MPE estimation

FCC ID: NF3FR5CPEC

RF Exposure Info

Download: PDF
FCCID_4041416

                                                                                                                               D-PL-12076-01-03


      BNetzA-CAB-02/21-102




                         Maximum Permissible Exposure (MPE) &
                                                 Exposure evaluation


                     Report identification number: 1-6027/18-02-09 MPE (FCC_IC)

                                     Certification numbers and labeling requirements
 FCC ID                                                                       NF3 - FR5CPEC
 IC number                                                                    3887A - FR5CPEC
 HVIN (Hardware Version Identification Number)                                Front Radar 5 Car Plus Ethernet CAN
 PMN (Product Marketing Name)                                                 FR5CPEC
 FVIN (Firmware Version Identification Number)                                -/-



This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the
public keys can be requested at the testing laboratory.




Document authorised:
                              DN: cn=Thomas Vogler, o=CTC advanced
                              GmbH, ou=VOG-161125,                                                 cn=Marco Scigliano, o=CTC advanced
                              email=thomas.vogler@ctcadvanced.com,                                 GmbH, ou=SCI-161125,
                              c=DE                                                                 email=marco.scigliano@ctcadvanced.com,
                              Datum: 2018.08.17 12:14:05 +02'00'                                   c=DE
                                                                                                   2018.08.17 12:02:19 +02'00'


Thomas Vogler                                                               Marco Scigliano
Lab Manager                                                                 Testing Manager
Radio Communications & EMC                                                  Radio Communications & EMC




© CTC advanced GmbH                                                  Page 1 of 3


                                         Report no.: 1-6027/18-02-09


EUT technologies:

     Technologies:            Max. power (AVG):                  Max. antenna gain:           Min. pathloss:
     76 GHz Radar         Measured max. EIRP: 22.8dB*                   n/a                  -- (if applicable)

)* detailed measurement results in CTC advanced test report 1-6027/18-01-07


Prediction of MPE limit at given distance - FCC

Equation from page 18 of OET Bulletin 65, Edition 97-01

S = PG / 4π R2

where: S = Power density
       P = Power input to the antenna
       G = Antenna gain
       R = Distance to the center of radiation of the antenna
       PG = Output Power including antenna gain

The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure
(MPE), Limits for General Population/Uncontrolled Exposure”

     Frequency Range (MHz)                 Power Density (mW/cm2)                  Averaging Time (minutes)
            300 -1500                              f/1500                                     30
          1500 - 100000                              1.0                                      30

where f = Frequency (MHz)

Prediction: worst case

      Technology                                                RADAR
      Frequency                                                   76000   MHz
P∙G Measured max. EIRP (avg.)                                      22.8   dBm
R     Distance                                                       20   cm
S     MPE limit for uncontrolled exposure                        1.0000   mW/cm2
      Calculated Power density:                                  0.0379   mW/cm²
      Calculated percentage of limit:                            3.79%
This prediction demonstrates the following:

The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations.




© CTC advanced GmbH                              Page 2 of 3


                                          Report no.: 1-6027/18-02-09


Prediction of MPE limit at given distance - IC

RSS-102, Issue 5, 2.5.2

RF exposure evaluation is required if the separation distance between the user and/or bystander and the
device’s radiating element is greater than 20 cm, except when the device operates as follows:
        • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less
        than 1 W (adjusted for tune-up tolerance);
        • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 4.49/ƒ0.5W (adjusted for tune-up tolerance), where ƒ is in MHz;
        • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 0.6 W (adjusted for tune-up tolerance);
        • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;
        • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or
        less than 5 W (adjusted for tune-up tolerance).


Prediction: worst case

                                                     76   GHz
    Technology                                  RADAR
    Frequency                                    76000    MHz
P∙G Max. measured EIRP (avg.)                      22.8   dBm
R   Distance                                         20   cm
    Maximum EIRP                                  190.5   mW
    Exclusion Limit from above:                    5.00   W
    Calculated percentage of limit:              3.81%

Conclusion: RF exposure evaluation is not required.
            For applications where minimum distance to radiating element is 20cm Annex C of RSS-102
            should be filled out.




© CTC advanced GmbH                              Page 3 of 3



Document Created: 2018-08-17 12:14:05
Document Modified: 2018-08-17 12:14:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC