DTS-UNII Declaration letter

FCC ID: NDD9568771606

Cover Letter(s)

Download: PDF
FCCID_3278145

Company : Edimax Technology Co., Ltd.
Date: 2017/01/25

                                            DTS—UNII Device Declaration Letter
To whom it may concern:
We have declared below featured for FCC equipment authorization,
Device FCC ID: NDD9568771606


(1)          DFS Device —— —[_] Master , [C] Client with Redar detection capability ,
                 [—] Client without radar detection capability,   N/A

(2)          Active / Passive Scanning , adhoc mode access point capability
                  Frequency Band               Active Scanning             passive scanning             Ad Hoc Mode or           Access point
                        (MHz)              (the device can transmit    (where the device is can           WIFI Direct             capability
                                              a probe (beacon))            listen only with no             capability
                                                                                 probes)
                2412 — 2462MHz                    [_] Yes , 4 No             [_] Yes ,     No           [_] Yes , [q No         E] Yes , J No
                5150 — 5250MHz                    [] Yes ,    No             [_] Yes , D4 No            [_] Yes ,     No           Yes , [] No
                5725 — 5850MHz                    [{] Yes ,   No             [_] Yes , [] No            [_] Yes , 4 No             Yes , [_] No



(3)          Country code selection abllity — [_] Yes , [] No
If yes, pis explain how it was implemented : (pis also help to provide detail of optionsfor each country selection)

(4)          Meet 15.202 requirement — [X] Yes , [{] No ,
pis check below :
BJA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In
this mode it is able to select a channel and initiate a network by sending enabling signals to other devices
_A client device is defined as a device operating in a mode in which the transmissions of the device are undercontrol of the master. A device
in client mode is not able to initiate a network...

(5)          For client devices that have software configuration control to operate in different modes (active scanning in some and passive
scanning in others) in different bands (devices with multiple equipment classes or those that operate on non—DFS frequencies) or modular
devices which configure the modes of operations through software, the application must provide software and operations description on how
the software and / or hardware is implemented to ensure that properoperations modes can not be modified by end user or an installer.
LApply , "Yes, please see SW security Description‘. [] No Apply , (if apply , pis help to provide explanation on it was implement , and how
software was controlled)



Name / Title: Ms. Tracy         Cheng/ Senior Specialist
Signature:
Address: No.3,Wu—Chuan              Road,Wu—Ku Industrial Park, Taipei Hsien, Taiwan



Document Created: 2017-01-25 16:52:57
Document Modified: 2017-01-25 16:52:57

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC