User Manual-0522

FCC ID: NDPMF2351

Users Manual

Download: PDF
FCCID_1974947

Handheld Termanal Manual PARTNER TECH CORPORATION Before using the product, Please carefully read the operating instructions

NO.1 Specifications Features Description Processor TI Cortex A8 AM3715，1GHz Operating WinCE 6.0 System Memory DDR2，2Gb(256M)；NAND Flash，4GB(512M)； Flash 3.5inch 240×320 Pixels / 262,000 Color, Display Support touch and stylus input Key Alpha & numeric Keys(Total 20 Hardware Keys) Specification Magnetic Card Triple Track (track 1, 2, & 3) IC card reader EMV/PBOC2.0 L1&L2; ISO 7816 SAM card 2 Expansion Slot Mini SD Card Slot USB 1 USB （OTG） RS232 1 USB（RS232） Printer High Speed, High resolution, thermal printer （Diameter30mm，Width58mm） Audio speaker (mono)x1, microphonex1 Vibration support Battery Rechargeable Battery： DC7.4V/2000mAh Power Power Adapter：Output voltage DC9V/3A ; Input voltage 100~240V, 50/60Hz Communication 1 SIM slot Interface(built-in) Secure Processor MAXQ1850 Performance Operating System VOS Specification Physical Dimension (mm)：208 (L) x 85.5(W) x 53(D) mm Specification Weight：500g Operating Temperature：0°C to 40°C Package USB Cable, Stylus Pen,AC adapter, Contents Rechargeable Battery Communication WCDMA,Bluetooth 2.1+EDR, WIFI 802.11 b/g,GPRS,GPS Camera 3.1 M Pixel Contactless reader ISO 14443 A/B/NFC，Contactless EMV Bar code 1D or 2D Scanner Fingerprint Certification CCC, EMV/PBOC2.0 Levle1&Level2 qPBOC2.0 L1 L2 Security Certificate for PIN Entry Device China UnionPay Network Access license

NO.2 Packaging / Packing List 1 MF=2351 1 piece 4 USB Line 1 piece 2 Power Adapter 1 piece 5 Thermal Print Paper 1 roll(optional) 3 AC Power Cord 1 piece 6 Rechargeable Battery 1 piece NO.3 Product Description 1 Description: RFID RFID reading area; Cutter Cut paper, tear printer paper by tilting at about 45 degrees from left to right along the cutter Touch Pannel 3.5 inch 240 × 320 pixels / 262,000 color Keypad Alpha & numeric keys(Total 20 hardware keys) Printer Cover Lever: Open the Printer Cover; Printer Paper Thermal paper with 58mm in width and 30 mm diameter;

Description: Printer Cover The cover is with a pressing shaft. Open it for loading paper, cover it until locked after loading printer paper; Indicating Lamp Power and working status indication; Power Socket Power unit (standard:Φ3.5mm DC jack); Function Key Definable; S erial Port RS 232 port; Reset Switch Reset; IC Card Slot IC card front side(with IC)facing up as inserting; Speaker Audio remind Rubber Pad: Slippery and shock protection 2 SAM card and 1 SIM card under the battery SAM&SIM Slot cover Stylus Pen Input by handwriting; Barcode Scanner Barcode scanner for 1D or 2D;

Camera & Flash Image recognition & Exposure Fingerprint Sensor Fingerprint reader (optional); Phone Jack 3.5mm standard interface; Function Key Definable; Micro USB USB2.0(OTG); Battery Cover The position of the battery to lock; Wrist Band Convenient operation and bring; Rubber Pad: Slippery and shock protection Magcard Reader: The magnetic stripe at the bottom and facing the device support bi-direction card swiping; NO.4 Instructions And Precautions Power On 1、Insert the attached power adapter's connector to the MF-2351, linked the AC cord between the adapter and AC power supply socket; 2、Press the power key( )until LCD display booting information, system will setup after initialization. Swiping Card 1、Slide the magnetic card at stable speed, with the magnetic strip upward. 2、 Bi-directional card swiping is supported;

IC Card Read 1、 insert the IC card with the chip upward; IC Torn Paper 1、Hand and hold the end of the paper along the cutter from left to right around 45 degrees angle of the direction of the tear, the force should be quickly and evenly. Installation Of Paper 1、Open the paper bucket lid: Unlock the printer cover( ) by pulling the lever up; 2、Load the thermal paper after open the printer cover. Please notice the paper come from bottom side; 3、Align the sheet of paper out into the guide slot of the cuter, press the printer cover back until a "click" sound is heard; 4、To avoid a paper jam or damage the printer, please use standard printing paper provided by the bank. Notice 1、Use an outlet with a fuse; 2、Do not damage the power cord and adapter. They can not be used if damaged; 3、 When error occurs, please contact technical support. User's attempting to repair the device is not covered within warranty; 4、Before connecting the AC power cord to a power supply outlet, you should check voltage; 5、Do not insert anything into any of the interface of the device, it will seriously damage the device; 6、Do not place the device in direct sunlight, high temperature, humid or dusty place; 7、Please stay away from liquids 8、Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device has been tested and meets the FCC RF exposure guidelines. The maximum SAR value reported is 0.240 w/kg. Limited Channels fixed for use in the US: IEEE 802.11b or 802.11g or 802.11n(HT20) operation of this product in the U.S. is firmware-limited to Channel 1 through 11. IEEE 802.11n(HT40) operation of this product in the U.S. is firmware-limited to Channel 3 through 9.

NO.5 The test program instruction Caution: The power supply input for this unit is 9.0V and not 12V or 5V. If you want to change to another power supply in place of the one in the package, you need to be cautious and check the output voltage and current. Content: 1.MSR test 2.ICC test 3.Print test 4.RIF test 5.Wireless，WCDMA test 6.Wifi test 7.Screen test 8.Other functional test 9.Vibration test 10.The one-dimensional bar code test Double-click the 1 .MSR test. Click on the "MSR Read" "MF-2351_appapi_test.exe: Click the MSR button. and brush the magnetic stripe cards in the card slot. Successfully show：

2. ICC test. Click“ICC”. Insert IC card, if you want to test IC command (ICC Command), click on "IC Check". If IC card chip does not damage or contact with normal card slot, you can see the following: As the test described above, the user can see the other effect. 3. Printer test. You can see the current version of the NK. Select the appropriate font size print and note that the paper is placed correctly.

4 . RIF test，include A If you want to test M1 function, the first , put M1 on card，B card and M1 the RF sensing area, Click on the "M1 Check "to card. click the button. check card , if non-access module is hardware or the card is not damaged, you can see the following: Each of M1 data is stored in the sector. Each sector has its own key .If appear the "Authority M1 Card Err", when you use the " M1 Read the Write ", I lustrate the key Authentication is not passed. It is normal. 5. Wireless, WCDMA test. Click "Auto Dial”, wait for the POS automatically dial. If you have used WCDMA capabilities, you need to disconnect in order to continue to use this.

6. Wifi test. Firstly click network Select "Wireless Info”, check the "Notify when settings on the taskbar. new networks available” , connected to the network , enter the test program after the following effect appears: Click on the "power state" and finally the power is turned on again, then you can test the other features, click the button again to turn off wifi power. 7. Screen test. Test LCD Module. The first one is the lock screen, click the button, the screen will lock and screen automatically unlock after a few seconds. The second is the rotation of the screen, click the screen then it will rotate 90 degrees.

8. Other functional test. You can see the results after the click of a button. 9 . Vibration test. Vibration testing can test motor is working properly or not. 10. The one-dimensional bar code test. Put the one-dimensional bar code on the location of about 5 cm from the scanning lamp， Screen will be prompted to read the one-dimensional bar code as shown above.

Tel:+886-2918-8500 Fax:+886-2915-3405 Partner Tech Corporation http://www.partner.com.tw 10FL, 233-2, Baoqiao Road, Xindian, New Taipei City, Taiwan Notice:Product specifications are subject to change without prior notice!


Document Created: 2013-05-20 10:43:19
Document Modified: 2013-05-20 10:43:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC