Declaration letter for DFS client

FCC ID: NKR-P75B

Cover Letter(s)

Download: PDF
FCCID_2427774

Date : October 20, 2014
                                                                UNII Declaration Letter

We have declared below featured for FCC equipment authorization, Device FCC ID: NKR-P75B

    (1) DFS Device --            Client with Radar detection capability ,
                                 Client without radar detection capability

    (2) Active / Passive Scanning , Ad hoc mode access point capability
            Frequency Band            Active Scanning         passive scanning                                 Ad Hoc Mode                 Access point
                  (MHz)                (the device can      (where the device is                                 capability                 capability
                                      transmit a probe     can listen only with no
                                          (beacon))                probes)
              5150 – 5250                  Yes ,    No             Yes ,    No                                    Yes ,       No             Yes ,       No
              5250 – 5350                  Yes ,    No             Yes ,    No                                    Yes ,       No             Yes ,       No
              5470 – 5725                  Yes ,    No             Yes ,    No                                    Yes ,       No             Yes ,       No
              5725 – 5850                  Yes ,    No             Yes ,    No                                    Yes ,       No             Yes ,       No

    (3) Country code selection ability -  Yes ,                  No
        If no, pls explain how was implemented :

    (4) Meet 15.202 requirement -        Yes ,      No ,
        pls check below :
        A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master.
        A device in client mode is not able to initiate a network.

    (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive
        scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or
        modular devices which configure the modes of operations through software, the application must provide software and operations
        description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by
        end user or an installer.
            Apply ,     No Apply ,
         (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled)

         On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS channels. As
         described in the answer to question (2), the device passively scans DFS frequencies until a master device is detected. The control of this functionality is not
         accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be changed or modified by end user.



        Applicant                        : Wistron NeWeb Corporation

                                             20 Park Avenue II, Hsinchu Science Park, Hsinchu
        Address                          :
                                             308,Taiwan,R.O.C.



        Signature                        :

                                             _________________________________

        Name and Job Title.              : Alan Wang /Senior Engineer



Document Created: 2019-09-21 06:38:05
Document Modified: 2019-09-21 06:38:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC