user manual 2 of 2

FCC ID: NDPOT-110

Users Manual

Download: PDF
FCCID_1515248

Find your IP address To find your IP address: 1. Double tap or on the taskbar. 2. The WLAN IP address is displayed at the IP Information tab. Using BT Manager BT Manager is a small utility which allows OT-110 to search and connect to Bluetooth devices using the SPP profile (Serial Port Profile). To use the BT Manager, please enable it via the Settings Manager. Once enabled, the BT manager icon will appear on the taskbar shown as below. 1. Double-click on the icon to open the BT Manager window. 2. Click on the Search button to search for devices. 44 CHAPTER 2 LEARNING THE BASICS

3. The window name on top will change to “Search running…”. Bluetooth devices will appear in the list as shown Please wait for MP-300 search to finish. To cancel the search, please press the STOP Sch. button. 4. Searching is complete once window name shows “BT Manager” again. Select the Bluetooth device in the list that you MP-300 wish to connect to, and click on the Connect button. 5. The Bluetooth device may ask for a PIN number to authenticate with OT-110. Enter the same PIN number on both devices. For Partner Tech MP-300 Bluetooth mobile printer, the default PIN number is 0000. 6. Once the Bluetooth device is connected successfully, a message appears in the window. 7. When connected to Partner Tech MP-300 MP-300 Bluetooth mobile printer, click on the Print button to print a test message. 8. To disconnect from the Bluetooth device, click on the STOP button. 9. To hide the BT Manager window, click on the Hide button. Clicking on the X button on the top right of the window will close the BT Manager utility. ATTENTION 45

Synchronization By synchronizing OT-110 with your computer, you have access to the same information—your Microsoft Office Outlook e-mail messages and calendar, your media files, your work documents, and more—on OT-110 or your computer. It’s a good idea to synchronize regularly. Before you begin, get the Mini-USB to USB cable, you’ll use it to download and install a program that syncs content between OT-110 and your computer. If your computer is running Windows Vista or 7, synchronization settings are managed through Windows Mobile Device Center (WMDC). You can also visit http://www.microsoft.com/windowsmobile to download WMDC. Synchronize your data with ActiveSync and Windows XP 1. Install Microsoft ActiveSync. If your computer is running Windows XP or an earlier version, synchronization settings are managed through Microsoft ActiveSync. You can visit http://www.microsoft. com/windowsmobile for more information or to download Microsoft ActiveSync. 2. Download and install ActiveSync on your computer. 3. Connect the OT-110 to the computer by using the Mini-USB to USB cable. 4. Sync your e-mail, contacts, and calendar appointments (if you use the calendar in your e-mail account). 5. Sync your music, photos, videos, and other files. 46 CHAPTER 2 LEARNING THE BASICS

Synchronize your data with ActiveSync and Windows Vista/ 7 1. Download and install WMDC on your computer. If your computer is running Windows Vista or 7, synchronization settings are managed through Windows Mobile Device Center (WMDC). You can also visit http://www.microsoft.com/windowsmobile to download WMDC. 2. Connect the OT-110 to the computer by using the Mini-USB to USB cable. 3. Sync your e-mail, contacts, and calendar appointments (if you use the calendar in your e-mail account). 4. Sync your music, photos, videos, and other files. 47

Copy or move files between the computer and OT-110 You can copy files to and from the computer using ActiveSync. To copy or move files using ActiveSync (Windows XP): 1. Connect OT-110 to the computer using a Mini-USB to USB cable. 2. On the computer, select Start > Programs > ActiveSync. 3. In the ActiveSync window, select Explore. 4. Double-click My Windows Mobile-Based Device. 5. Open Windows Explorer on your computer and locate the files to be copied. 6. Right-click the file that you want to copy or move, then click Copy or Cut. 7. Scroll to and then click Mobile Device, open the folder to or from which you want to copy or move a file. Right-click in the folder that you want to move it to, and then click Copy, Cut, or Paste. 8. If the File Conversion dialog box appears, click OK. To copy or move files using WMDC (Windows Vista/ 7): 1. Connect OT-110 to the computer using a Mini-USB to USB cable and wait for WMDC to launch automatically. 2. Click File Management to open the Mobile Device folder for OT-110. 3. In the Mobile Device folder, navigate and select the file that you want to copy on OT-110 or computer. 4. Right-click the file that you want to copy or move, then click Copy or Cut. 5. Scroll to and then click Mobile Device, open the folder to or from which you want to copy or move a file. Right-click in the folder that you want to move it to, and then click Copy, Cut, or Paste. 6. If the File Conversion dialog box appears, click OK. 48 CHAPTER 2 LEARNING THE BASICS

Install and remove programs To install programs on the OT-110: 1. Use a Mini-USB to USB cable to connect the OT-110 to the computer. 2. Follow the instructions in the Installation Wizard provided with the program you want to install. 3. Check the screen on the OT-110 to see if any further steps are necessary to complete the program installation. To remove programs from the OT-110: 1. Tap → Settings → Control Panel. 49

2. Double tap the Remove Programs icon. 3. Select the programs you want to remove, and then tap the Remove button. 50 CHAPTER 2 LEARNING THE BASICS

Backup data Backup request the MicroSD card installed 1. Tap → Settings → Control Panel. 2. Double tap the Backup icon. 51

3. Select Backup. 4. Select SD card • To use SN protection, check the box of Need to match S/N. When restore, the device serial number must match the serial number embedded in the backup. • To backup all files on device, check the box of Backup all files on device. • To backup system registry, check the box of Backup system registry. 5. Tap the Start button. 6. Wait period for backup process. 7. When backup is complete, the system will prompt you. 52 CHAPTER 2 LEARNING THE BASICS

Restore data To restore the backup data: 1. Tap → Settings → Control Panel. 2. Double tap the Backup icon. 53

3. Select Restore. 4. Click the File... button. 5. Select the backup file. 6. Click the OK button. 7. Wait period for restore process. 8. When restore is complete, the system will prompt you to reboot the device. 9. Click OK. 54 CHAPTER 2 LEARNING THE BASICS

Upgrading Operating System Unless you are familiar with the firmware do not do the following operation. To upgrade Operating System: 1. Fully charge the battery 2. Copy new OS files to the root directory of your Micro SD card. 3. Power off OT-110. 4. Open the battery compartment cover and remove the battery. 5. Insert the Micro SD card into OT-110. 6. Install the battery back. 55

7. Use a paper clip press and hold the update button on the battery cover and then press the power button. When the machine starts to vibrate, please release these buttons. 8. Press the power button to select “01. UPGRADE IMAGE VIA SD/ MMC” and then press and hold the power button for five seconds to confirm. 9. Press the power button to select “00. UPGRADE ALL” or “01. UPGRADE ALL + FORMAT” , and then press and hold the power button for five seconds to confirm. 10. When the screen displays “UPGRADE DONE” remove the battery cover, remove the battery. 11. Replace the battery and the cover. 12. Power on the device. 56 CHAPTER 2 LEARNING THE BASICS

CHAPTER 3 USING THE ACCESSORIES This chapter describes how to use the device accessories. • Attaching the stylus cord on page 57 • Attaching the hand strap on page 58 • Using the leather pouch on page 59 • Attaching the leather pouch cord on page 60 • Using the high quality stylus on page 61 Attaching the stylus cord Refer to the following to attach the stylus cord. 1. Thread the small loop of the stylus cord through the strap eyelet on the stylus and pull the other end of the cord through the small loop until the cord is firmly secured. 2. Thread the other small loop of the stylus cord through the top hand strap eyelet on the device and use stylus pull the cord through the small loop until the cord is firmly secured. 57

Attaching the hand strap Refer to the following to attach the hand strap. 1. Insert the bottom of the hand strap into the slot at the bottom of the battery cover, until it clicks into place. 2. Thread the end of the hand strap through the top hand strap eyelet on the device then fold and stick together. • The hand strap length can be adjusted by sticking the Velcro to a higher or lower position on the strap. 58 CHAPTER 3 USING THE ACCESSORIES

Using the leather pouch Using the leather pouch to carry the OT-110 is a good way to keep it protected. Simply insert the device into the leather pouch as shown below. A belt clip located on the back of the leather pouch allows you to wear the OT-110 on your side. In addition, a shoulder strap can be attached to the two integrated rings on the back side. Shoulder strap is adjustable Clip to your belt 59

Attaching the leather pouch cord A leather pouch cord is provided to attach device to the leather pouch. 1. Open the battery cover. 2. Thread the small loop of the cord through the bottom corner strap eyelet on the device. Pull the other end of the cord through the small loop until the cord is firmly secured. 3. Replace the battery cover. 4. Lock the other end of the cord to one of the rings on the back of the leather pouch. 5. To insert device into cradle for charging, simply detach as shown. 60 CHAPTER 3 USING THE ACCESSORIES

Using the high quality stylus A high quality stylus is included for your convenience. 61

62 CHAPTER 3 USING THE ACCESSORIES

CHAPTER 4 INSTALLING THE OPTIONAL MODULES This chapter describes how to install and test the optional modules. • Installing the MSR module on page 63 • Testing the MSR module on page 64 • Installing the RFID reader/writer module on page 66 • Testing the RFID reader/writer module on page 67 • Installing the Barcode Scanner module on page 69 • Testing the Barcode Scanner module on page 70 Installing the MSR module Refer to the following to install the MSR module. 1. Remove the two screws on the top cover. 2. Remove the top cover. 3. Connect the MSR module to Slot A slot A of the OT-110 as shown. 4. Fix the MSR module with two screws as shown. 63

Testing the MSR module Refer to the following to check if the module working properly. 1. Tap → Settings → Control Panel. 2. Double tap the Setting Manager icon. 3. Tap MSR Setting. 64 C H A P T E R 4 I N S TA L L I N G T H E O P T I O N A L M O D U L E S

4. Tap Default. 5. Tap Apply. 6. Tap Test. 7. Swipe a magnetic stripe card. 8. Check if the data appear in the text box. 65

Installing the RFID reader/writer module Refer to the following to install the RFID reader/writer module. 1. Remove the two screws on the top cover. 2. Remove the top cover. 3. Connect the RFID reader/ Slot B writer module to slot B of the OT-110 as shown. 4. Fix the RFID reader/writer module with two screws as shown. 66 C H A P T E R 4 I N S TA L L I N G T H E O P T I O N A L M O D U L E S

Testing the RFID reader/writer module Refer to the following to check if the module working properly. 1. Tap → Settings → Control Panel. 2. Double tap the Setting Manager icon. 3. Tap Test RFID. 67

4. Place a RFID card on the module. 5. Tap Open on COM7 selection. 6. Tap SID or Read. 7. Check if the data appear in the text bar. 68 C H A P T E R 4 I N S TA L L I N G T H E O P T I O N A L M O D U L E S

Installing the Barcode Scanner module Refer to the following to install the Barcode Scanner module. 1. Remove the two screws on the top cover. 2. Remove the top cover. 3. Connect the Barcode Scanner Slot B module to slot B of the OT-110 as shown. 4. Fix the Barcode Scanner module with two screws as shown. 69

Testing the Barcode Scanner module Refer to the following to check if the module working properly. 1. Tap → Settings → Control Panel. 2. Double tap the Setting Manager icon. 3. Tap 1D Scanner Setting. 70 C H A P T E R 4 I N S TA L L I N G T H E O P T I O N A L M O D U L E S

4. Tap the Barcode Type tab. 5. Select types. 6. Tap Apply. 7. Tap the BCR_ SETTINGS tab. 8. Tap Default. 9. Tap Apply. 10. Tap Test. 71

11. Press the scan button on the Barcode Scanner module and scan a barcode. 12. Check if the data appear in the text box. 72 C H A P T E R 4 I N S TA L L I N G T H E O P T I O N A L M O D U L E S

APPENDIX This appendix describes locating and solving problems that you may encounter while using the OT-110. Troubleshooting Often after time spent troubleshooting, the problem is traced to something as simple as a loose connection. Check the following before proceeding to the problem-specific solutions. Tips for Troubleshooting In each problem-specific section, try the steps in the order suggested. This may help you to solve the problem more quickly. Try to pinpoint the problem and thus avoid replacing non-defective parts. For example, if you replace batteries and the problem remains, put the original batteries back and go to the next step. Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel. • Use some other electrical device to confirm that the electrical outlet is working. • Ensure all connections are securely attached. General Problems Refer to the following for general problems you may encounter. PROBLEM SOLUTION You cannot turn on the device • Plug AC adaptor directly into device to check device is functioning. If device functions properly, then issue may be with the battery. • Check that the battery is fully charged and properly installed into device. You have trouble charging the battery • Check that the AC adaptor is plugged in correctly to the DC jack on the device, and the other end into the wall outlet. • If using the cradle for charging, check that the AC adaptor is plugged in correctly to the cradle and the wall outlet. • Check for damage to the power cables. • If battery has been used extensively and is old, replace with new battery and try again. You have trouble connecting to the • Check that device is connected to a WiFi network with the Internet correct network key (password). • Check if the WiFi network provides an IP address automatically via DHCP. If not, contact your network administrator for the relevant IP address, subnet, gateway, and DNS servers, which you need to enter manually. 73

Why does the device operate slowly at • Reset device. Does problem remain? If this solves problem, times? check if user installed applications are causing system to slow down. • Check that enough free storage memory remains on device, so that device operates smoothly and efficiently. • If device shows low storage memory, delete unnecessary files, or transfer files to SD card. Having the OT-110 Serviced If you are unable to solve the problem, you should have the device serviced. Pack the device in the original box. (See “Unpacking the OT-110” on page 1.) Include a description of the problem and a checklist of the steps you took when trying to fix the problem. The information may be useful to the service personnel. Return the device to the place you purchased it. Guidelines for care and maintenance It is recommended that you follow certain guidelines to prevent possible damage to the device and to keep it in a good condition. Using the device • Avoid using the device in dusty and extremely high or low temperature environments. • Do not spill water on the device or expose it to the rain. • Avoid removing the battery without turning off the device. • Do not apply strong force or shocks to the device. • Keep the device and its accessories away from children. • Do not insert metal objects into the charging/communications port of the device. This can short-circuit the battery and result in danger. Cleaning the device • Use a soft, clean, and slightly moistened cloth to clean the device. Do not let water come into contact with the microphone, speaker, or with any of the connectors. • Do not wipe the device with any corrosive liquid or coarse objects. This can damage the outer surface of the device. Transporting and storing the device • Do not leave the device in extremely high or low temperature environments. • If device is to be transported or stored for a long period of time, please remove the battery, and store both device and battery in a cool, dark, and dry place. Ideally, batteries should be stored at around 25˚C, or within a temperature range of -10˚C ~ 30˚C to maximize longetivity. Batteries in storage need to be charged every 3 months to prevent battery degradation • Batteries in storage need to be charged every 3 months to prevent battery degradation. 74 APPENDIX

Specifications CPU CPU Samsung S3C 6410 667 MHz Memory Mobile DDR 128MB, NAND flash 256MB LCD 4.3” widescreen (resolution 272*480) WLAN 802.11 b/g Connection interface Mini USB 2.0 ( Client ) / 1.1 ( Host) Audio Speaker, internal microphone, earphone jack, microphone jack Storage Micro SD card (support SDHC) Vibrator motor (for alerts) 4-way direction sensor Special features Ambient light sensor Backup restore utility Battery Li-ion 2200mAh (with Gas Gauge) Ruggedness IP54, 1.2 meter drop test Operating System Windows CE 6.0 Dimensions 133 x 82 x 19 mm (H x W x D) Sunlight-readable panel with power-saving function MSR Track 1,2,3 Option Barcode scanner 1 D / 2D RFID 13.56 MHz (Mifare) Weight Approx. 220g with battery Operating Temperature : 0 - 40 degree C Environment Storage Temperature : -20 - 60 degree C EMC & Safety: CE, FCC , BSMI , LVD Certifications RF: FCCID, R&TTE, NCC , Included: Hand strap, Stylus cord, High quality stylus, AC adaptor, Battery Accessories Optional: Cradle, Leather pouch with shoulder strap * specification subject to change without prior notice 75

76 APPENDIX


Document Created: 2011-07-28 09:00:27
Document Modified: 2011-07-28 09:00:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC