User Manual

FCC ID: NCI-VESHPD01A1

Users Manual

Download: PDF
FCCID_2845520

1. SHP-D01 Specifications 2. SHP-D01 Front/Side panel 3. SHP-D01 back panel Quick Guide Item Description Front panel and size mm Camera 500 megapixel wide- DC-In power SHP-D01 angle color lens Brightness exposure LED Door Station Reader (RFID) Support 13.56MHz, Side panel Adjustment of camera ISO14443A standard and size RJ45 port Product Information mm Network Interface RJ-45 Model: SHP-D01 mm RS485 port Package Lists: Network transmis- 10/100M -SHP-D01 door station X 1 sion rate -RS485 cable X 1 Purple Power DC-12V Red black brow -DIO cable X 1 Green LED Red LED Power consump- <10W Green LED ON: normal operation -M4 * 30mm screw X 3 tion Green LED flash: booting -8mm brass pipe + spring X 1 ring DIO port switch Operating tem- 0~40° Red LED ON: ○ 1 Enable home or -Quick Guide X 1 egress security perature ○ 2 Anti-dismantle has been triggered Humidity 0~95%, non-condensing ○ 3 Security has been triggered ○ 4 Force status has been triggered mm DIO pin definition 4. Relay connection (use Note: Note: 5. SHP-D01 Installation steps 1. This diagram is for reference only, please 1. Put brass pipe + spring on the embedded box, OMRON MY2-J Relay as an see DIO definition for actual connection. as indicated in the ○ 1 . example) 2. Max. value of motion for DIO is 400mA. 2. Distance between bottom of the embedded Yellow Bleu Purple Grey White Orange Green black Red brow 3. DI can externally connect to spring switch box and the ground is 132 cm. and NC of the dry contact. If the same DI needs to use 2 or more spring switches, connect by series. Alarm speaker 4. DI that externally connects to switch (eg, DIO definition doorbell, emergency pressure deduction) and DI1 reserved reserved gas detector, can connect to NO. To use 2 or ○ 1 DI2 reserved reserved more devices, connect by series. DO1 Open the Connect NO 5. If DI2 of the door station is not connected door Relay default status to door detector, please short DI2 and is On DI2GND. Dry Contact switch DO2 reserved reserved DO3 reserved reserved 6. When DO connects to electric lock, power 132 cm supply locks, interruption of power supply unlocks. 7. When DO connects to alarm, alarm connects to Relay NO, motion on Relay will enable the alarm.

3. Remove two M2 screws from the bottom of 4. Use M4 screw to fix the main part. 6. Put the front plaque and plate back. Fix the the plaque. Take off the plate in order to separate bottom with two M2 screws. 6. SHP-D01 installation diagram 5. Distance between bottom of the door station the plaque and the main part. and the ground is 131 cm. Please consider the RFID area Angle of view 60° 179.6 cm thickness of the tile or marble. (within Assistant rectangular Exposure 145 cm area ) light Height between 69.2 cm lens lens and ground 110.4 cm key 60 cm Distance between lens and subject plate M2 screw M2 screw Note: Note: M2 screw M2 screw 1. Be careful of the orientation during 131 cm installation. 2. Please do not install any other device close to the door station, keep at least 10 cm of distance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause. CAUTION! To prevent shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified personnel. VIA Technologies, Inc. 1F, 531, Zhong-zheng Road, Xindian District, New Taipei City For more information on this and other VIA products, please visit : 231, Taiwan www.viatech.com/en/ Tel: 886-2-2218-5452 Fax: 886-2-2218-5453 Copyright © 2015 VIA Technologies, Inc. All rights reserved.


Document Created: 2015-11-23 18:08:34
Document Modified: 2015-11-23 18:08:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC