12016445-E2V3 FCCIC Report MPE_Final

FCC ID: NATRXK123716

RF Exposure Info

Download: PDF
FCCID_3870972

CERTIFICATION TEST REPORT Report Number. : 12016445-E2V3 Applicant : BENDIX COMMERCIAL VEHICLE SYSTEMS LLC #2110 – 6900 GRAYBAR ROAD RICHMOND, B. C. V6W 0A5 CANADA FCC ID : NATRXK123716 ISED : 3323A-K123716 EUT Description : 433.92 MHz TRANSCEIVER Test Standard(s) : FCC Part 1 Subpart I FCC Part 2 Subpart J ISED RSS 102 ISSUE 5 Date Of Issue: MARCH 15, 2018 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 NVLAP LAB CODE 200065-0

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 REPORT REVISION HISTORY Issue Rev. Date Revisions Revised By V1 1/11/2018 Initial Issue -- V2 2/6/2018 Sec. 6: Updated Table. Bobby Bayani V3 3/15/2018 Sec. 1: Updated Models and ISED Number Bobby Bayani Page 2 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 6 3. REFERENCES ................................................................................................................... 6 4. FACILITIES AND ACCREDITATION ................................................................................. 6 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 7 5.1. FCC RULES ................................................................................................................ 7 5.2. IC RULES .................................................................................................................... 8 5.3. EQUATIONS................................................................................................................ 9 5.4. LIMITS AND IC EXEMPTION .....................................................................................11 6. RF EXPOSURE RESULTS ................................................................................................12 Page 3 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 1. ATTESTATION OF TEST RESULTS COMPANY NAME: BENDIX COMMERCIAL VEHICLE SYSTEMS LLC #2110 – 6900 GRAYBAR ROAD RICHMOND, B. C. V6W 0A5 CANADA EUT DESCRIPTION: 433.92 MHZ TRANSCEIVER MODELS: K123716, K138357, K138362, K138367 SERIAL NUMBER: 0000207, 0000260 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies ISED RSS 102 ISSUE 5 Complies UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Page 4 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 Reviewed By: Prepared By: Bobby Bayani Jason Qian Lead Project Engineer Test Engineer UL Verification Service Inc. UL Verification Services Inc. Approved & Released For UL Verification Services Inc By: Thu Chan Operations Leader UL Verification Service Inc. Page 5 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test reports UL Verification Services. Documents 12016445-E1V1 for frequency operating in the 433.92 MHz. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0 Page 6 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. TABLE 1—LIMITS FOR M AXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time 2 (MHz) (V/m) (A/m) (mW/cm ) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 2 3.0-30 1842/f 4.89/f *900/f 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 2 1.34-30 824/f 2.19/f *180/f 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Notes: (1) Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. (2) General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure Page 7 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 5.2. IC RULES For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6. Page 8 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 9 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 10 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) S = 0.02619 ƒ 0.6834 W/m^2 (IC). FIXED LIMITS For operation in the frequency of 433.92MHz. From FCC §1.1310 Table 1 (B), the maximum value of S = f/1500 mW/cm^2 From IC Safety Code 6, Section 4 Table 4 Column 4, S = 0.02619 ƒ 0.6834 W/m^2 INDUSTRY CANADA EXEMPTION RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. Page 11 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12016445-E2V3 DATE: MARCH 15, 2018 FCC ID: NATRXK123716 IC: 3323A-K123716 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. Single Chain and non-colocated transmitters Band Mode Separatio Output Antenna EIRP FCC Power IC Power n Distance AVG Gain Density Density Power (cm) (dBm) (dBi) (mW) (mW/cm^2) (W/m^2) 434.0 Normal 20 -23.54 0.00 0.0 0.00000014 0.0000014 At or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; therefore, the device is exempted from routine RF exposure evaluation. Notes: 1) For MPE the new KDB 447498 requires the calculations to use the maximum rated power; that power should be declared by the manufacturer, and should not be lower than the measured power. If the power has a tolerance then we also need to check that the measured power is within the tolerance. 2) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. END OF REPORT Page 12 of 12 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2018-03-15 17:03:34
Document Modified: 2018-03-15 17:03:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC