SAR attachment 2

FCC ID: NDD9573180519

RF Exposure Info

Download: PDF
FCCID_612411

Date/Time: 12/15/2005 11:16:33 AM Test Laboratory: Compliance Certification Services Inc. 802.11b Touch mode-2 DUT: EW-7318Ug; Type: 802.11g Wireless LAN PC Card; Serial: N/A Communication System: IEEE 802.11b WLAN; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.88 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section Air Temperature:24.5deg C;Liquid Temperature:23.4deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY4 Configuration: z Probe: EX3DV4 - SN3552 ; ConvF(6.94, 6.94, 6.94); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 10/19/2005 z Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1150 z Measurement SW: DASY4, V4.6 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 159 Middle CH Rate=1M bit/Area Scan (6x6x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.034 mW/g Middle CH Rate=1M bit/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 4.51 V/m; Power Drift = -1.81 dB Peak SAR (extrapolated) = 0.053 W/kg SAR(1 g) = 0.023 mW/g; SAR(10 g) = 0.00767 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.032 mW/g Page1



Document Created: 2005-12-15 11:59:43
Document Modified: 2005-12-15 11:59:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC