RFExposure.pdf

FCC ID: NF3-LRR4

RF Exposure Info

Download: PDF
FCCID_2351548

                                     Test report no.: 1-5968/13-01-03



9.3   Maximum Permissible Exposure (MPE)
MPE Calculation:




                                                                          Note: OP [mW], AG as lin.factor

§ 1.1310 Radiofrequency radiation exposure limits.

The criteria listed in table 1 shall be used to evaluate the environmental impact of human exposure to
radiofrequency (RF) radiation as specified in § 1.1307(b), except in the case of portable devices which shall be
evaluated according to the provisions of § 2.1093 of this chapter. Further information on evaluating compliance
with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-
Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’

NOTE TO INTRODUCTORY PARAGRAPH: These limits are generally based on recommended exposure
guidelines published by the National Council on Radiation Protection and Measurements (NCRP) in ‘‘Biological
Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields,’’ NCRP Report No. 86, Sections
17.4.1, 17.4.1.1, 17.4.2 and 17.4.3.
Copyright NCRP, 1986, Bethesda, Maryland 20814. In the frequency range from 100 MHz to 1500 MHz,
exposure limits for field strength and power density are also generally based on guidelines recommended by the
American National Standards Institute (ANSI) in Section 4.1 of ‘‘IEEE Standard for Safety Levels with Respect
to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz,’’ ANSI/IEEE C95.1–1992,
Copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.




[61 FR 41016, Aug. 7, 1996]


2014-07-18                                                                                    Page 15 of 33


                                    Test report no.: 1-5968/13-01-03



Results:

Refer to 9.1, the maximum average radiated power is 6.96 dBm = 4.97 mW (at Tmin / Vmin-Vmax)

d = 20 cm



     PD = 0.001 mW/cm2


Limits:                                                                                  FCC §1.1310 (B)

                    Frequency [GHz]                                   Power Density [mW / cm2]
                1.500 GHz – 100.000 GHz                                     1 mW / cm2




Result: The measurement is passed.


2014-07-18                                                                                     Page 16 of 33



Document Created: 2014-07-30 13:44:46
Document Modified: 2014-07-30 13:44:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC