Power Sensor 1

FCC ID: NHPWLG1200

Test Report

Download: PDF
FCCID_392932

:products : Peak Power Sensors Model Frequency Dynamic Overload Sensor Response Impedance Range Range Rating RF (Low Peak Pwr Rng Pulse / Connector Bandwidth) CW Pwr Rng(1) Continuous Int Trigger Fast Slow Range Risetime Risetime (Bandwidth) (Bandwidth) DUAL DIODE PEAK POWER SENSORS For use with models 4400, 4500, 4400A, and 4500A RF Peak Power Meters a 4530 Series RF Power Meter when combined with Model 2530 1 GHz calibrator ac 56218 -24 to +20 dBm 1 W for 1µs <150 ns <500 ns 50 ohm 0.03 to 18 GHz -34 to +20 dBm 200 mW (2 MHz) (700 kHz) N (M) -10 to +20 dBm 56318 -24 to +20 dBm 1 W for 1µs <15 ns (2) <200 ns 50 ohm 0.5 to 18 GHz -34 to +20 dBm 200 mW (35 MHz) (1.75 MHz) N (M) -10 to +20 dBm 56326 -24 to +20 dBm 1 W for 1µs <15 ns(2) <200 ns 50 ohm 0.5 to 26.5 GHz -34 to +20 dBm 200 mW (35 MHz) (1.75 MHz) K (M) -10 to +20 dBm 56418 -34 to +5 dBm 1 W for 1µs <30 ns <100 ns 50 ohm 0.5 to 18 GHz -40 to +5 dBm 200 mW (15 MHz) (6 MHz) N (M) -18 to +5 dBm 56518 -40 to +20 dBm 1 W for 1µs <100 ns <300 ns 50 ohm 0.5 to 18 GHz -50 to +20 dBm 200 mW (6 MHz) (1.16 MHz) N (M) -27 to +20 dBm For use with models 4400, 4500, 4400A, 4500A, and 4530. Compatible with 4530 Series internal 50 MHz calibrator. 57318 0.5 to 18 GHz -24 to +20 dBm 1 W for 1µs <15 ns(2) <10 µs 50 ohm (0.05 to 18 -34 to +20 dBm 200 mW (35 MHz) (35 kHz) N (M) GHz) -10 to +20 dBm 57340 0.5 to 40 GHz -24 to +20 dBm 1 W for 1µs <15 ns(2) <10 µs 50 ohm (0.05 to 40 -34 to +20 dBm 200 mW (35 MHz) (35 kHz) K (M) GHz) -10 to +20 dBm

57540 0.1 to 40 GHz -40 to +20 dBm 1 W for 1µs <100 ns <10 µs 50 ohm (0.05 to 40 -50 to +20 dBm 200 mW (6 MHz) (35 kHz) K (M) GHz) -27 to +20 dBm


Document Created: 2004-01-30 09:42:05
Document Modified: 2004-01-30 09:42:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC