Test Report (DTS-WLAN) Spot check

FCC ID: NKR-WNCJS8T

Test Report

Download: PDF
FCCID_4410692

FCC Test Report (WLAN) (Spot Check) Report No.: RF190603E08 FCC ID: NKR-WNCJS8T Original FCC ID: NKR-VZJS8V Test Model: JS8T Received Date: June 03, 2019 Test Date: June 28 to July 05, 2019 Issued Date: Aug. 20, 2019 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190603E08 Page No. 1 / 32 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Emission Measurement .................................................................................................. 25 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 25 4.2.2 Test Instruments ................................................................................................................................ 25 4.2.3 Test Procedures ................................................................................................................................. 26 4.2.4 Deviation from Test Standard ............................................................................................................ 26 4.2.5 Test Setup .......................................................................................................................................... 26 4.2.6 EUT Operating Conditions................................................................................................................. 26 4.2.7 Test Results ....................................................................................................................................... 27 4.3 Conducted Output Power Measurement ........................................................................................... 29 4.3.1 Limits of Conducted Output Power Measurement ............................................................................ 29 4.3.2 Test Setup .......................................................................................................................................... 29 4.3.3 Test Instruments ................................................................................................................................ 29 4.3.4 Test Procedures ................................................................................................................................. 29 4.3.5 Deviation from Test Standard ............................................................................................................ 29 4.3.6 EUT Operating Conditions................................................................................................................. 29 4.3.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 31 Appendix – Information of the Testing Laboratories ................................................................................. 32 Report No.: RF190603E08 Page No. 2 / 32 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190603E08 Original release. Aug. 20, 2019 Report No.: RF190603E08 Page No. 3 / 32 Report Format Version: 6.1.1

1 Certificate of Conformity Product: OTT BOX Brand: WNC Test Model: JS8T Status of EUT ENGINEERING SAMPLE Applicant: Wistron NeWeb Corp. Test Date: June 28 to July 05, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 20, 2019 Wendy Wu / Specialist Approved by : , Date: Aug. 20, 2019 May Chen / Manager Report No.: RF190603E08 Page No. 4 / 32 Report Format Version: 6.1.1

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is 12.920B at 26.60938 MHz. 15.205 / ; Radiated leai Emissions and Band Edge Meet the requirement of limit. 15.209 / ‘ M:aaéurement 9 PASS Minimum passing margin is —0.30B at 15.247(d) 2483.50MHz 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency Expanc:igzl)Jrgfs uy Conducted Emissions at mains ports 150kHz ~ 30MHz 1.8 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.1 dB 1GHz ~ 6GHz 5.1 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 5.0 dB 18GHz ~ 40GHz 5.2 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190603E08 Page No. 5 / 32 Report Format Version: 6.1.1

Eooert venitas 3 General Information 3.1 General Description of EUT Product OTT BOX Brand WNC Test Model JSBT Status of EUT ENGINEERING SAMPLE Power Supply Rating 12Vdc from power adapter CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode and VHT (20/40) mode in 2.4GHz Modulation Technology DSSS, OFDM 802.11b:; up to 11Mbps 802.11a/g: up to 54Mbps Transfer Rate 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps 24GHz: 2.412 ~ 2. 462GHz Operating Frequency 5GHz: 5.18~ 5.24GHz, 5.26GHz ~ 5.32GHz, 5.50GHz ~ 5.72GHz, 5.745 ~ 5.825GHz 2 4GHz: 802.11b, 802.11g, 802.11n (HT20), VHT20: 11 802.11n (HT40), VHT4O: 7 Number of Channel 5GHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 25 802.11n (HT40), 802. 11ac (VHT40): 12 802.11ac (VHT80): 6 2 4GHz: 641.636 mW 5.18 ~ 5.24GHz: 247.256 mW Output Power 5.26 ~ 5.32GHz: 211.137 mW 5.5 ~ 5.72GHz: 205.4 mW 5.745 ~ 5.825GHz: 402.91 mW Antenna Type Refer to Note Antenna Connector Refer to Note Adapter x1 Accessory Device Remote controller x 1 (Brand: NA, Model: RC3441530/01BR) Data Cable Supplied HDMI cable x 1 (Shielded, 1.2m) Note: 1. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot—check test data are decided by applicant‘s engineering judgment, for more details please refer to declaration letter exhibit. 2. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz Bluetooth 2 WLAN 5GHz Bluetooth Note: The emission of the simultaneous operation has been evaluated and no non—compliance was found. Report No.: RF190603E08 Page No. 6 / 32 Report Format Version: 6.1.1

3. The EUT needs to be supplied from power adapter, the information is as below table: Brand Model No. Spec. Input: 100-240Vac, 0.3A, 50/60Hz Frecom F12L33-120100SPAU Output: 12V, 1A DC Output cable: Unshielded, 1.5m 4. The antennas provided to the EUT, please refer to the following table: WLAN Antenna Net Gain Frequency range Chain No. Antenna type Connector type (dBi) (GHz) 3.62 2.4~2.4835 3.57 5.15~5.25 Chain 0 3.63 5.25~5.35 On board printed antenna none 2.50 5.47~5.725 2.88 5.725~5.85 5.36 2.4~2.4835 3.26 5.15~5.25 Chain 1 3.26 5.25~5.35 On board printed antenna none 3.75 5.47~5.725 4.22 5.725~5.85 Bluetooth Frequency range Antenna Net Gain (dBi) Antenna type Connector type (GHz) 2.39 2.4~2.4835 On board printed antenna none 5. The EUT incorporates a MIMO function. 2.4GHz Band MODULATION MODE TX & RX CONFIGURATION 802.11b 2TX 2RX 802.11g 2TX 2RX 802.11n (HT20) 2TX 2RX 802.11n (HT40) 2TX 2RX VHT20 2TX 2RX VHT40 2TX 2RX 5GHz Band MODULATION MODE TX & RX CONFIGURATION 802.11a 2TX 2RX 802.11n (HT20) 2TX 2RX 802.11n (HT40) 2TX 2RX 802.11ac (VHT20) 2TX 2RX 802.11ac (VHT40) 2TX 2RX 802.11ac (VHT80) 2TX 2RX Note: The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac mode for 20MHz (40MHz), therefore investigated worst case to representative mode in test report. 6. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or user's manual. Report No.: RF190603E08 Page No. 7 / 32 Report Format Version: 6.1.1

3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g, 802.11n (HT20), VHT20: Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40), VHT40: Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz Report No.: RF190603E08 Page No. 8 / 32 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM - √ √ √ √ - RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: 1. The EUT had been pre-tested on the positioned of each 2 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION Data Rate MODE CHANNEL CHANNEL TECHNOLOGY TYPE Parameter 802.11g 1 to 11 6 OFDM BPSK 6 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION Data Rate MODE CHANNEL CHANNEL TECHNOLOGY TYPE Parameter 802.11g 1 to 11 6 OFDM BPSK 6 Antenna Port Conducted Measurement: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6 Report No.: RF190603E08 Page No. 9 / 32 Report Format Version: 6.1.1

Test Condition: Applicable To Environmental Conditions Input Power Tested By RE1G 22deg. C, 66%RH 120Vac, 60Hz Robert Cheng RE<1G 22deg. C, 66%RH 120Vac, 60Hz Robert Cheng PLC 24deg. C, 74%RH 120Vac, 60Hz Andy Ho APCM 25deg. C, 60%RH 120Vac, 60Hz Jyunchun Lin Report No.: RF190603E08 Page No. 10 / 32 Report Format Version: 6.1.1

3.3 Duty Cycle of Test Signal Duty cycle of test signal is 100 %, duty factor is not required. 802.11g Report No.: RF190603E08 Page No. 11 / 32 Report Format Version: 6.1.1

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Monitor ASUS VN248 NA NA Provided by Lab B. iPod Apple MC749TA/A CC4DN25WDFDM NA Provided by Lab C. D/A Audio Converter LINDY NA NA NA Provided by Lab D. Speaker Lenovo 41A5330 NA NA Provided by Lab E. Laptop DELL E6420 B92T3R1 FCC DoC Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. DC Cable 1 1.5 No 0 Supplied by client 2. HDMI Cable 1 1.2 Yes 0 Supplied by client 3. USB Cable 1 0.1 Yes 0 Provided by Lab 4. Fiber Cable 1 1.5 No 0 Provided by Lab 5. Audio Cable 1 0.2 No 0 Provided by Lab 6. Audio Cable 1 1.5 No 0 Provided by Lab 7. RJ-45 Cable 1 10 No 0 Provided by Lab Report No.: RF190603E08 Page No. 12 / 32 Report Format Version: 6.1.1

3.4.1 Configuration of System under Test Report No.: RF190603E08 Page No. 13 / 32 Report Format Version: 6.1.1

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r02 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190603E08 Page No. 14 / 32 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF190603E08 Page No. 15 / 32 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010156 July 12, 2018 July 11, 2019 Agilent Pre-Amplifier EMC001340 980142 Jan. 25, 2019 Jan. 24, 2020 EMCI Loop Antenna EM-6879 269 Sep. 07, 2018 Sep. 06, 2019 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 14, 2019 Jan. 13, 2020 RF Cable NA LOOPCAB-002 Jan. 14, 2019 Jan. 13, 2020 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-05 Apr. 30, 2019 Apr. 29, 2020 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-361 Nov. 22, 2018 Nov. 21, 2019 SCHWARZBECK RF Cable 8D 966-3-1 Mar. 18, 2019 Mar. 17, 2020 RF Cable 8D 966-3-2 Mar. 18, 2019 Mar. 17, 2020 RF Cable 8D 966-3-3 Mar. 18, 2019 Mar. 17, 2020 Fixed attenuator UNAT-5+ PAD-3m-3-01 Sep. 27, 2018 Sep. 26, 2019 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Jan. 28, 2019 Jan. 27, 2020 EMCI RF Cable EMC104-SM-SM-1200 160922 Jan. 28, 2019 Jan. 27, 2020 RF Cable EMC104-SM-SM-2000 180601 June 10, 2019 June 09, 2020 RF Cable EMC104-SM-SM-6000 180602 June 10, 2019 June 09, 2020 Spectrum Analyzer N9030A MY54490679 July 23, 2018 July 22, 2019 Keysight Pre-Amplifier EMC184045SE 980387 Jan. 28, 2019 Jan. 27, 2020 EMCI Horn_Antenna BBHA 9170 BBHA9170519 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160924 Jan. 28, 2019 Jan. 27, 2020 RF Cable EMC102-KM-KM-1200 160925 Jan. 28, 2019 Jan. 27, 2020 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Spectrum Analyzer FSV40 100964 June 04, 2019 June 03, 2020 R&S Power meter ML2495A 1014008 May 13, 2019 May 12, 2020 Anritsu Power sensor MA2411B 0917122 May 13, 2019 May 12, 2020 Anritsu Fixed Attenuator MDCS18N-10 MDCS18N-10-01 Apr. 15, 2019 Apr. 14, 2020 Mini-Circuits Note: power 7/5 LB 6/28 HB 6/29 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 966 Chamber No. 3. 3. Loop antenna was used for all emissions below 30 MHz. 4. Tested Date: June 28 to July 05, 2019 Report No.: RF190603E08 Page No. 16 / 32 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190603E08 Page No. 17 / 32 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190603E08 Page No. 18 / 32 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Controlling software (HyperTerminal paste command) has been activated to set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190603E08 Page No. 19 / 32 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz Data: 802.11g CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 73.3 PK 74.0 -0.7 2.10 H 187 75.3 -2.0 2 2390.00 53.1 AV 54.0 -0.9 2.10 H 187 55.1 -2.0 3 *2412.00 112.3 PK 2.10 H 187 114.3 -2.0 4 *2412.00 103.3 AV 2.10 H 187 105.3 -2.0 5 4824.00 36.8 PK 74.0 -37.2 1.30 H 310 34.5 2.3 6 4824.00 23.7 AV 54.0 -30.3 1.30 H 310 21.4 2.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 68.7 PK 74.0 -5.3 2.89 V 196 70.7 -2.0 2 2390.00 48.2 AV 54.0 -5.8 2.89 V 196 50.2 -2.0 3 *2412.00 106.6 PK 2.89 V 196 108.6 -2.0 4 *2412.00 97.4 AV 2.89 V 196 99.4 -2.0 5 4824.00 36.6 PK 74.0 -37.4 2.16 V 159 34.3 2.3 6 4824.00 24.1 AV 54.0 -29.9 2.16 V 159 21.8 2.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190603E08 Page No. 20 / 32 Report Format Version: 6.1.1

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 118.5 PK 1.37 H 184 120.6 -2.1 2 *2437.00 108.5 AV 1.37 H 184 110.6 -2.1 3 4874.00 37.9 PK 74.0 -36.1 1.61 H 215 35.6 2.3 4 4874.00 24.5 AV 54.0 -29.5 1.61 H 215 22.2 2.3 5 7311.00 41.8 PK 74.0 -32.2 1.54 H 312 33.5 8.3 6 7311.00 29.1 AV 54.0 -24.9 1.54 H 312 20.8 8.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 113.6 PK 2.80 V 187 115.7 -2.1 2 *2437.00 103.9 AV 2.80 V 187 106.0 -2.1 3 4874.00 38.3 PK 74.0 -35.7 2.06 V 167 36.0 2.3 4 4874.00 24.8 AV 54.0 -29.2 2.06 V 167 22.5 2.3 5 7311.00 41.5 PK 74.0 -32.5 3.01 V 191 33.2 8.3 6 7311.00 28.5 AV 54.0 -25.5 3.01 V 191 20.2 8.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190603E08 Page No. 21 / 32 Report Format Version: 6.1.1

CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 113.2 PK 1.00 H 196 115.4 -2.2 2 *2462.00 103.0 AV 1.00 H 196 105.2 -2.2 3 2483.50 72.6 PK 74.0 -1.4 1.00 H 196 74.8 -2.2 4 2483.50 53.7 AV 54.0 -0.3 1.00 H 196 55.9 -2.2 5 4924.00 36.7 PK 74.0 -37.3 1.36 H 144 34.2 2.5 6 4924.00 23.7 AV 54.0 -30.3 1.36 H 144 21.2 2.5 7 7386.00 41.7 PK 74.0 -32.3 1.39 H 308 33.4 8.3 8 7386.00 28.7 AV 54.0 -25.3 1.39 H 308 20.4 8.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 108.0 PK 2.82 V 187 110.2 -2.2 2 *2462.00 97.8 AV 2.82 V 187 100.0 -2.2 3 2483.50 68.5 PK 74.0 -5.5 2.82 V 187 70.7 -2.2 4 2483.50 48.9 AV 54.0 -5.1 2.82 V 187 51.1 -2.2 5 4924.00 37.2 PK 74.0 -36.8 2.11 V 150 34.7 2.5 6 4924.00 24.2 AV 54.0 -29.8 2.11 V 150 21.7 2.5 7 7386.00 41.1 PK 74.0 -32.9 2.98 V 196 32.8 8.3 8 7386.00 28.2 AV 54.0 -25.8 2.98 V 196 19.9 8.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190603E08 Page No. 22 / 32 Report Format Version: 6.1.1

Below 1GHz Data: 802.11g CHANNEL TX Channel 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 56.80 28.2 QP 40.0 -11.8 1.47 H 88 41.9 -13.7 2 90.38 30.1 QP 43.5 -13.4 1.36 H 67 48.4 -18.3 3 104.67 35.2 QP 43.5 -8.3 1.89 H 25 51.6 -16.4 4 210.08 32.1 QP 43.5 -11.4 1.50 H 58 47.1 -15.0 5 304.83 38.1 QP 46.0 -7.9 1.00 H 360 49.6 -11.5 6 592.99 39.9 QP 46.0 -6.1 1.50 H 308 44.5 -4.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190603E08 Page No. 23 / 32 Report Format Version: 6.1.1

CHANNEL TX Channel 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 90.11 37.1 QP 43.5 -6.4 1.42 V 65 55.4 -18.3 2 104.35 36.9 QP 43.5 -6.6 1.35 V 311 53.3 -16.4 3 444.75 40.4 QP 46.0 -5.6 1.41 V 100 48.4 -8.0 4 593.21 39.4 QP 46.0 -6.6 1.41 V 189 44.0 -4.6 5 738.20 32.6 QP 46.0 -13.4 1.52 V 302 34.5 -1.9 6 840.20 38.2 QP 46.0 -7.8 1.65 V 302 38.2 0.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190603E08 Page No. 24 / 32 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Oct. 24, 2018 Oct. 23, 2019 R&S Line-Impedance Stabilization Network ESH3-Z5 848773/004 Oct. 22, 2018 Oct. 21, 2019 (for EUT) R&S Line-Impedance Stabilization Network ESH3-Z5 835239/001 Mar. 17, 2019 Mar. 16, 2020 (for Peripheral) R&S 50 ohms Terminator N/A 3 Oct. 22, 2018 Oct. 21, 2019 RF Cable 5D-FB COCCAB-001 Sep. 28, 2018 Sep. 27, 2019 Fixed attenuator STI02-2200-10 003 Mar. 14, 2019 Mar. 13, 2020 EMCI Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3 Tested Date: July 04, 2019 Report No.: RF190603E08 Page No. 25 / 32 Report Format Version: 6.1.1

uces venitas 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit — 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi—peak detection (QP) and average detection (AV) at frequency 0.15MHz—30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane / Test Receiver <a———m L____] © o o o 40cm EUT __ E*~~l 0 s o o 80cm |LISN L L1 L IN 1— \ Horizontal Ground Referen Plane ce Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF190603E08 Page No. 26 / 32 Report Format Version: 6.1.1

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.03 31.21 17.22 41.24 27.25 66.00 56.00 -24.76 -28.75 2 0.18125 10.04 27.43 14.03 37.47 24.07 64.43 54.43 -26.96 -30.36 3 0.43906 10.08 23.20 18.75 33.28 28.83 57.08 47.08 -23.80 -18.25 4 9.05859 10.64 17.06 9.55 27.70 20.19 60.00 50.00 -32.30 -29.81 5 23.12891 11.43 28.85 24.84 40.28 36.27 60.00 50.00 -19.72 -13.73 6 26.60938 11.52 29.55 25.56 41.07 37.08 60.00 50.00 -18.93 -12.92 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF190603E08 Page No. 27 / 32 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.94 30.32 16.67 40.26 26.61 66.00 56.00 -25.74 -29.39 2 0.18516 9.95 26.21 12.51 36.16 22.46 64.25 54.25 -28.09 -31.79 3 0.43516 9.98 21.79 17.98 31.77 27.96 57.15 47.15 -25.38 -19.19 4 9.39063 10.49 16.19 8.74 26.68 19.23 60.00 50.00 -33.32 -30.77 5 23.12891 11.19 26.24 22.23 37.43 33.42 60.00 50.00 -22.57 -16.58 6 26.60938 11.25 27.36 22.70 38.61 33.95 60.00 50.00 -21.39 -16.05 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF190603E08 Page No. 28 / 32 Report Format Version: 6.1.1

4.3 Conducted Output Power Measurement 4.3.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4; Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT; Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT ≥ 5. For power measurements on all other devices: Array Gain = 10 log(N ANT/NSS) dB. 4.3.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. . 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190603E08 Page No. 29 / 32 Report Format Version: 6.1.1

4.3.7 Test Results FOR PEAK POWER 802.11g Peak Power (dBm) Total Total Freq. Limit Chan. Power Power Pass / Fail (MHz) (dBm) Chain 0 Chain 1 (mW) (dBm) 1 2412 25.21 24.31 601.668 27.79 30.00 Pass 6 2437 25.21 24.91 641.636 28.07 30.00 Pass 11 2462 25.24 24.62 623.929 27.95 30.00 Pass FOR AVERAGE POWER 802.11g Frequency Avg. Power (dBm) Total Power Total Power Chan. (MHz) (mW) (dBm) Chain 0 Chain 1 1 2412 18.22 17.35 120.699 20.82 6 2437 19.96 19.58 189.865 22.78 11 2462 18.26 17.51 123.352 20.91 Report No.: RF190603E08 Page No. 30 / 32 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190603E08 Page No. 31 / 32 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190603E08 Page No. 32 / 32 Report Format Version: 6.1.1


Document Created: 2019-08-25 09:41:44
Document Modified: 2019-08-25 09:41:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC