRATIO N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. WISB Validation Dipole Manufacturer: APREL Laboratories Part number: ALS—D—2450—5—2 Frequency: 2450 MHz Serial No: 2450—220—00753 Customer: WISB Calibrated: 4" March 2005 Released on: March 2005 7 Released By: l * s qJ U NCL CALIBRATION LABORATORIES 5t SPECTRUM WaY Division of APREL Lab. NEPEAN, ONTARIO Tel: (613) 820—4000 canaoa ker 12e Fav(613) e20—4162

NCL Calibration Laboratories Division of APREL Laboratories. Conditions Dipole 2450—220—00753 was new and taken from stock prior to calibration. Ambient Temperature of the Laboratory: 22 °C +/— 0.5°C Temperature of the Tissue: 21 °C +/ 0.5°C We the undersigned attest that to the best of our knowledge the calibration of this device has been accurately conducted and that all information contained within this report has been reviewed for accuracy. Stuart Nicol Director Product Development (Calibration Engineer) This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions Length: 51.5 mm Height: 30.4 mm Electrical Specification SWR: 1.01 U Return Loss: -45.3 dB Impedance: 50.6 Ω System Validation Results Frequency 1 Gram 10 Gram Peak 2450 MHz 53.09 24.44 101.85 3 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SSI-TP-018-ALSAS. The results contained within this report are for Validation Dipole 2450-220-00753. The calibration routine consisted of a three-step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Return loss were assessed. Step 3 involved a System Validation using the ALSAS-10U, along with APREL E-020 130 MHz to 26 GHz E-Field Probe Serial Number 212. References SSI-TP-018-ALSAS Dipole Calibration Procedure SSI-TP-016 Tissue Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” Conditions Dipole 2450-220-00753 was new taken from stock. Ambient Temperature of the Laboratory: 22 °C +/- 0.5°C Temperature of the Tissue: 20 °C +/- 0.5°C 4 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Dipole Calibration Results Mechanical Verification APREL APREL Measured Measured Length Height Length Height 51.5 mm 30.4 mm 52.1 mm 31.0 mm Tissue Validation Head Tissue 2450 MHz Measured Dielectric constant, εr 39.2 Conductivity, σ [S/m] 1.80 5 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Electrical Calibration Test Result S11 R/L -45.3 dB SWR 1.01 U Impedance 50.6 Ω The Following Graphs are the results as displayed on the Vector Network Analyzer. S11 Parameter Return Loss 6 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. SWR 7 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Smith Chart Dipole Impedance 8 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. System Validation Results Using the Electrically Calibrated Dipole Head Tissue 1 Gram 10 Gram Peak Frequency Above Feed Point 2450 MHz 53.09 24.44 101.85 9 This page has been reviewed for content and attested to by signature within this document.

NCL Calibration Laboratories Division of APREL Laboratories. Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server R:\NCL\Calibration Equipment\Instrument List May 2004 10 This page has been reviewed for content and attested to by signature within this document.

NCL CALIBRATION LABORATORIES Calbration File No: DC—514 Project Number: WISB—ALSAS10U—5121 CERTIFICATE OF CALIBRATION 1 s corif at e equimentidentfed below has beon caltrte i the wer cauimmamion LABORATORIES ty auaifed penonnefolowing recopniced procedurn and usng ranslrstandarts vaceable t NRCNIST wisg vaidaton Dpcle Mandachwec APREL Laboraties Parnumber ALs—0a200.82 Frequency 8200 ie soral No: sa0o.2z0.oonte Customer wise Ratcased on a0s t Roloased By: _ & aroreemaniy Comemetsertttas werou omine i rmam uon ranite P len oon

NCL Calibration Laboratories Divison of APREL Laborionic. Conditions Dipole 5200—230—00802 was new and taken from stock prior to calibration. Amblent Temperature of the Laboratory: 22 °C +0.5°C Temperature of the Tissue: 21 °C +40.5°C We the undersigned attest that to the best of our knowledge the calibration of this device has been accurately conducted and that all information contained within this report has beon reviewed for accuracy. Stuart Nicol Director Product Development l D. Brooks Member of Engineering Staff (Gallbration Engineer) "This page has beon reviewed fr conlenand atested o by signature witin hi document.

NCL Calibration Laboratories Divison of APREL Laboriones Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions 23.6 mm 14.0 mm Electrical Specification swe: 1180 Return Loss: 22.2 0B Impedance: seon System Validation Results Frequency 1 Gram 10 Gram | [S2zoo Mz 629 |_ 17.9 Area Scan Y Ais (om) oen aces asie X s (om) oan azr oz oo This page has been reviewed for contnt and atested to by signature wiin ths document

NCL Calibration Laboratories ‘Divisonof APREL Labormanes. Introduction This Caltbration Report has been produced in line with the SS! Dipole Calibration Procedure SS1—TP.018—ALSAS. The results contained within this report are for Validation Dipole 5200—230—00802. The calibration routine consisted of a three—step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electical Calioration for the Validation Dipole, where the SWR, Impedance, and the Retun loss were assessod. Step 3 involved a System Validation using the ALSAS—10U, along with APREL E—020 130 MHz to 26 GHz E—Field Probe Serial Number 212. References SSI—TP—018—ALSAS Dipole Calibration Procedure SSI—TP—016 Tissue Calibration Procedure IEEE 1528 *Recommended Practice for Determining the Peak Spatia—Average Specific Absorplion Rate (SAR) in the Human Body Due to Wireiess Communications Devices: Exporimental Techniques® Conditions Dipole 5200—230—00802 was new taken from stock. Amblent Temperature of the Laboratory: 22 °C +/—0.5°C Temporature of the Tissue: 20 °C +/—0.5°C "This page has been reviewed frcontentand atlsted o by signature witin hi document

NCL Calibration Laboratories Divison ofAPREL Labontars. Dipole Calibration Results Mechanical Verification APREL APREL Measured Measured Length Height Length Height 23.6 mm 14.0 mm 23.4 mm 15.4 mm TissueValidation Head Tissue 5200 MHz Measured Dielectric constant,& 353 Conductivity, o [Sim] 5.30 "This page has been reviewed for conlentand atlsted o by signature witin hi document

NCL Calibration Laboratories Divison of APREL Latorntons Electrical Callbration C Test Result S11 RL 248 _ SWR 1.16 U impedance seon The Following Graphs are the results as displayed on the Vector Network Analyzer. 511 Paramoter Return Loss see nevense neruecrion on a — s2e nerenence Puane uoe montrure »ner=—20.000 ab 1.o00 aB/01v 0.0000 m nenken 1 5.200000 Ofe —ee.i01 d wanken to nex »maken To iX 4 & maken nesoour s.connen oe s.sengee runcrions "This page has beon reviewed for contentand atlsted o by signature witin hidocument

NCL Calibration Laboratories Divisonof APREL Laboiones. swa see nevense nervecrion on o — see ferenence ruane sun »ner=1.350 0 se.000 »U/O1Y a.so00 maken 1 5.200000 oKz L164 U maken To nek »narker To iX mnken resoour s.coness olz 5.«oonee runcrions "This page has been reviewed forcontent and atlested t by signatire witin hidocument

NCL Calibration Laboratories Divisonof APREL Labornores Smith Chart Dipole Impedance sez nevense nervectton i mmeeomce iereiate fererence ruane 8.0000 w makes 1 5.200000 Oz 50.013 2 —3l067 jo nanker to mx »manker To NN mnker reoour s.oonme0 — 5.400000 ie runcrons "This page has beon reviewad fr content and atlsted o by signature witin thidocument


Document Created: 2006-05-19 16:13:04
Document Modified: 2006-05-19 16:13:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC