Test Report 15B_rev

FCC ID: NKR-LVSK-P1

Test Report

Download: PDF
FCCID_4389771

FCC Test Report Report No.: FD190606E05 FCC ID: NKR-LVSK-P1 Test Model: LVP1 Received Date: June 06, 2019 Test Date: July 05, 2019 Issued Date: July 31, 2019 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (1): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. FCC Registration / 810758 / TW1085 for Test Location (1) Designation Number: 960022 / TW1058 for Test Location (2) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: FD190606E05 Page No. 1 / 27 Report Format Version: 6.1.2

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ......................................................................................................................... 4 2 Summary of Test Results......................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information ................................................................................................................................. 6 3.1 Description of EUT .............................................................................................................................. 6 3.2 Features of EUT .................................................................................................................................. 6 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 7 3.4 Test Program Used and Operation Descriptions ................................................................................. 7 3.5 Primary Clock Frequencies of Internal Source ................................................................................... 7 4 Configuration and Connections with EUT ............................................................................................. 8 4.1 Connection Diagram of EUT and Peripheral Devices ......................................................................... 8 4.2 Configuration of Peripheral Devices and Cable Connections ............................................................. 9 5 Conducted Emissions at Mains Ports .................................................................................................. 10 5.1 Limits ................................................................................................................................................. 10 5.2 Test Instruments ................................................................................................................................ 10 5.3 Test Arrangement ............................................................................................................................... 11 5.4 Supplementary Information ................................................................................................................ 11 5.5 Test Results ....................................................................................................................................... 12 6 Radiated Emissions up to 1 GHz .......................................................................................................... 14 6.1 Limits ................................................................................................................................................. 14 6.2 Test Instruments ................................................................................................................................ 15 6.3 Test Arrangement .............................................................................................................................. 16 6.4 Supplementary Information ............................................................................................................... 16 6.5 Test Results ....................................................................................................................................... 17 7 Radiated Emissions above 1 GHz......................................................................................................... 19 7.1 Limits ................................................................................................................................................. 19 7.2 Test Instruments ................................................................................................................................ 20 7.3 Test Arrangement .............................................................................................................................. 21 7.4 Supplementary Information ............................................................................................................... 21 7.5 Test Results ....................................................................................................................................... 22 8 Pictures of Test Arrangements ............................................................................................................. 24 8.1 Conducted Emission from the AC Mains Power Port ........................................................................ 24 8.2 Radiated Emissions up to 1 GHz ...................................................................................................... 25 8.3 Radiated Emissions above 1 GHz .................................................................................................... 26 Appendix – Information of the Testing Laboratories ................................................................................. 27 Report No.: FD190606E05 Page No. 2 / 27 Report Format Version: 6.1.2

Release Control Record Issue No. Description Date Issued FD190606E05 Original release. July 31, 2019 Report No.: FD190606E05 Page No. 3 / 27 Report Format Version: 6.1.2

1 Certificate of Conformity Product: Home Phone Base Brand: WNC Test Model: LVP1 Sample Status: ENGINEERING SAMPLE Applicant: Wistron NeWeb Corp. Test Date: July 05, 2019 Standards: 47 CFR FCC Part 15, Subpart B, Class B ICES-003:2016 Issue 6, updated Apr. 2019, Class B ANSI C63.4:2014 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: July 31, 2019 Claire Kuan / Specialist Approved by : , Date: July 31, 2019 Ken Lu / Manager Report No.: FD190606E05 Page No. 4 / 27 Report Format Version: 6.1.2

s coryl (%4 ced 2 Summary of Test Results 47 CFR FCC Part 15, Subpart B / ICES—003:2016 Issue 6, updated Apr. 2019, Class B ANSI C63.4:2014 (uS SEsces Test Item Result/Remarks Verdict Clause Clause AC Power Line Conducted Minimum passing Class B margin is 15107 61 emissions —8.78 dB at 0.47031 MHz Pass 6.21 Radiated Emissions up to 1 Minimum passing Class B margin is Pase "C GHz ~4.59 dB at 191.00 MHz 15.109 — —— — — — 6.2.2 Radiated Emissions above 1| Minimum passing Class B margin is Pass "C GHz —8.37 dB at 7132.75 MHz Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: Measurement Frequency Expand(igzl)JerE)ertamty Conducted Emissions at mains ports 150kHz ~ 30MHz 1.8 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.1 dB 1GHz ~ 6GHz 5.1 dB Radi adiated Emissi Emissions above 1 GHz GH 6GHz — 18GHz 48 ap 2.2 Modification Record There were no modifications required for compliance. Report No.: FD190606E05 Page No. 5 / 27 Report Format Version: 6.1.2

3 General Information 3.1 Description of EUT Product Home Phone Base Brand WNC Test Model LVP1 Sample Status ENGINEERING SAMPLE Operating Software NA DC 5V from power adapter or Power Supply Rating DC 3.6V from battery Accessory Device NA Data Cable Supplied USB cable x 1 (Shielded, 1m) Note: 1. The EUT needs to be supplied from power adapter or battery, the information is as below table: Adapter Brand Model No. Spec. Input: 100-240Vac, 0.4A, 50/60Hz Lucent Trans 1A52-US0502 Output: 5V, 2A Battery Brand Model No. Spec. WNC BTY-LRV5000 DC 3.6V, 2330mAh 2. The antennas provided to the EUT, please refer to the following table: Antenna Antenna RF Chain Antenna Connector *Cable Brand Net Frequency range NO. NO. Type Type Length Gain(dBi) LTE Main Chain0 WNC 3.11 FDD 2: US(1850 -1910) PIFA i-pex(MHF) No FDD 4: US LTE Main Chain0 WNC 2 PIFA i-pex(MHF) No (T-Mobile)(1710-1755MHz) LTE Main Chain0 WNC 0.9 FDD 5: US(824-849) PIFA i-pex(MHF) No FDD 13: US LTE Main Chain0 WNC 1.25 PIFA i-pex(MHF) No (Verizon)(777-787MHz) LTE Aux Chain1 WNC 3.85 FDD 2: US(1850 -1910) PIFA NA No FDD 4: US LTE Aux Chain1 WNC 2.84 PIFA NA No (T-Mobile)(1710-1755MHz) LTE Aux Chain1 WNC 1.14 FDD 5: US(824-849) PIFA NA No FDD 13: US LTE Aux Chain1 WNC 1.16 PIFA NA No (Verizon)(777-787MHz) GPS Chain0 WNC 5.55 GPS(1575.42MHz) PCB i-pex(MHF) 80mm 3.2 Features of EUT The tests reported herein were performed according to the method specified by Wistron NeWeb Corp., for detailed feature description, please refer to the manufacturer's specifications or user's manual. Report No.: FD190606E05 Page No. 6 / 27 Report Format Version: 6.1.2

coryl (%) ezs pmnsnm 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode For radiated emission test, the EUT has been pre—tested under following test modes, and test mode A was the worst case for final test. Test condition Mode Radiated emission test Power Input Power Source Mode A AC 120V/60Hz 1A52—US0502 GPS+—LTE B DC 3.6V Battery GPSA—LTE NOTE: The test configurations are defined by the applicant requirement. Test mode is presented in the report as below. Mode Test Condition Power Input Power Source Mode 1 AC 120V/60H2z 1A52—US0502 GPSA—LTE 3.4 Test Program Used and Operation Descriptions Turn on the power of all equipment. N — Support units B (Signalling Tester MD8475A) link with EUT via LTE. 3 Support units C (GPS simulator) link with EUT via GPS. 3.5 Primary Clock Frequencies of Internal Source The EUT is provided by Wistron NeWeb Corp., for detailed internal source, please refer to the manufacturer‘s specifications. Report No.: FD190606E05 Page No. 7 / 27 Report Format Version: 6.1.2

4 Configuration and Connections with EUT 4.1 Connection Diagram of EUT and Peripheral Devices LTE & GPS (1) Adapter USB type C (2) (A)TELEPHONE RJ11 EUT LTE GPS (B) Signalling Tester (C) GPS simulator MD8475A Report No.: FD190606E05 Page No. 8 / 27 Report Format Version: 6.1.2

4.2 Configuration of Peripheral Devices and Cable Connections ID Product Brand Model No. Serial No. FCC ID Remarks A. TELEPHONE WONDER WD-303 8C17DA02763 NA Provided by Lab Signalling Tester B. Anritsu MD8475A 6201344422 NA Provided by Lab MD8475A C. GPS simulator T&E Communication GSG-5 201062 NA Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). ID Descriptions Qty. Length (m) Shielding (Yes/No) Cores (Qty.) Remarks 1. USB cable 1 1 Yes 0 Supplied by client 2. RJ11 cable 1 1 No 0 Provided by Lab Note: The cores are originally attached to the cables Report No.: FD190606E05 Page No. 9 / 27 Report Format Version: 6.1.2

5 Conducted Emissions at Mains Ports 5.1 Limits Class A (dBuV) Class B (dBuV) Frequency (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 Notes: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases linearly with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 5.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100287 Apr. 16, 2019 Apr. 15, 2020 R&S Line-Impedance Stabilization Network (for NSLK-8127 8127-523 Oct. 19, 2018 Oct. 18, 2019 EUT) SCHWARZBECK Line-Impedance Stabilization Network ENV216 100071 Nov. 05, 2018 Nov. 04, 2019 (for Peripheral) R&S RF Cable 5D-FB COACAB-001 Mar. 14, 2019 Mar. 13, 2020 10 dB PAD STI02-2200-10 002 Mar. 14, 2019 Mar. 13, 2020 EMEC 50 ohms Terminator N/A EMC-04 Nov. 14, 2018 Nov. 13, 2019 50 ohms Terminator N/A EMC-01 Oct. 04, 2018 Oct. 03, 2019 Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conducted Room D 3. The VCCI Con D Registration No. is C-20005. 4. Tested Date: July 05, 2019 Report No.: FD190606E05 Page No. 10 / 27 Report Format Version: 6.1.2

5.3 Test Arrangement a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The test results of conducted emissions at mains ports are recorded of six worst margins for quasi-peak (mandatory) [and average (if necessary)] values against the limits at frequencies of interest unless the margin is 20 dB or greater. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 5.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FD190606E05 Page No. 11 / 27 Report Format Version: 6.1.2

ied Eusnn 5.5 Test Results Detector Function . Frequency Range 150kHz ~ 3OMHz & Resolution gg;?;e(i@g@ggljz Bandwidth " Input Power 120Vac, 60Hz Eg‘r"'&;’t:‘o""]zn‘a' 25°C, 75%RH Tested by Kevin Ko Test Mode Mode 1 Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15781 10.06 20.25 5.48 30.31 15.54 65.58 55.58 —35.27 —40.04 2 0.40391 10.09 23.93 15.11 34.02 25.20 57.77 47.77 —23.75 —22.57 3 0.47031 10.10 33.70 27.63 43.80 37.73 56.51 46.51 42.71 —8.78 4 0.79844 10.12 21.32 11.61 31.44 21.73 56.00 46.00 —24.56 —24.27 5 2.02344 10.21 16.67 8.57 26.88 18.78 56.00 46.00 —29.12 —27.22 6 7.55078 10.51 16.65 7.52 27.16 18.03 60.00 50.00 —32.84 —31.97 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD190606E05 Page No. 12 / 27 Report Format Version: 6.1.2

ied Eusnn Detector Function . Frequency Range 150kHz ~ 3OMHz & Resolution gg;?;e(i@g@ggljz Bandwidth " Input Power 120Vac, 60Hz Eg‘r"'&?‘:‘o""]zn‘a' 25°C, 75%RH Tested by Kevin Ko Test Mode Mode 1 Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. a.P. AV. a.P. AV. 1 0.47422 10.14 27.50 21.99 37.64 3213 56.44 46.44 —18.80 —14.31 2 0.50156 10.15 22.52 6.06 82.67 16.21 56.00 46.00 —23.33 —29.79 3 0.53281 10.15 23.25 11.90 33.40 22.05 56.00 46.00 —22.60 —23.95 4 0.81797 10.17 17.32 9.27 2749 19.44 56.00 46.00 —28.51 —26.56 5 148828 10.23 12.81 6.68 23.04 16.91 56.00 46.00 —32.96 —29.09 6 7.77344 10.62 12.21 4.16 22.83 14.78 60.00 50.00 —37.17 —35.22 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD190606E05 Page No. 13 / 27 Report Format Version: 6.1.2

6 Radiated Emissions up to 1 GHz 6.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 39 29.5 88-216 43.5 33.1 40 30 216-230 46.4 35.6 230-960 47 37 960-1000 49.5 43.5 Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 49.5 40 88-216 54 43.5 50.5 40.5 216-230 56.9 46 230-960 57.5 47.5 960-1000 60 54 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. QP detector shall be applied if not specified. Report No.: FD190606E05 Page No. 14 / 27 Report Format Version: 6.1.2

6.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY51210105 June 19, 2019 June 18, 2020 Agilent Pre-Amplifier ZFL-1000VH2B AMP-ZFL-03 Oct. 30, 2018 Oct. 29, 2019 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-360 Nov. 20, 2018 Nov. 19, 2019 SCHWARZBECK Fixed attenuator UNAT-5+ PAD-CHG-01 Sep. 27, 2018 Sep. 26, 2019 Mini-Circuits 8D-FB CHFCAB-003-2 May 02, 2019 May 01, 2020 RF Cable 8D-FB CHGCAB-001-2 Sep. 27, 2018 Sep. 26, 2019 RF-141 CHGCAB-004 Sep. 27, 2018 Sep. 26, 2019 Software ADT_Radiated NA NA NA BVADT _V8.7.08 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber G room 3. The VCCI Site Registration No. is R-20009. 4. Tested Date: July 05, 2019 Report No.: FD190606E05 Page No. 15 / 27 Report Format Version: 6.1.2

6.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is up to 1 GHz. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency up to 1GHz. 3m For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 6.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FD190606E05 Page No. 16 / 27 Report Format Version: 6.1.2

ezs pmnsnm veRitas 6.5 Test Results Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Environmental s o Input Power 120Vac, 60Hz Conditions 19°C, 65%RH Tested by Kevin Ko Test Made Mode 1 Antenna Polarity & Test Distance : Horizontal at 3 m Emission l ; Antenna Table Raw Correction No Frt(a&t;ezr;cy Level (dIB;Ln\qll/tm) M(erg;n Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 146.88 33.22 QP 43.50 —10.28 2.00 H 0 41.31 —8.09 2 191.00 38.91 QP 43.50 ~4.59 2.00 H 0 49.52 ~10.61 3 226.74 27.49 QP 46.00 —18.51 2.00 H 0 37.53 —10.04 4 290.59 32.04 QP 46.00 —13.96 3.00 H 205 39.15 ~711 5 418.19 32.85 QP 46.00 —13.15 4.00 H 271 36.89 ~4.04 6 433.86 31.85 QP 46.00 —14.15 2.00 H 246 35.15 —3.30 Remarks: 1. Emission Level{dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim) ao— 80 70 60 s [— * T a 5a an 3 20 10 o_I 1 1 1 1 1 1 1 1 1 30— 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Report No.: FD190606E05 Page No. 17 / 27 Report Format Version: 6.1.2

ezs pmnsnm veRitas Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Environmental s o Input Power 120Vac, 60Hz Conditions 19°C, 65%RH Tested by Kevin Ko Test Mode Mode 1 Antenna Polarity & Test Distance : Vertical at 3 m Emission l ; Antenna Table Raw Correction No Frt(a'\q/ltlj_iezr;cy Level ( déhn\q/'/tm ) M(erg;n Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 38.95 29.60 QP 40.00 —10.40 1.00 V 124 38.61 —9.01 2 51.22 29.72 QP 40.00 —10.28 1.00 V 164 38.36 —8.64 3 117.71 27.89 QP 43.50 —15.61 2.00 V 259 38.33 —10.44 4 172.76 29.74 QP 43.50 —13.76 1.00 V 251 38.69 —8.95 5 316.22 39.63 QP 46.00 —6.37 1.05 V 327 45.93 —6.30 6 432.23 33.21 QP 46.00 —12.79 1.00 V 62 36.59 —3.38 Remarks: 1. Emission Level{dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim) ao— 80 70 60 so 49 ’—l 3 N [— 12 |g )4 30 20 10 07 1 1 1 i i 1 i i 1 30 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Report No.: FD190606E05 Page No. 18 / 27 Report Format Version: 6.1.2

7 Radiated Emissions above 1 GHz 7.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 1000-3000 Avg: 49.5 Avg: 43.5 Not defined Not defined Above 3000 Peak: 69.5 Peak: 63.5 Not defined Not defined Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B Avg: 56 Avg: 50 1000-3000 Avg: 60 Avg: 54 Peak: 76 Peak: 70 Peak: 80 Peak: 74 Avg: 60 Avg: 54 Above 3000 Peak: 80 Peak: 74 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Frequency Range (For unintentional radiators) Highest frequency generated or used in the device or Upper frequency of measurement range (MHz) on which the device operates or tunes (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 5th harmonic of the highest frequency or 40GHz, Above 1000 whichever is lower Report No.: FD190606E05 Page No. 19 / 27 Report Format Version: 6.1.2

7.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY51210105 June 19, 2019 June 18, 2020 Agilent Horn Antenna HA-07M18G-NF 0000320091110 Nov. 25, 2018 Nov. 24, 2019 FT-RF Pre-Amplifier 8449B 3008A02578 June 12, 2019 June 11, 2020 Agilent 150406 RF Cable 104 RF cable 131212 Jan. 10, 2019 Jan. 09, 2020 131205 Software ADT_Radiated_ NA NA NA BVADT V8.7.08 Antenna Tower & Turn NA NA NA NA Table CT Test Receiver N9038A MY51210105 June 19, 2019 June 18, 2020 Agilent Horn Antenna HA-07M18G-NF 0000320091110 Nov. 25, 2018 Nov. 24, 2019 FT-RF Fix tool for Boresight BAF-01 5 NA NA antenna tower Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber G room 3. Tested Date: July 05, 2019 Report No.: FD190606E05 Page No. 20 / 27 Report Format Version: 6.1.2

7.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The spectrum analyzer system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. Note: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection (PK) at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. Ant. Tower 1 - 4m Variable EUT& 3m Support Units Turn Table Absorber 80cm Ground Plane Test Receiver The test arrangement is in accordance with ANSI 63.4:2014. For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 7.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FD190606E05 Page No. 21 / 27 Report Format Version: 6.1.2

ezs pmnsnm 7.5 Test Results Frequency Range 1GHz ~ 10.7GHz gg;%?zi)étgunctlon § is:ra(gF;K(XV), 1MHz Input Power 120Vac, 60Hz Coniaione® 21°C, 65%RH Tested by Kevin Ko Test Mode Mode 1 Antenna Polarity & Test Distance : Horizontal at 3 m mo requensy t¥ "Teso" (dBuy/m) um veen (CBuV/‘m) (dB) Mome (m) Roe vae Teur" (Degree) (dBuv) (dB/im) 1 1658.75 41.34 PK 74.00 —32.66 1.00 H 164 45.13 —3.79 2 1658.75 27.79 AV 54.00 —26.21 1.00 H 360 31.58 —3.79 3 4964.40 51.14 PK 74.00 —22.86 1.00 H 114 41.59 9.55 4 4964.40 38.52 AV 54.00 —15.48 1.00 H 0 28.97 9.55 5 6156.95 54.47 PK 74.00 —19.53 1.00 H 85 41.28 13.19 6 6156.95 41.70 AV 54.00 —12.30 1.00 H 75 28.51 13.19 7 6612.55 56.66 PK 74.00 17.34 1.00 H 225 41.08 15.58 8 6612.55 44.23 AV 54.00 —9.77 1.00 H 214 28.65 15.58 9 6927.90 58.52 PK 74.00 —15.48 1.00 H 103 41.85 16.67 10 6927.90 45.37 AV 54.00 —8.63 1.00 H 360 28.70 16.67 11 9098.80 58.64 PK 74.00 —15.36 1.00 H 333 43.70 14.94 12 9098.80 45.25 AV 54.00 —8.75 1.00 H 0 30.31 14.94 Remarks: 1. Emission Level{dBuV/m) = Raw Value(dBuV) + Correction Factor{dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim) BJ 1 i i i i i 1000 2000 4000 6000 8000 10000 12000 14000 16000 18000 Frequency (MHz) Report No.: FD190606E05 Page No. 22 / 27 Report Format Version: 6.1.2

ezs pmnsnm Frequency Range 1GHz ~ 10.7GHz gg;%?zi)étgunctlon § is:ra(gF;K(XV), 1MHz Input Power 120Vac, 60Hz Coniaione® 21°C, 65%RH Tested by Kevin Ko Test Mode Mode 1 Antenna Polarity & Test Distance : Vertical at 3 m Pregueney Emission Limit Margin Antgnna Table Raw Correction No (MHz) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1809.20 42.05 PK 74.00 —31.95 1.00 V 313 44.94 —2.89 2 1809.20 29.92 AV 54.00 —24.08 1.00 V 360 32.81 —2.89 3 3133.50 45.53 PK 74.00 —28.47 1.00 V 330 42.98 2.55 4 3133.50 32.73 AV 54.00 —21.27 1.00 V 360 30.18 2.55 5 3894.25 47.45 PK 74.00 —26.55 1.00 V 76 40.97 6.48 6 3894.25 35.33 AV 54.00 —18.67 1.00 V 330 28.85 6.48 7 5478.65 52.36 PK 74.00 —21.64 1.00 V 193 40.84 11.52 8 5478.65 40.07 AV 54.00 —13.93 1.00 V 332 28.55 11.52 9 7132.75 58.33 PK 74.00 —15.67 1.00 V 344 42.05 16.28 10 7132.75 45.63 AV 54.00 —8.37 1.00 V 246 29.35 16.28 11 8791.10 58.43 PK 74.00 15.57 1.00 V 29 42.93 15.50 12 8791.10 44.81 AV 54.00 —9.19 1.00 V 254 29.31 15.50 Remarks: 1. Emission Level{dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim) BJ i i i i i i 1000 2000 4000 6000 8000 10000 12000 14000 16000 18000 Frequency (MHz) Report No.: FD190606E05 Page No. 23 / 27 Report Format Version: 6.1.2

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: FD190606E05 Page No. 27 / 27 Report Format Version: 6.1.2


Document Created: 2019-08-07 12:41:09
Document Modified: 2019-08-07 12:41:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC