Modular Approval Request

FCC ID: NKR-DHURAZ68

Cover Letter(s)

Download: PDF
FCCID_3757192

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: NKR-DHURAZ68 Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Please refer to external photos. The modular transmitter has its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if Buffered data inputs stage such inputs are provided) to ensure that the module will comply with Part has been integrated in 15 requirements under conditions of excessive data rates or chip MT7668AUN. over-modulation. 3. The modular transmitter must have its own power supply regulation. The model name of the power regulator is RT8096C. 4. The modular transmitter must comply with the antenna requirements of The requirements of Section 15.203 and 15.204(b)(c). The antenna must either be antenna connector and permanently attached or employ a “unique” antenna coupler (at all spurious emission have connections between the module and the antenna, including the cable). been fulfilled. Please reference the exhibition Test Report. 5. The modular transmitter must be tested in a stand-alone configuration, Please reference exhibition i.e., the module must not be inside another device during testing. This is Test Configuration intended to demonstrate that the module is capable of complying with Photo for the stand-alone Part 15 emission limits regardless of the device into which it is eventually test configuration. installed. 6. The modular transmitter must be equipped with either a permanently affixed The instruction on the label or must be capable of electronically displaying its FCC identification labeling rule of the end number in accordance with 15.212 (a)(1)(vi)(A) / (B). product has been stated in the users manual of this module. Please also see the exhibition Label Sample. 7. The modular transmitter must comply with any specific rule or operating The required FCC rule has requirements applicable to the transmitter and the manufacturer must provide been fulfilled and all the adequate instructions along with the module to explain any such requirements. instructions for maintaining

A copy of these instructions must be included in the application for equipment compliance has been authorization. For example, there are very strict operational and timing clearly stated in the Users requirements that must be met before a transmitter is authorized for operation Manual. under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 8. The modular transmitter must comply with any applicable RF exposure Please refer exhibition RF requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and Exposure for the specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and compliance of MPE RF 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices exposure rule. perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Name and surname of applicant (or authorized representative): Leo Huang___________ Date: _2018/2/12______________ Signature: _ __________________________


Document Created: 2018-02-12 17:06:45
Document Modified: 2018-02-12 17:06:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC