TCB Checklist

FCC ID: NF3FM4

Cover Letter(s)

Download: PDF
FCCID_133626

§2.933 Change in identification of equipment. (a) A new application for equipment authorization shall be filed whenever there is a change in the FCC Identifier for the equipment with or without a change in design, circuitry or construction. However, a change in the model/type number or trade name performed in accordance with the provisions in §2.924 of this chapter is not considered to be a change in identification and does not require additional authorization from the Commission. Change in FCC Identifier. (b) An application filed pursuant to paragraph (a) of this section where no change in design, circuitry or construction is involved, need not be accompanied by a resubmission of equipment or measurement or test data customarily required with a new application, unless specifically requested by the Commission. In lieu thereof, the applicant shall attach a statement setting out: (1) The original identification used on the equipment prior to the change in identification. See Form 731 (2) The date of the original grant of the equipment authorization. FCC ID: MRBSATELLINE-3AS Grant Date 2/16/2000 (3) How the equipment bearing the modified identification differs from the original equipment. Equipment is identical. See file builtequal.pdf (4) Whether the original test results continue to be representative of and applicable to the equipment bearing the changed identification. Not Applicable, no changes were made to the equipment. (5) The photographs required by §2.1033(b)(7) or §2.1033(c)(12) showing the exterior appearance of the equipment, including the operating controls available to the user and the identification label. Photographs of the construction, the component placement on the chassis, and the chassis assembly are not required to be submitted unless specifically requested by the Commission. See file FCC ID Label Y 261 A21 464.pdf for label See file Photos.pdf for internal and external photos (c) If the change in the FCC Identifier also involves a change in design or circuitry which falls outside the purview of a permissive change described in §2.1043, a complete application shall be filed pursuant to §2.911. Not Applicable


Document Created: 2019-06-03 17:35:38
Document Modified: 2019-06-03 17:35:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC