RF Exposure Info Test Rpt SAR Appendix A

FCC ID: NKRDRUA

RF Exposure Info

Download: PDF
FCCID_618598

APPENDIX A: TEST CONFIGURATIONS AND TEST DATA A1: TEST CONFIGURATION The bottom of the EUT to the flat phantom distance 6 mm A-1

The edge of the EUT to the flat phantom distance 5 mm A-2

EUT Photo Reference Point A-3

abpr corp.

Liquid Level Photo MSL 2450MHz D=151mm A-5

Date/Time: 2005/11/29 11:19:54 Test Laboratory: Advance Data Technology N800C-11b-Ch1-Mode 1 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.97 mho/m; εr = 50.9; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.866 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.30 V/m Peak SAR (extrapolated) = 1.95 W/kg SAR(1 g) = 0.792 mW/g; SAR(10 g) = 0.330 mW/g Maximum value of SAR (measured) = 0.915 mW/g A-6

Date/Time: 2005/11/29 11:37:29 Test Laboratory: Advance Data Technology N800C-11b-Ch6-Mode 1 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.872 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.26 V/m Peak SAR (extrapolated) = 2.03 W/kg SAR(1 g) = 0.812 mW/g; SAR(10 g) = 0.337 mW/g Maximum value of SAR (measured) = 0.913 mW/g A-7

1g/l0g Averaged SAR SAR; Zoom Sean:Vahe Along Z, X=3, Y=3 0.9 06 0.7 06 0.4 0.3 0.2 04 0.0 0.035

Date/Time: 2005/11/29 11:53:51 Test Laboratory: Advance Data Technology N800C-11b-Ch11-Mode 1 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2.05 mho/m; εr = 50.7; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.913 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.17 V/m Peak SAR (extrapolated) = 1.97 W/kg SAR(1 g) = 0.785 mW/g; SAR(10 g) = 0.327 mW/g Maximum value of SAR (measured) = 0.895 mW/g A-9

Date/Time: 2005/11/29 12:18:28 Test Laboratory: Advance Data Technology N800C-11g-Ch1-Mode 2 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.97 mho/m; εr = 50.9; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.536 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.19 V/m Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.479 mW/g; SAR(10 g) = 0.202 mW/g Maximum value of SAR (measured) = 0.544 mW/g A - 10

Date/Time: 2005/11/29 12:34:43 Test Laboratory: Advance Data Technology N800C-11g-Ch6-Mode 2 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.482 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.96 V/m Peak SAR (extrapolated) = 1.04 W/kg SAR(1 g) = 0.422 mW/g; SAR(10 g) = 0.177 mW/g Maximum value of SAR (measured) = 0.477 mW/g A - 11

Date/Time: 2005/11/29 12:50:58 Test Laboratory: Advance Data Technology N800C-11g-Ch11-Mode 2 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2.05 mho/m; εr = 50.7; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.461 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.87 V/m Peak SAR (extrapolated) = 1.05 W/kg SAR(1 g) = 0.426 mW/g; SAR(10 g) = 0.177 mW/g Maximum value of SAR (measured) = 0.481 mW/g A - 12

Date/Time: 2005/11/29 01:23:24 Test Laboratory: Advance Data Technology N800C-11g-Ch6 Turbo-Mode 2 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6 Turbo/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.514 mW/g Mid Channel 6 Turbo/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.46 V/m Peak SAR (extrapolated) = 1.13 W/kg SAR(1 g) = 0.483 mW/g; SAR(10 g) = 0.205 mW/g Maximum value of SAR (measured) = 0.547 mW/g A - 13

Date/Time: 2005/11/29 13:44:50 Test Laboratory: Advance Data Technology C600-11b-Ch1-Mode 3 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.97 mho/m; εr = 50.9; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.134 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.11 V/m Peak SAR (extrapolated) = 0.269 W/kg SAR(1 g) = 0.120 mW/g; SAR(10 g) = 0.063 mW/g Maximum value of SAR (measured) = 0.125 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.11 V/m Peak SAR (extrapolated) = 0.303 W/kg SAR(1 g) = 0.099 mW/g; SAR(10 g) = 0.054 mW/g Maximum value of SAR (measured) = 0.108 mW/g A - 14

Date/Time: 2005/11/29 14:12:56 Test Laboratory: Advance Data Technology C600-11b-Ch6-Mode 3 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.133 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.43 V/m Peak SAR (extrapolated) = 0.271 W/kg SAR(1 g) = 0.122 mW/g; SAR(10 g) = 0.064 mW/g Maximum value of SAR (measured) = 0.129 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.43 V/m Peak SAR (extrapolated) = 0.285 W/kg SAR(1 g) = 0.100 mW/g; SAR(10 g) = 0.054 mW/g Maximum value of SAR (measured) = 0.109 mW/g Date/Time: 2005/11/29 14:41:09 A - 15

Test Laboratory: Advance Data Technology C600-11b-Ch11-Mode 3 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2.05 mho/m; εr = 50.7; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.126 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.25 V/m Peak SAR (extrapolated) = 0.306 W/kg SAR(1 g) = 0.131 mW/g; SAR(10 g) = 0.067 mW/g Maximum value of SAR (measured) = 0.139 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.25 V/m Peak SAR (extrapolated) = 0.228 W/kg SAR(1 g) = 0.104 mW/g; SAR(10 g) = 0.051 mW/g Maximum value of SAR (measured) = 0.117 mW/g Date/Time: 2005/11/29 15:11:21 Test Laboratory: Advance Data Technology A - 16

C600-11g-Ch1-Mode 4 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.97 mho/m; εr = 50.9; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.082 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.84 V/m Peak SAR (extrapolated) = 0.191 W/kg SAR(1 g) = 0.078 mW/g; SAR(10 g) = 0.040 mW/g Maximum value of SAR (measured) = 0.085 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.84 V/m Peak SAR (extrapolated) = 0.178 W/kg SAR(1 g) = 0.063 mW/g; SAR(10 g) = 0.034 mW/g Maximum value of SAR (measured) = 0.067 mW/g Date/Time: 2005/11/29 15:38:58 Test Laboratory: Advance Data Technology A - 17

C600-11g-Ch6-Mode 4 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.074 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.52 V/m Peak SAR (extrapolated) = 0.163 W/kg SAR(1 g) = 0.068 mW/g; SAR(10 g) = 0.033 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.52 V/m Peak SAR (extrapolated) = 0.134 W/kg SAR(1 g) = 0.053 mW/g; SAR(10 g) = 0.026 mW/g Maximum value of SAR (measured) = 0.060 mW/g Date/Time: 2005/11/29 16:09:38 Test Laboratory: Advance Data Technology A - 18

C600-11g-Ch11-Mode 4 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2.05 mho/m; εr = 50.7; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.070 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.37 V/m Peak SAR (extrapolated) = 0.164 W/kg SAR(1 g) = 0.067 mW/g; SAR(10 g) = 0.032 mW/g Maximum value of SAR (measured) = 0.073 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.37 V/m Peak SAR (extrapolated) = 0.082 W/kg SAR(1 g) = 0.048 mW/g; SAR(10 g) = 0.025 mW/g Maximum value of SAR (measured) = 0.059 mW/g Date/Time: 2005/11/29 16:37:18 Test Laboratory: Advance Data Technology A - 19

C600-11g-Ch6 Turbo-Mode 4 DUT: WLAN 802.11G USB ADAPTER ; Type: DRUA ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 2.01 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6 Turbo/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.094 mW/g Mid Channel 6 Turbo/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.38 V/m Peak SAR (extrapolated) = 0.214 W/kg SAR(1 g) = 0.086 mW/g; SAR(10 g) = 0.044 mW/g Maximum value of SAR (measured) = 0.092 mW/g Mid Channel 6 Turbo/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.38 V/m Peak SAR (extrapolated) = 0.195 W/kg SAR(1 g) = 0.068 mW/g; SAR(10 g) = 0.036 mW/g Maximum value of SAR (measured) = 0.072 mW/g Date/Time: 2005/11/29 10:46:44 Test Laboratory: Advance Data Technology A - 20

System Validation Check-MSL 2450MHz DUT: Dipole 2450 MHz ; Type: D2450V2 ; Serial: 737 ; Test Frequency: 2450 MHz Communication System: CW ; Frequency: 2450 MHz; Duty Cycle: 1:1; Modulation type: CW Medium: MSL2450;Medium parameters used: f = 2450 MHz; σ = 2.03 mho/m; εr = 50.8; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 10 mm (The feetpoint of the dipole to the Phantom)Air temp. : 22.1 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23; Postprocessing SW: SEMCAD, V1.8 Build 160 d=10mm, Pin=250mW/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 14.6 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.0 V/m; Power Drift = -0.052 dB Peak SAR (extrapolated) = 28.7 W/kg SAR(1 g) = 13.1 mW/g; SAR(10 g) = 5.99 mW/g Maximum value of SAR (measured) = 14.8 mW/g A - 21


Document Created: 2006-01-10 11:33:33
Document Modified: 2006-01-10 11:33:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC