MODULAR APPROVAL LETTER

FCC ID: NKR-DFCN4

Cover Letter(s)

Download: PDF
FCCID_2184542

                        Wistron NeWeb Corporation
                     20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan
                              Tel: 886-3-666-7799 ; Fax: 886-3-666-7323
                                                                               Date: February 6, 2014
                                   Request for Modular Approval for
                                        FCC ID: NKR-DFCN4


Item                  Requirements                                          EUT
1.     The modular transmitter must have its own     The module is equipped with its own shielding
       RF shielding.                                 case.
2.     The modular transmitter must have buffered    The module has buffer modulation / data inputs.
       modulation / data inputs.
3.     The modular transmitter must have its own     The module has its own power supply regulation.
       power supply regulation.
4.     The module must contain a permanently         The requirements of antenna connector and
       attached antenna, or contain a unique         spurious emission have been fulfilled.
       antenna connector, and be marketed and
       operated only with specific antenna(s),
5.     The modular transmitter must be tested in a   The module was tested on evaluation board, and it’s
       stand-alone configuration.                    not inside of another device during testing
6.     The modular transmitter must be labeled       The module transmitter will be labeled with its own
       with its own FCC ID number.                   FCC ID, and for OEM integration the integration
                                                     manual contains labeling instructions for the host
                                                     device per Part 15.212 (vi)
7.     The modular transmitter must comply with      The module approved transmitter complies with all
       any specific rule or operating requirements   applicable rules and the integration manual contains
       applicable to the transmitter and the         any specific requirements addressed to the
       manufacturer must provide adequate            integrator and/or to the end-user of the final
       instructions along with the module to         end-product.
       explain any such requirements.
8.     The modular transmitter must comply with      The device is excluded from the RF Exposure
       any applicable RF exposure requirement.       requirement due to its very low radiating power.



Document Created: 2019-07-02 22:40:37
Document Modified: 2019-07-02 22:40:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC