MPE

FCC ID: NCI-P650IVF02-0

RF Exposure Info

Download: PDF
FCCID_4152121

FCC ID: NCI-P650IVF02-0 Page: 1 / 8 Report No.: T180801N05-MF Rev.: 00 IEEE C95.1 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For 60 Inch TFT-LCD Display Model: P650IVF02.0 Trade Name: Issued to VIA Technologies, Inc. 8F, No.535, Zhongzheng Rd., Xindian Dist, New Taipei City 231, Taiwan(R.O.C) Issued By Compliance Certification Services Inc. Tainan Laboratory No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) TEL: 886-6-580-2201 FAX: 886-6-580-2202 http://www.ccsrf.com E-Mail : service@ccsrf.com Issued Date: September 25, 2018 No.8, Jiucengling, Xinhua District, Tainan City 712, Taiwan / 71249 台南市新化區礁坑里九層嶺 8 號 t:(886-6) 5802-201 f:(886-6) 5802-202 www.sgs.tw www.ccsrf.com

Page: 2 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 September 25, 2018 Initial Issue ALL Daphne Liang

Page: 3 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ........................................................................ 4 2. LIMIT .................................................................................................................... 5 3. EUT SPECIFICATION.......................................................................................... 5 4. TEST RESULTS .................................................................................................. 7 5. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 8

Page: 4 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 1. TEST RESULT CERTIFICATION We hereby certify that: The equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirement of the applicable standards. The test record, data evaluation and Equipment under Test (EUT) configurations represented herein are true and accurate accounts of the measurement of the sample’s RF characteristics under the conditions specified in this report. APPLICABLE STANDARDS STANDARD TEST RESULT IEEE C95.1 2005 KDB 447498 D03 No non-compliance noted 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 Approved by: Reviewed by: Jeter Wu Eric Huang Assistant Manager Section Manager

Page: 5 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 2. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 3. EUT SPECIFICATION EUT 60 Inch TFT-LCD Display Model P650IVF02.0 Trade Name Model Discrepancy N/A 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11n HT40: 2.422GHz ~ 2.452GHz Frequency band 802.11a, 802.11n HT20 : 5180MHz ~ 5240MHz; 5745 ~ 5825MHz (Operating) 802.11n HT40 : 5190MHz ~ 5230MHz; 5755 ~ 5795MHz 802.11ac VHT80 : 5210MHz; 5755MHz Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) Exposure General Population/Uncontrolled exposure classification (S=1mW/cm2) Antenna (1TX1RX), 2pcs Manufacturer: WIFI-Link Technologies Inc. Type: PCB Antenna Mode: WLDF-5024-07-07 Specification Gain：5dBi (2.4G) / 7dBi (5G) Antenna Gain 2.4GHz 5.00 dBi (Numeric gain: 3.16) worst Antenna Gain 5GHz 7.00 dBi (Numeric gain: 5.01) worst IEEE 802.11b Mode : 18.03 dBm (63.533 mW) IEEE 802.11g Mode : 13.00 dBm (19.953 mW) IEEE 802.11n HT20 Mode : 12.39 dBm (17.338 mW) Maximum Average IEEE 802.11n HT40 Mode : 12.15 dBm (16.406 mW) output power IEEE 802.11a Mode : 13.15 dBm (20.654 mW) IEEE 802.11n HT20 Mode: 13.49 dBm (22.336 mW) IEEE 802.11n HT40 Mode: 12.45 dBm (17.579 mW) IEEE 802.11AC HT80 Mode: 12.02 dBm (15.922 mW)

Page: 6 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 IEEE 802.11b Mode : 19.03 dBm (79.983 mW) IEEE 802.11g Mode : 14.00 dBm (25.119 mW) IEEE 802.11n HT20 Mode : 13.39 dBm (21.827 mW) Maximum IEEE 802.11n HT40 Mode : 13.15 dBm (20.654 mW) Tune up Power IEEE 802.11a Mode : 14.15 dBm (26.002 mW) IEEE 802.11n HT20 Mode: 14.49 dBm (28.120 mW) IEEE 802.11n HT40 Mode: 13.45 dBm (22.131 mW) IEEE 802.11AC HT80 Mode: 13.02 dBm (20.045 mW) MPE Evaluation* Evaluation applied SAR Evaluation N/A Notes: For 2.4GHz and 5GHz could not be use as transmit/receive at the same time.

Page: 7 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 4. TEST RESULTS No non-compliance noted. Calculation 30  P  G E2 Given E & S d 377 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S 377 d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  P / 1000  G PG S  0.0796  2 Equation 1 377  d / 100 2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2

Page: 8 / 8 Report No.: T180801N05-MF Ref. No.: Rev.: 00 5. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: S  0.000199  P  G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b Mode : Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Low 2412 79.983 3.16 20 0.0503 1 Pass IEEE 802.11g Mode : Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Mid 2437 25.119 3.16 20 0.0158 1 Pass IEEE 802.11n HT 20 Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Mid 2437 21.827 3.16 20 0.0137 1 Pass IEEE 802.11n HT 40 Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Mid 2437 20.654 3.16 20 0.0130 1 Pass IEEE 802.11a Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Mid 5785 26.002 5.01 20 0.0259 1 Pass IEEE 802.11n HT20 Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result High 5825 28.120 5.01 20 0.0280 1 Pass IEEE 802.11n HT40 Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result High 5795 22.131 5.01 20 0.0221 1 Pass IEEE 802.11AC HT80 Mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) Result Mid 5775 20.045 5.01 20 0.0200 1 Pass


Document Created: 2018-09-26 15:35:45
Document Modified: 2018-09-26 15:35:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC