RF exposure 2 of 2 (802.11n)

FCC ID: NDD9576111029

RF Exposure Info

Download: PDF
FCCID_1416059

FCC TEST REPORT Report No.: FRODO219A!1 Appendix A. Maximum Permissible Exposure Page No. : A1 of A3 FCC ID : NDD9576111029

FCC TEST REPORT Report No.: FRODO219A!1 ble § Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure 0.3—3.0 614 1.63 (100) 6 3.0—30 1842 / f 4.89 / f (900 / f)* 6 30—300 61.4 0.163 1.0 6 300—1500 F/300 6 1500—100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3—1.34 614 1.63 (100)* 30 1.34—30 824/t 2. 19/f (180/%)* 30 30—300 27.5 0.073 0.2 30 300—1500 F/1500 30 1500—100,000 1.0 30 Note: f = frequency in MHz ; *Plane—wave equivalent power density MPE Calculation Method 2. E (V/m) = V30x PxG Power Density: Pd (W/im?) = d 377 E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to =30><P><G Pd 377 x d‘ From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A2 of A3 FCC ID : NDD9576111029

3.16


Document Created: 2011-02-10 15:51:03
Document Modified: 2011-02-10 15:51:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC