MPE

FCC ID: NKRDAXA-GO1

RF Exposure Info

Download: PDF
FCCID_3199824

FCC RF Exposure Report FCC ID : NKRDAXA-GO1 Equipment : 802.11ac 3*3 PCIe module Model No. : DAXA-GO1 Brand Name : WNC Applicant : Wistron NeWeb Corporation Address : 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan,R.O.C. Standard : 47 CFR FCC Part 2.1091 Received Date : Mar. 02, 2016 Tested Date : Mar. 07 ~ Oct. 24, 2016 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA421702-1 Page : 1 of 6 Report Version: Rev. 01

Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 MPE EVALUATION RESULTS .............................................................................................................. 4 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA421702-1 Page : 2 of 6 Report Version: Rev. 01

Release Record Report No. Version Description Issued Date FA421702-1 Rev. 01 Initial issue Nov. 16, 2016 Report No.: FA421702-1 Page : 3 of 6 Report Version: Rev. 01

1 MPE EVALUATION OF MOBILE DEVICES Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE 2 Frequency Range (MHz) Power Density (mW /cm ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pt Pd = 4 * Pi * R 2 Where 2 Pd= Power density in mW/cm Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 1.3 MPE EVALUATION RESULTS Maximum Frequency Antenna Gain Distance Power Density 2 Conducted 2 Limit (mW/cm ) Range (MHz) (dBi) (cm) (mW/cm ) Power (dBm) 5180~5240 28.21 4.16 20 0.343 1 5745~5825 26.34 4.20 20 0.225 1 Report No.: FA421702-1 Page : 4 of 6 Report Version: Rev. 01

1.4 SIMULTANEOUS TRANSMISSION MPE EVALUATION RESULTS The EUT will be installed in below host Antenna Gain (dBi) Antenna Ant. Brand Name Model Name Product Name 2400~2483.5 5150~5250 5725-5850 type No. (MHz) (MHz) (MHz) 1 for 2.4G 2.19 - - 2 for 2.4G 3.33 - - GFRG200 3 for 2.4G 4.21 - - Google Platform Printed GFRG210 1 for 5G - 3.88 4.20 2 for 5G - 2.62 4.02 3 for 5G - 4.16 3.43 Note: Above hosts contain FCC ID: NKRDAXA-GO1 (EUT) and FCC ID: NKRDNXA-GO1 Evaluation result of FCC ID: NKRDNXA-GO1 (EUT) Maximum Frequency Antenna Gain Distance Power Density 2 Conducted 2 Limit (mW/cm ) Range (MHz) (dBi) (cm) (mW/cm ) Power (dBm) 2412~2462 28.44 4.21 20 0.366 1 MPE Evaluation of Simultaneous Transmission 2.4 and 5GHz can transmit at the same time, MPE evaluation is as below formula PD1 / Limit1 + PD2 / Limit 2 + ….. < 1, PD = Power density MPE Evaluation = Maximum MPE of 2.4GHz + Maximum MPE of 5 GHz = 0.366 / 1 + 0.343 / 1 = 0.709 < 1 Conclusion MPE evaluations of single and simultaneous transmission meet the requirement of standard. Report No.: FA421702-1 Page : 5 of 6 Report Version: Rev. 01

C Infernational Certification Corp. 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin No. 3—1, Lane 6, Wen San 3rd St, No. 14—1, Lane 19, Wen San 3rd Kou District, New Taipei City, Kwei Shan District, Tao Yuan City St., Kwei Shan District, Tao Yuan Taiwan, R.0.C. 333, Taiwan, R.0.C. City 333, Taiwan, R.O.C.. If you have any suggestion, please feel free to contact us as below information Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END= Report No.: FA421702—1 Page : 6 of 6 Report Version: Rev. 01


Document Created: 2017-12-17 23:23:48
Document Modified: 2017-12-17 23:23:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC