RF Exposure Info (MPE)_rev 2.pdf

FCC ID: NDD9532311903

RF Exposure Info

Download: PDF
FCCID_4400600

                                                           RF Exposure Report

                       Report No.: SA190422C26 R1

                             FCC ID: NDD9532311903

                       Test Model: IC-3231GLP

                   Series Model: IC-S200WD

                 Received Date: Apr. 22, 2019

                         Test Date: May 08 ~ May 15, 2019

                     Issued Date: Aug. 14, 2019


                         Applicant: EDiMAX TECHNOLOGY CO., LTD.

                          Address: No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City 11494, Taiwan (R.O.C.)


                        Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

                    Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan
                                 (R.O.C.)
                  Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City
                                 33383, TAIWAN (R.O.C.)
         FCC Registration / 788550 / TW0003
       Designation Number:




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth ourfindings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.
The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.

Report No.: SA190422C26 R1                            Page No. 1 / 5                                                            Report Format Version: 6.1.1
Cancels and replaces the report no.: SA190422C26 dated May 23, 2019


                                                                   Table of Contents
Release Control Record .................................................................................................................................. 3
1         Certificate of Conformity...................................................................................................................... 4
2         RF Exposure .......................................................................................................................................... 5
    2.1      Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5
    2.2      MPE Calculation Formula ................................................................................................................... 5
    2.3      Classification ....................................................................................................................................... 5
3         Calculation Result of Maximum Conducted Power........................................................................... 5




Report No.: SA190422C26 R1                            Page No. 2 / 5                                                             Report Format Version: 6.1.1
Cancels and replaces the report no.: SA190422C26 dated May 23, 2019


                                                Release Control Record


Issue No.                Description                                            Date Issued
SA190422C26              Original release                                       May 23, 2019
SA190422C26 R1           Revised address of applicant                           Aug. 14, 2019




Report No.: SA190422C26 R1                            Page No. 3 / 5     Report Format Version: 6.1.1
Cancels and replaces the report no.: SA190422C26 dated May 23, 2019


1    Certificate of Conformity


             Product: Wireless 802.11a/b/g/n/ac Dual Band IP Camera

               Brand: EDIMAX

         Test Model: IC-3231GLP

       Series Model: IC-S200WD

     Sample Status: Engineering sample

           Applicant: EDiMAX TECHNOLOGY CO., LTD.

           Test Date: May 08 ~ May 15, 2019

          Standards: FCC Part 2 (Section 2.1091)
                          KDB 447498 D01 General RF Exposure Guidance v06
                          IEEE C95.1-1992



The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s RF characteristics under the conditions specified in this report.




      Prepared by :                                                    , Date:   Aug. 14, 2019
                               Celine Chou / Senior Specialist




      Approved by :                                                    , Date:   Aug. 14, 2019
                               Bruce Chen / Project Engineer




Report No.: SA190422C26 R1                            Page No. 4 / 5                  Report Format Version: 6.1.1
Cancels and replaces the report no.: SA190422C26 dated May 23, 2019


2     RF Exposure
2.1 Limits for Maximum Permissible Exposure (MPE)
    Frequency Range           Electric Field           Magnetic Field             Power Density            Average Time
         (MHz)               Strength (V/m)            Strength (A/m)               (mW/cm2)                 (minutes)
                               Limits For General Population / Uncontrolled Exposure

       300-1500                     …                         …                      F/1500                       30

     1500-100,000                   …                         …                        1.0                        30
F = Frequency in MHz

2.2 MPE Calculation Formula
Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
pi = 3.1416
r = distance between observation point and center of the radiator in cm

2.3 Classification
The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So,
this device is classified as Mobile Device.


3     Calculation Result of Maximum Conducted Power
Frequency Band           Max Power           Antenna Gain              Distance       Power Density               Limit
    (MHz)                  (dBm)                 (dBi)                   (cm)           (mW/cm2)                (mW/cm2)
                                                            WLAN

     2412-2462              23.03                  1.8                   20                  0.060                   1

     5180-5240              20.13                  4.0                   20                  0.051                   1

     5745-5825              21.73                  4.0                   20                  0.074                   1

                                                              BT

     2402-2480               9.01                  1.8                   20                  0.002                   1

                                                            BT LE

     2402-2480               5.67                  1.8                   20                  0.001                   1
Note: Determining compliance based on the results of the compliance measurement, not taking into account
measurement instrumentation uncertainty.



---END---




Report No.: SA190422C26 R1                            Page No. 5 / 5                                 Report Format Version: 6.1.1
Cancels and replaces the report no.: SA190422C26 dated May 23, 2019



Document Created: 2019-08-14 18:10:25
Document Modified: 2019-08-14 18:10:25

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC